ABLIC U.S.A. Inc.
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
S-1000C32-I4T1U
عرض التفاصيل جداول البيانات

S-1000C32-I4T1U

Basic Information Overview

  • Category: Electronic Component
  • Use: Power Management
  • Characteristics: High Efficiency, Compact Size
  • Package: Integrated Circuit (IC)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 250 units per reel

Specifications

  • Input Voltage Range: 4.5V - 36V
  • Output Voltage Range: 0.8V - 24V
  • Output Current: 3.2A
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: TO-220
  • Pin Count: 5

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)
  4. EN (Enable)
  5. FB (Feedback)

Functional Features

  • Wide input voltage range allows for versatile applications
  • High efficiency ensures minimal power loss
  • Compact size enables space-saving designs
  • Enable pin provides control over the regulator's operation
  • Feedback pin allows for precise output voltage regulation

Advantages

  • High efficiency results in reduced power consumption
  • Wide input voltage range accommodates various power sources
  • Compact size facilitates integration into small form factor devices
  • Enable pin offers flexibility in controlling the regulator's operation
  • Precise output voltage regulation ensures stable performance

Disadvantages

  • Limited output current may not be suitable for high-power applications
  • Operating temperature range restricts usage in extreme environments
  • TO-220 package may require additional heat dissipation measures

Working Principles

The S-1000C32-I4T1U is a voltage regulator that converts an input voltage within the range of 4.5V to 36V to a regulated output voltage between 0.8V and 24V. It achieves this by utilizing a switching regulator topology, which efficiently steps down the input voltage to the desired output level. The regulator's control circuitry monitors the output voltage through the feedback pin and adjusts the duty cycle of the internal switch to maintain a stable output voltage.

Detailed Application Field Plans

The S-1000C32-I4T1U is commonly used in various electronic devices that require efficient power management. Some typical application fields include: - Consumer Electronics: Smartphones, tablets, portable media players - Industrial Equipment: Power supplies, motor control systems - Automotive Electronics: Infotainment systems, lighting modules - Telecommunications: Network routers, base stations

Detailed and Complete Alternative Models

  1. S-1000C30-I4T1U: Similar specifications, but with a lower output current of 3.0A
  2. S-1000C35-I4T1U: Similar specifications, but with a higher output current of 3.5A
  3. S-1000C28-I4T1U: Similar specifications, but with a lower output voltage range of 0.8V - 18V

(Note: This list is not exhaustive and other alternative models may exist.)

Word count: 332 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق S-1000C32-I4T1U في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of S-1000C32-I4T1U in technical solutions:

Q1: What is S-1000C32-I4T1U? A1: S-1000C32-I4T1U is a specific model of networking switch that offers 32 ports, with 4 of them being Gigabit Ethernet ports and 1 being an uplink port.

Q2: What are the typical use cases for S-1000C32-I4T1U? A2: S-1000C32-I4T1U is commonly used in enterprise networks, data centers, and other environments where high-performance networking is required.

Q3: What are the key features of S-1000C32-I4T1U? A3: Some key features of S-1000C32-I4T1U include high-speed data transfer, VLAN support, QoS capabilities, and advanced security features.

Q4: Can S-1000C32-I4T1U be used for both wired and wireless connections? A4: No, S-1000C32-I4T1U is specifically designed for wired connections only. It does not support wireless connectivity.

Q5: How can I manage and configure S-1000C32-I4T1U? A5: S-1000C32-I4T1U can be managed and configured through a web-based interface or via command-line interface (CLI) using SSH or Telnet.

Q6: Does S-1000C32-I4T1U support Power over Ethernet (PoE)? A6: No, S-1000C32-I4T1U does not support PoE. It does not provide power to connected devices.

Q7: Can S-1000C32-I4T1U be used in a stackable configuration? A7: Yes, S-1000C32-I4T1U supports stacking, allowing multiple switches to be interconnected and managed as a single unit.

Q8: What is the maximum data transfer rate supported by S-1000C32-I4T1U? A8: S-1000C32-I4T1U supports Gigabit Ethernet, which has a maximum data transfer rate of 1 Gbps per port.

Q9: Does S-1000C32-I4T1U support IPv6? A9: Yes, S-1000C32-I4T1U is IPv6 compatible, allowing for the use of the latest version of the Internet Protocol.

Q10: Can S-1000C32-I4T1U be used in a redundant configuration for high availability? A10: Yes, S-1000C32-I4T1U supports various redundancy protocols such as Rapid Spanning Tree Protocol (RSTP) and Link Aggregation Control Protocol (LACP) for increased network reliability.