S-80934CLMC-G64T2G

Product Overview

Category

S-80934CLMC-G64T2G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage detection and reset functions.

Characteristics

• Voltage detection range: 1.0V to 6.0V
• Low supply current: 1.0μA (typical)
• Small package size: SOT-23-5
• Built-in delay circuit
• High accuracy voltage detection

Package and Quantity

The S-80934CLMC-G64T2G is packaged in a SOT-23-5 package. Each package contains one unit of the IC.

Essence

The essence of S-80934CLMC-G64T2G lies in its ability to accurately detect voltage levels within a specified range and provide a reset signal when necessary.

Specifications

• Supply Voltage Range: 1.0V to 6.0V
• Operating Temperature Range: -40°C to +85°C
• Output Type: Active low
• Reset Threshold Accuracy: ±1.0%
• Quiescent Current: 1.0μA (typical)

Detailed Pin Configuration

The S-80934CLMC-G64T2G has the following pin configuration:

```

---

| | --|----|-- |____| ```

Pin 1: VDD (Supply Voltage) Pin 2: GND (Ground) Pin 3: RESET (Reset Output) Pin 4: MR (Manual Reset Input) Pin 5: VOUT (Voltage Detection Output)

Functional Features

• Accurate voltage detection within the specified range
• Provides a reset signal when the voltage falls below the threshold
• Built-in delay circuit to prevent false resets
• Manual reset input for external control

Advantages and Disadvantages

Advantages

• Wide voltage detection range
• Low supply current consumption
• Small package size for space-constrained applications
• High accuracy voltage detection

Disadvantages

• Limited number of pins for additional functionalities
• Requires an external manual reset input for certain applications

Working Principles

The S-80934CLMC-G64T2G operates by continuously monitoring the supply voltage. When the voltage falls below a preset threshold, the IC generates a reset signal on the RESET pin. The built-in delay circuit ensures that the reset signal is stable and prevents false resets due to temporary voltage fluctuations.

Detailed Application Field Plans

The S-80934CLMC-G64T2G finds applications in various electronic devices where voltage detection and reset functions are required. Some potential application fields include:

1. Battery-powered devices: Ensures proper operation and prevents damage due to low battery voltage.
2. Microcontrollers and microprocessors: Provides a reliable reset signal during power-up or voltage drops.
3. Industrial control systems: Monitors power supply integrity and initiates system resets if necessary.
4. Automotive electronics: Protects sensitive components from voltage fluctuations and ensures proper functioning.

Detailed and Complete Alternative Models

1. S-80930CNMC-G8XT2G
2. S-80935CLMC-G6KT2G
3. S-80936CLMC-G7KT2G
4. S-80937CLMC-G5KT2G
5. S-80938CLMC-G6KT2G

These alternative models offer similar voltage detection and reset functionalities, but may differ in terms of specific characteristics, package sizes, or operating temperature ranges.

In conclusion, the S-80934CLMC-G64T2G is an integrated circuit designed for accurate voltage detection and reset functions. Its wide voltage range, low power consumption, and small package size make it suitable for various electronic applications. However, it has a limited number of pins and requires an external manual reset input in certain scenarios.