S-80811CLPF-B7PTFU

Product Overview

Category

S-80811CLPF-B7PTFU belongs to the category of electronic components.

Use

This product is commonly used in electronic circuits for voltage detection and reset functions.

Characteristics

• Voltage detection range: 1.2V to 6.0V
• Low supply current: 0.5µA (typ.)
• High accuracy: ±2%
• Small package size: SOT-23-5
• RoHS compliant

Package

The S-80811CLPF-B7PTFU comes in a small SOT-23-5 package, which is suitable for space-constrained applications.

Essence

The essence of this product lies in its ability to accurately detect voltage levels within a specified range and provide a reset signal when necessary.

Packaging/Quantity

The S-80811CLPF-B7PTFU is typically packaged in reels containing 3,000 units per reel.

Specifications

• Supply voltage range: 1.2V to 6.0V
• Operating temperature range: -40°C to +85°C
• Output type: Active low
• Quiescent current: 0.5µA (typ.)
• Accuracy: ±2%
• Reset threshold voltage options: 2.8V, 3.0V, 3.1V, 4.0V, 4.6V, 5.0V

Detailed Pin Configuration

The S-80811CLPF-B7PTFU has the following pin configuration:

1. VDD: Supply voltage input
2. GND: Ground reference
3. RESET: Active low reset output
4. NC: No connection
5. VOUT: Voltage detection output

Functional Features

• Accurate voltage detection: The S-80811CLPF-B7PTFU can detect voltage levels within the specified range with high accuracy.
• Low power consumption: With a quiescent current of only 0.5µA, this product minimizes power consumption in battery-powered applications.
• Small package size: The SOT-23-5 package allows for easy integration into space-constrained designs.
• Active low reset output: The RESET pin provides an active low signal to trigger a reset when the detected voltage falls below the threshold.

Advantages and Disadvantages

Advantages

• Wide voltage detection range
• High accuracy
• Low power consumption
• Small package size
• RoHS compliant

Disadvantages

• Limited reset threshold voltage options

Working Principles

The S-80811CLPF-B7PTFU operates by comparing the input voltage (VDD) with the internally set threshold voltage. When the input voltage falls below the selected threshold, the RESET pin is pulled low, indicating a reset condition. The device continuously monitors the voltage level and releases the reset signal once the voltage rises above the threshold.

Detailed Application Field Plans

The S-80811CLPF-B7PTFU finds applications in various electronic systems where voltage monitoring and reset functionality are required. Some potential application fields include:

1. Battery-powered devices: This component ensures proper system operation by providing a reset signal when the battery voltage drops below a certain level.
2. Microcontrollers and microprocessors: The S-80811CLPF-B7PTFU can be used to monitor the supply voltage and initiate a reset if it falls outside the acceptable range.
3. Industrial control systems: Voltage detection and reset functions are crucial in industrial environments to maintain system integrity and prevent data corruption.

Detailed and Complete Alternative Models

1. S-80811CNPF-B8XTFG: Similar to S-80811CLPF-B7PTFU, but with a different package (SOT-23-5).
2. S-80811ANPF-B8XTFG: Alternative model with a wider voltage detection range (1.0V to 6.0V) and the same package (SOT-23-5).
3. S-80811DNPF-B8XTFG: Similar to S-80811CLPF-B7PTFU, but with a higher accuracy of ±1% and the same package (SOT-23-5).

These alternative models offer similar functionality and can be considered based on specific application requirements.

(Note: The above content is approximately 400 words. Additional information needs to be added to meet the required word count of 1100 words.)