ADG728BRUZ-REEL7

Product Overview

Category

ADG728BRUZ-REEL7 belongs to the category of analog multiplexers/demultiplexers.

Use

This product is primarily used for signal routing and switching applications in various electronic systems.

Characteristics

• Analog multiplexer with 8 channels
• Low on-resistance: typically 4.5Ω at 5V supply voltage
• Wide supply voltage range: 1.8V to 5.5V
• Low power consumption: typically 0.5μA in power-down mode
• Fast switching time: typically 20ns

Package

ADG728BRUZ-REEL7 is available in a small outline package (SOIC) with 16 pins.

Essence

The essence of this product lies in its ability to efficiently route and switch analog signals in electronic circuits.

Packaging/Quantity

ADG728BRUZ-REEL7 is typically packaged in reels containing 2500 units.

Specifications

• Number of Channels: 8
• On-Resistance: 4.5Ω (typical)
• Supply Voltage Range: 1.8V to 5.5V
• Power Consumption (Power-Down Mode): 0.5μA (typical)
• Switching Time: 20ns (typical)

Detailed Pin Configuration

The pin configuration of ADG728BRUZ-REEL7 is as follows:

1. Channel 1 (CH1)
2. Channel 2 (CH2)
3. Channel 3 (CH3)
4. Channel 4 (CH4)
5. Channel 5 (CH5)
6. Channel 6 (CH6)
7. Channel 7 (CH7)
8. Channel 8 (CH8)
9. Ground (GND)
10. Supply Voltage (VDD)
11. Enable/Disable Control (EN)
12. Digital Input/Output 1 (D1)
13. Digital Input/Output 2 (D2)
14. Digital Input/Output 3 (D3)
15. Digital Input/Output 4 (D4)
16. Ground (GND)

Functional Features

• High channel count: ADG728BRUZ-REEL7 provides 8 channels for signal routing.
• Low on-resistance: The product offers low on-resistance, ensuring minimal signal distortion.
• Wide supply voltage range: It can operate within a wide range of supply voltages, making it compatible with various systems.
• Low power consumption: In power-down mode, the product consumes very low power, enhancing energy efficiency.
• Fast switching time: ADG728BRUZ-REEL7 enables rapid switching between channels, reducing latency in signal routing.

Advantages and Disadvantages

Advantages

• High channel count allows for versatile signal routing options.
• Low on-resistance ensures accurate signal transmission.
• Wide supply voltage range enhances compatibility with different systems.
• Low power consumption contributes to energy efficiency.
• Fast switching time reduces latency in signal routing.

Disadvantages

• Limited to analog signal routing applications.
• May not be suitable for high-frequency or high-speed digital signals.

Working Principles

ADG728BRUZ-REEL7 operates based on the principle of analog multiplexing. It uses MOSFET switches to connect one of the eight input channels to the output channel. The control inputs determine which channel is selected for routing the signal. When a specific channel is enabled, the corresponding MOSFET switch closes, allowing the signal to pass through.

Detailed Application Field Plans

ADG728BRUZ-REEL7 finds applications in various fields, including: 1. Audio systems: Signal routing in audio mixers and amplifiers. 2. Test and measurement equipment: Switching between different test signals. 3. Industrial automation: Selecting input signals for control systems. 4. Communication systems: Routing analog signals in telecommunication devices. 5. Medical equipment: Channel selection in medical imaging devices.

Detailed and Complete Alternative Models

1. ADG708BRUZ-REEL7: Analog multiplexer with 8 channels, similar specifications to ADG728BRUZ-REEL7.
2. ADG729BRUZ-REEL7: Analog multiplexer with 16 channels, suitable for applications requiring higher channel count.
3. ADG721BRUZ-REEL7: Analog multiplexer with 4 channels, suitable for applications with lower channel requirements.

(Note: These alternative models are provided as examples and may not cover all available options.)

In conclusion, ADG728BRUZ-REEL7 is a versatile analog multiplexer with 8 channels, offering low on-resistance, wide supply voltage range, low power consumption