RL1003-13.8K-122-D1
Product Category: Passive Electronic Component
Basic Information Overview: - Category: Resistor - Use: RL1003-13.8K-122-D1 is a surface mount resistor used in electronic circuits to limit current flow. - Characteristics: This resistor has a power rating of 0.125W, a resistance value of 13.8K ohms, and a tolerance of 0.5%. It is designed for use in various electronic applications. - Package: The RL1003-13.8K-122-D1 comes in a compact surface mount package. - Essence: It provides precise resistance in electronic circuits, ensuring proper current control. - Packaging/Quantity: Typically packaged in reels of 5000 units.
Specifications: - Power Rating: 0.125W - Resistance Value: 13.8K ohms - Tolerance: 0.5% - Package Type: Surface Mount
Detailed Pin Configuration: - The RL1003-13.8K-122-D1 has two terminals for soldering onto the circuit board. The pin configuration is standard for surface mount resistors.
Functional Features: - Precise resistance value - Compact size for space-constrained applications - Suitable for automated assembly processes
Advantages and Disadvantages: - Advantages: - Accurate resistance value - Small form factor - Compatible with automated assembly - Disadvantages: - Limited power handling capacity - Sensitive to overheating
Working Principles: The RL1003-13.8K-122-D1 works by impeding the flow of current in an electronic circuit, thereby controlling the amount of current passing through it.
Detailed Application Field Plans: This resistor is commonly used in various electronic devices such as consumer electronics, industrial equipment, and automotive electronics where precise current control is required.
Detailed and Complete Alternative Models: - RL1003-10K-122-D1: 10K ohm variant - RL1003-15K-122-D1: 15K ohm variant - RL1003-20K-122-D1: 20K ohm variant
This completes the entry for RL1003-13.8K-122-D1, providing comprehensive information about its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق RL1003-13.8K-122-D1 في الحلول التقنية
Sure, here are 10 common questions and answers related to the application of RL1003-13.8K-122-D1 in technical solutions:
What is the RL1003-13.8K-122-D1 used for?
- The RL1003-13.8K-122-D1 is a high-voltage resistor commonly used in power distribution and industrial applications.
What is the maximum voltage rating of the RL1003-13.8K-122-D1?
- The maximum voltage rating of the RL1003-13.8K-122-D1 is 13.8 kilovolts (13.8kV).
What is the power rating of the RL1003-13.8K-122-D1?
- The power rating of the RL1003-13.8K-122-D1 is typically 122 watts.
What are the typical applications for the RL1003-13.8K-122-D1?
- Typical applications include voltage dividers, surge protection circuits, and high-voltage measurement systems.
What is the temperature coefficient of the RL1003-13.8K-122-D1?
- The temperature coefficient is typically around 100 ppm/°C.
Is the RL1003-13.8K-122-D1 suitable for high-frequency applications?
- Yes, it can be used in high-frequency applications due to its stable performance.
Can the RL1003-13.8K-122-D1 be used in outdoor environments?
- Yes, it is designed to withstand outdoor conditions and has good environmental stability.
What are the mounting options for the RL1003-13.8K-122-D1?
- It can be mounted on PCBs or used as standalone components, depending on the specific application requirements.
Does the RL1003-13.8K-122-D1 require any special cooling mechanisms?
- It does not typically require special cooling mechanisms under normal operating conditions.
Are there any safety considerations when using the RL1003-13.8K-122-D1?
- Users should follow proper high-voltage safety protocols and guidelines when working with the RL1003-13.8K-122-D1 to ensure safe operation.
I hope these questions and answers are helpful for your technical solutions! Let me know if you need further assistance.