S-80809CLPF-B7NTFU
Product Overview
Category
S-80809CLPF-B7NTFU belongs to the category of electronic components.
Use
This product is commonly used in electronic circuits for voltage regulation and power management.
Characteristics
- Voltage regulation capability
- Low power consumption
- Compact size
- High reliability
Package
The S-80809CLPF-B7NTFU comes in a small surface-mount package, which allows for easy integration into circuit boards.
Essence
The essence of this product lies in its ability to regulate voltage efficiently and reliably, ensuring stable power supply to electronic devices.
Packaging/Quantity
The S-80809CLPF-B7NTFU is typically packaged in reels or tubes, with a quantity of 1000 units per package.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage Options: 1.2V, 1.5V, 1.8V, 2.5V, 3.0V, 3.3V, 5.0V
- Output Current: Up to 100mA
- Quiescent Current: 1µA (max)
- Dropout Voltage: 150mV (typ)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-80809CLPF-B7NTFU has the following pin configuration:
- VOUT: Output Voltage
- GND: Ground
- VIN: Input Voltage
Functional Features
- Voltage regulation: The S-80809CLPF-B7NTFU ensures a stable output voltage regardless of input voltage fluctuations.
- Low power consumption: This component consumes minimal power during operation, making it suitable for battery-powered devices.
- Overcurrent protection: It incorporates overcurrent protection to safeguard the connected circuitry.
- Thermal shutdown: The device automatically shuts down in case of excessive temperature, preventing damage.
Advantages and Disadvantages
Advantages
- High voltage regulation accuracy
- Low dropout voltage
- Compact size for space-constrained applications
- Wide operating temperature range
Disadvantages
- Limited output current capacity (up to 100mA)
- Restricted input voltage range (2.5V - 6.0V)
Working Principles
The S-80809CLPF-B7NTFU utilizes a voltage reference, error amplifier, and pass transistor to regulate the output voltage. It compares the feedback voltage with the reference voltage and adjusts the pass transistor accordingly to maintain the desired output voltage.
Detailed Application Field Plans
The S-80809CLPF-B7NTFU finds application in various electronic devices, including: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices
Detailed and Complete Alternative Models
- S-80809CNPF-B7NTFU
- S-80809CLMC-B7NTFU
- S-80809ALMP-B7NTFU
- S-80809ANUPF-B7NTFU
- S-80809BLPF-B7NTFU
These alternative models offer similar functionality and characteristics, providing flexibility in design choices.
In conclusion, the S-80809CLPF-B7NTFU is an electronic component used for voltage regulation and power management. Its compact size, low power consumption, and high reliability make it suitable for various electronic applications. While it has limitations in terms of output current capacity and input voltage range, it offers precise voltage regulation and thermal protection. With its wide range of alternative models, designers have multiple options to choose from based on their specific requirements.
قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق S-80809CLPF-B7NTFU في الحلول التقنية
Sure! Here are 10 common questions and answers related to the application of S-80809CLPF-B7NTFU in technical solutions:
Q: What is S-80809CLPF-B7NTFU? A: S-80809CLPF-B7NTFU is a voltage detector IC (integrated circuit) manufactured by a specific company. It is commonly used in various technical solutions to monitor and detect voltage levels.
Q: What is the operating voltage range of S-80809CLPF-B7NTFU? A: The operating voltage range of S-80809CLPF-B7NTFU is typically between X volts and Y volts. Please refer to the datasheet for the exact specifications.
Q: How does S-80809CLPF-B7NTFU work? A: S-80809CLPF-B7NTFU works by continuously monitoring the input voltage and comparing it to a preset threshold. When the voltage exceeds or falls below this threshold, the output of the IC changes state, indicating the detection of an overvoltage or undervoltage condition.
Q: What is the output configuration of S-80809CLPF-B7NTFU? A: S-80809CLPF-B7NTFU has an open-drain output configuration, which means that it can sink current but cannot source current. An external pull-up resistor is required to provide the output voltage level.
Q: Can S-80809CLPF-B7NTFU be used in automotive applications? A: Yes, S-80809CLPF-B7NTFU is suitable for automotive applications as it meets the necessary standards and requirements for automotive use.
Q: What is the typical response time of S-80809CLPF-B7NTFU? A: The typical response time of S-80809CLPF-B7NTFU is usually in the range of a few microseconds, ensuring quick detection and response to voltage changes.
Q: Can S-80809CLPF-B7NTFU be used in low-power applications? A: Yes, S-80809CLPF-B7NTFU is designed to operate with low power consumption, making it suitable for use in battery-powered or energy-efficient devices.
Q: What is the temperature range within which S-80809CLPF-B7NTFU can operate? A: S-80809CLPF-B7NTFU has an operating temperature range of -40°C to +85°C, allowing it to function reliably in a wide range of environmental conditions.
Q: Does S-80809CLPF-B7NTFU have any built-in protection features? A: Yes, S-80809CLPF-B7NTFU incorporates various protection features such as overcurrent protection, thermal shutdown, and reverse polarity protection to ensure safe operation and prevent damage to the IC.
Q: Are there any application notes or reference designs available for S-80809CLPF-B7NTFU? A: Yes, the manufacturer provides application notes and reference designs that offer guidance on how to effectively integrate and utilize S-80809CLPF-B7NTFU in different technical solutions. These resources can be found on their website or obtained from their technical support team.