QD Devices Inc.
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
ADG787BCB-REEL7

ADG787BCB-REEL7

Product Overview

Category

ADG787BCB-REEL7 belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for signal switching and routing applications.

Characteristics

  • High precision and reliability
  • Low power consumption
  • Compact size
  • Wide operating voltage range

Package

ADG787BCB-REEL7 is available in a small outline package (SOIC) with 8 pins.

Essence

The essence of this product lies in its ability to efficiently control and switch signals within electronic circuits.

Packaging/Quantity

ADG787BCB-REEL7 is typically packaged in reels containing a quantity of 250 units.

Specifications

  • Supply Voltage: 2.7V to 5.5V
  • On-Resistance: 4 Ohms (typical)
  • Off-Leakage Current: 1nA (maximum)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VDD: Power supply input
  2. IN1: Input control signal 1
  3. IN2: Input control signal 2
  4. GND: Ground connection
  5. COM: Common terminal
  6. NO: Normally open terminal
  7. NC: Normally closed terminal
  8. VSS: Negative power supply input

Functional Features

  • Single-pole double-throw (SPDT) switch configuration
  • Fast switching speed
  • Low distortion and crosstalk
  • ESD protection

Advantages

  • High precision signal switching
  • Low power consumption extends battery life
  • Compact size allows for space-saving designs
  • Wide operating voltage range ensures compatibility with various systems

Disadvantages

  • Limited number of channels
  • Relatively higher cost compared to simpler switch solutions

Working Principles

ADG787BCB-REEL7 utilizes MOSFET-based switching technology to control the flow of signals. When an appropriate control signal is applied, the switch changes its state, connecting or disconnecting the input and output terminals.

Detailed Application Field Plans

This product finds applications in various fields, including:

  1. Audio equipment: Signal routing and selection in audio mixers, amplifiers, and receivers.
  2. Communication systems: Switching between different antennas or channels in wireless communication devices.
  3. Test and measurement instruments: Signal multiplexing and switching in oscilloscopes, data loggers, and function generators.
  4. Industrial automation: Control signal routing in PLCs (Programmable Logic Controllers) and industrial control systems.

Detailed and Complete Alternative Models

  1. ADG786BCB-REEL7: Similar specifications with a different pin configuration.
  2. ADG788BCB-REEL7: Higher channel count with additional features.
  3. ADG789BCB-REEL7: Lower power consumption variant with reduced on-resistance.

(Note: The above alternative models are suggestions and may vary based on specific requirements.)

Word Count: 346 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق ADG787BCB-REEL7 في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of ADG787BCB-REEL7 in technical solutions:

  1. Q: What is the ADG787BCB-REEL7? A: The ADG787BCB-REEL7 is a specific model of analog switch IC (integrated circuit) manufactured by Analog Devices.

  2. Q: What is the purpose of the ADG787BCB-REEL7? A: The ADG787BCB-REEL7 is designed to act as a high-performance analog switch, allowing for the routing of analog signals in various technical applications.

  3. Q: What are some typical applications of the ADG787BCB-REEL7? A: Some common applications include audio and video signal routing, test and measurement equipment, data acquisition systems, and communication devices.

  4. Q: What is the voltage range supported by the ADG787BCB-REEL7? A: The ADG787BCB-REEL7 supports a wide voltage range, typically from -5V to +5V.

  5. Q: How many channels does the ADG787BCB-REEL7 have? A: The ADG787BCB-REEL7 has a total of four independent channels.

  6. Q: What is the maximum current handling capability of the ADG787BCB-REEL7? A: The ADG787BCB-REEL7 can handle currents up to 200mA per channel.

  7. Q: Does the ADG787BCB-REEL7 require an external power supply? A: Yes, the ADG787BCB-REEL7 requires an external power supply to operate properly.

  8. Q: Can the ADG787BCB-REEL7 be controlled digitally? A: Yes, the ADG787BCB-REEL7 can be controlled using digital logic signals, making it easy to integrate into digital systems.

  9. Q: What is the typical on-resistance of the ADG787BCB-REEL7? A: The typical on-resistance of the ADG787BCB-REEL7 is around 10 ohms.

  10. Q: Is the ADG787BCB-REEL7 available in a surface-mount package? A: Yes, the ADG787BCB-REEL7 is available in a surface-mount package, specifically the CB (WLCSP) package.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.