S-80927CLNB-G6XT2G belongs to the category of integrated circuits (ICs).
This IC is commonly used in electronic devices for voltage detection and monitoring purposes.
The S-80927CLNB-G6XT2G is available in a small surface-mount package, making it suitable for compact electronic designs.
The essence of this product lies in its ability to accurately detect and monitor voltage levels in electronic circuits.
The S-80927CLNB-G6XT2G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.
The S-80927CLNB-G6XT2G has the following pin configuration:
The S-80927CLNB-G6XT2G operates by comparing the input voltage with a reference voltage. When the input voltage falls below the threshold, the output is activated, indicating an undervoltage condition.
The S-80927CLNB-G6XT2G finds applications in various electronic devices and systems, including: 1. Battery-powered devices 2. Power management circuits 3. Embedded systems 4. Consumer electronics 5. Industrial control systems
These alternative models offer similar functionality and characteristics, providing options for specific application requirements.
Word count: 315 words
Sure! Here are 10 common questions and answers related to the application of S-80927CLNB-G6XT2G in technical solutions:
1. What is the operating voltage range of S-80927CLNB-G6XT2G? - The operating voltage range of S-80927CLNB-G6XT2G is 2.0V to 6.0V.
2. What is the typical quiescent current consumption of this device? - The typical quiescent current consumption of S-80927CLNB-G6XT2G is 1.0µA.
3. Can I use this voltage detector for battery-powered applications? - Yes, S-80927CLNB-G6XT2G is suitable for battery-powered applications due to its low quiescent current consumption.
4. What is the output type of this voltage detector? - S-80927CLNB-G6XT2G has an open-drain output type.
5. What is the maximum output sink current of this device? - The maximum output sink current of S-80927CLNB-G6XT2G is 50mA.
6. Is this voltage detector suitable for automotive applications? - Yes, S-80927CLNB-G6XT2G is AEC-Q100 qualified and can be used in automotive applications.
7. Does this device have a built-in delay circuit? - Yes, S-80927CLNB-G6XT2G has a built-in delay circuit with a fixed delay time of 200ms.
8. Can I use this voltage detector for overvoltage protection? - No, S-80927CLNB-G6XT2G is not designed for overvoltage protection. It is primarily used for undervoltage detection.
9. What is the operating temperature range of this device? - The operating temperature range of S-80927CLNB-G6XT2G is -40°C to +85°C.
10. Does this voltage detector have a built-in hysteresis? - Yes, S-80927CLNB-G6XT2G has a built-in hysteresis of typically 0.1V, which helps prevent output oscillation near the threshold voltage.
Please note that these answers are based on general information about S-80927CLNB-G6XT2G and may vary depending on the specific application and requirements.