QD Devices Inc.
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
ADM706ANZ
عرض التفاصيل جداول البيانات

ADM706ANZ

Product Overview

Category

ADM706ANZ belongs to the category of integrated circuits (ICs).

Use

This product is commonly used as a voltage supervisor or reset circuit.

Characteristics

  • Monitors power supply voltages to ensure proper system operation.
  • Generates a reset signal when the monitored voltage falls below a specified threshold.
  • Provides a stable and reliable reset output.
  • Offers low power consumption and high accuracy.

Package

ADM706ANZ is available in a 16-pin PDIP (Plastic Dual In-line Package) format.

Essence

The essence of ADM706ANZ lies in its ability to monitor and control power supply voltages, ensuring the stability and reliability of electronic systems.

Packaging/Quantity

ADM706ANZ is typically sold in reels containing 250 units per reel.

Specifications

  • Supply Voltage Range: 2.7V to 5.5V
  • Reset Threshold Voltage: 4.63V
  • Reset Timeout Period: 140ms
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VCC: Power supply input
  2. GND: Ground reference
  3. RESET: Active-low reset output
  4. MR: Manual reset input
  5. VBAT: Backup battery input
  6. GND: Ground reference
  7. RESET: Active-low reset output
  8. RESET: Active-low reset output
  9. RESET: Active-low reset output
  10. RESET: Active-low reset output
  11. RESET: Active-low reset output
  12. RESET: Active-low reset output
  13. RESET: Active-low reset output
  14. RESET: Active-low reset output
  15. RESET: Active-low reset output
  16. RESET: Active-low reset output

Functional Features

  • Monitors power supply voltage continuously.
  • Generates a reset signal when the voltage falls below the threshold.
  • Provides a stable reset output until the voltage rises above the threshold.
  • Supports manual reset functionality.
  • Includes a backup battery input for power loss detection.

Advantages and Disadvantages

Advantages

  • High accuracy in monitoring power supply voltages.
  • Low power consumption.
  • Reliable reset output.
  • Manual reset capability.
  • Backup battery input for power loss detection.

Disadvantages

  • Limited to a specific voltage range (2.7V to 5.5V).
  • Fixed reset threshold voltage (4.63V).

Working Principles

ADM706ANZ operates by continuously monitoring the power supply voltage. When the voltage drops below the specified threshold, it generates an active-low reset signal. This signal remains active until the voltage rises above the threshold again. The IC also allows for manual reset through the MR pin and includes a backup battery input for detecting power loss situations.

Detailed Application Field Plans

ADM706ANZ finds applications in various electronic systems where voltage monitoring and reliable reset functionality are crucial. Some potential application fields include:

  1. Microcontrollers and microprocessors
  2. Embedded systems
  3. Industrial automation
  4. Power management circuits
  5. Communication equipment
  6. Automotive electronics
  7. Medical devices

Detailed and Complete Alternative Models

  1. ADM708ARZ: Similar voltage supervisor IC with adjustable reset threshold.
  2. ADM705ARZ: Voltage supervisor IC with a lower reset threshold voltage.
  3. ADM704ARZ: Voltage supervisor IC with a higher reset threshold voltage.
  4. ADM709RARZ: Voltage supervisor IC with additional watchdog timer functionality.

These alternative models offer similar features and can be considered as substitutes for ADM706ANZ based on specific requirements.

Word count: 530 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق ADM706ANZ في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of ADM706ANZ in technical solutions:

  1. Q: What is ADM706ANZ? A: ADM706ANZ is a voltage supervisor and reset generator IC (integrated circuit) commonly used in electronic systems.

  2. Q: What is the purpose of ADM706ANZ? A: The purpose of ADM706ANZ is to monitor the power supply voltage and generate a reset signal when the voltage falls below a certain threshold.

  3. Q: How does ADM706ANZ work? A: ADM706ANZ continuously monitors the power supply voltage using an internal voltage reference. When the voltage drops below a specified level, it asserts the reset output pin.

  4. Q: What is the voltage range supported by ADM706ANZ? A: ADM706ANZ supports a wide voltage range typically from 1.8V to 5V, making it compatible with various power supply configurations.

  5. Q: Can ADM706ANZ be used in battery-powered applications? A: Yes, ADM706ANZ can be used in battery-powered applications as it has low quiescent current consumption, making it suitable for power-sensitive designs.

  6. Q: Does ADM706ANZ have adjustable reset thresholds? A: No, ADM706ANZ has fixed reset thresholds that are set during manufacturing. However, there are other variants available with adjustable thresholds.

  7. Q: Can ADM706ANZ generate both active-high and active-low reset signals? A: Yes, ADM706ANZ offers options for generating either active-high or active-low reset signals, depending on the specific variant chosen.

  8. Q: Is ADM706ANZ capable of providing a manual reset input? A: Yes, ADM706ANZ includes a manual reset input pin that allows an external signal to force a system reset.

  9. Q: What is the typical response time of ADM706ANZ? A: The typical response time of ADM706ANZ is in the range of microseconds, ensuring quick detection and response to voltage fluctuations.

  10. Q: Can ADM706ANZ be used in safety-critical applications? A: Yes, ADM706ANZ is designed with built-in fault detection features and is suitable for use in safety-critical applications where reliable reset generation is crucial.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.