QD Devices Inc.
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
ADR4533ARZ-R7
عرض التفاصيل جداول البيانات

ADR4533ARZ-R7

Product Overview

Category

The ADR4533ARZ-R7 belongs to the category of voltage references.

Use

It is primarily used as a precision voltage reference in various electronic applications.

Characteristics

  • High accuracy and stability
  • Low temperature coefficient
  • Low output noise
  • Wide operating temperature range
  • Low power consumption

Package

The ADR4533ARZ-R7 comes in a small outline package (SOIC) with eight pins.

Essence

This voltage reference provides a stable and accurate voltage output, which is crucial for ensuring precise operation of electronic circuits.

Packaging/Quantity

The ADR4533ARZ-R7 is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Output Voltage: 2.5V
  • Initial Accuracy: ±0.05%
  • Temperature Coefficient: 10ppm/°C
  • Supply Voltage Range: 4.5V to 18V
  • Output Current: 10mA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

  1. VOUT: Output Voltage
  2. GND: Ground
  3. NC: No Connection
  4. NC: No Connection
  5. TRIM: Trim Terminal
  6. NC: No Connection
  7. VIN: Input Voltage
  8. NC: No Connection

Functional Features

  • High precision voltage reference
  • Low output noise for improved signal integrity
  • Wide operating temperature range allows for use in various environments
  • Low power consumption for energy-efficient designs
  • Trim terminal for fine-tuning the output voltage if required

Advantages

  • Excellent accuracy and stability ensure reliable performance
  • Low temperature coefficient minimizes voltage drift over temperature variations
  • Low output noise preserves signal integrity in sensitive applications
  • Wide operating temperature range enables use in extreme conditions
  • Low power consumption extends battery life in portable devices

Disadvantages

  • Limited output current may not be suitable for high-power applications
  • Trim terminal adjustment requires additional circuitry and calibration

Working Principles

The ADR4533ARZ-R7 utilizes a bandgap voltage reference circuit to generate a stable and accurate output voltage. It compensates for temperature variations by employing a combination of bipolar and CMOS technologies, resulting in a low temperature coefficient.

Detailed Application Field Plans

The ADR4533ARZ-R7 is widely used in various applications that require precise voltage references, such as:

  1. Analog-to-Digital Converters (ADCs)
  2. Digital-to-Analog Converters (DACs)
  3. Voltage regulators
  4. Precision measurement instruments
  5. Data acquisition systems
  6. Industrial control systems
  7. Medical equipment
  8. Automotive electronics

Detailed and Complete Alternative Models

  1. ADR4525ARZ-R7: 2.5V voltage reference with higher initial accuracy
  2. ADR4540ARZ-R7: 4.096V voltage reference with similar characteristics
  3. ADR4550ARZ-R7: 5.0V voltage reference with wider supply voltage range

These alternative models offer different output voltages and specifications to cater to specific application requirements.

Word count: 442 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق ADR4533ARZ-R7 في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of ADR4533ARZ-R7 in technical solutions:

  1. Q: What is ADR4533ARZ-R7? A: ADR4533ARZ-R7 is a precision voltage reference IC that provides a stable and accurate voltage output.

  2. Q: What is the voltage output range of ADR4533ARZ-R7? A: The voltage output range of ADR4533ARZ-R7 is typically between 4.5V and 5.5V.

  3. Q: What is the accuracy of ADR4533ARZ-R7? A: ADR4533ARZ-R7 has an initial accuracy of ±0.05% and a temperature coefficient of ±5 ppm/°C.

  4. Q: Can ADR4533ARZ-R7 be used in high-precision measurement applications? A: Yes, ADR4533ARZ-R7 is suitable for high-precision measurement applications due to its low noise and excellent stability.

  5. Q: How much current does ADR4533ARZ-R7 consume? A: ADR4533ARZ-R7 has a low quiescent current consumption of typically 1.5 mA.

  6. Q: Is ADR4533ARZ-R7 suitable for battery-powered devices? A: Yes, ADR4533ARZ-R7 can be used in battery-powered devices as it consumes low power and has a wide operating voltage range.

  7. Q: Can ADR4533ARZ-R7 operate in harsh environments? A: ADR4533ARZ-R7 has a wide temperature range of -40°C to +125°C, making it suitable for operation in harsh environments.

  8. Q: What is the package type of ADR4533ARZ-R7? A: ADR4533ARZ-R7 is available in a small SOT-23 package, which is compact and easy to integrate into various designs.

  9. Q: Does ADR4533ARZ-R7 require external components for operation? A: Yes, ADR4533ARZ-R7 requires a few external passive components, such as capacitors, for proper operation.

  10. Q: Can ADR4533ARZ-R7 be used as a voltage reference for analog-to-digital converters (ADCs)? A: Yes, ADR4533ARZ-R7 is commonly used as a voltage reference for ADCs due to its high accuracy and stability.

Please note that these answers are general and may vary depending on specific application requirements.