قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
MF-R800-2-99

MF-R800-2-99

Product Overview

Category

The MF-R800-2-99 belongs to the category of resettable fuses or PTC (Positive Temperature Coefficient) thermistors.

Use

It is used as a protection device in electronic circuits to limit overcurrent and prevent damage to sensitive components.

Characteristics

  • Resettable fuse
  • High current handling capability
  • Fast response time
  • Compact package
  • Self-recoverable

Package

The MF-R800-2-99 is typically available in a surface mount package.

Essence

The essence of the MF-R800-2-99 lies in its ability to provide reliable overcurrent protection without the need for replacement after a fault condition.

Packaging/Quantity

It is commonly packaged in reels with a quantity varying based on manufacturer specifications.

Specifications

  • Hold Current: 800mA
  • Trip Current: 1.6A
  • Max Voltage: 60V
  • Operating Temperature Range: -40°C to 85°C
  • Resistance: <0.5Ω

Detailed Pin Configuration

The MF-R800-2-99 typically has two pins for surface mount installation, with specific pin configuration based on the manufacturer's datasheet.

Functional Features

  • Overcurrent protection
  • Self-resetting functionality
  • Reliable performance
  • Wide operating temperature range

Advantages

  • Eliminates the need for replacement after a fault
  • Fast response to overcurrent conditions
  • Suitable for a wide range of applications
  • Compact and space-saving design

Disadvantages

  • Limited voltage and current ratings compared to traditional fuses
  • May have higher initial cost compared to conventional fuses

Working Principles

The MF-R800-2-99 operates based on the PTC effect, where its resistance increases significantly when subjected to an overcurrent condition, limiting the current flow through the circuit. Once the fault is removed, the device self-resets, allowing normal operation to resume.

Detailed Application Field Plans

The MF-R800-2-99 is commonly used in various electronic circuits such as power supplies, battery packs, and automotive electronics to provide overcurrent protection without the need for manual intervention.

Detailed and Complete Alternative Models

  • MF-R500-2-99
  • MF-R1100-2-99
  • MF-R1600-2-99

This list is not exhaustive and may vary based on manufacturers and specifications.


This content provides a comprehensive overview of the MF-R800-2-99, covering its category, use, characteristics, specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق MF-R800-2-99 في الحلول التقنية

  1. What is MF-R800-2-99?

    • MF-R800-2-99 is a type of resettable fuse, commonly used in electronic circuits to protect against overcurrent and short circuit conditions.
  2. What are the key specifications of MF-R800-2-99?

    • The MF-R800-2-99 has a hold current of 8A, a trip current of 16A, and a maximum voltage rating of 30V.
  3. How does MF-R800-2-99 work in technical solutions?

    • When the current flowing through the circuit exceeds the hold current, the MF-R800-2-99 heats up and increases its resistance, limiting the current flow and protecting the circuit.
  4. Where can MF-R800-2-99 be used in technical solutions?

    • MF-R800-2-99 can be used in various applications such as power supplies, battery packs, automotive electronics, and industrial control systems.
  5. What are the advantages of using MF-R800-2-99 in technical solutions?

    • MF-R800-2-99 provides overcurrent protection without the need for replacement after a fault, reducing downtime and maintenance costs.
  6. Are there any limitations to using MF-R800-2-99 in technical solutions?

    • While MF-R800-2-99 offers resettable protection, it's important to ensure that it is properly sized for the application to avoid nuisance tripping.
  7. How do I select the appropriate MF-R800-2-99 for my technical solution?

    • Consider the operating voltage, maximum current requirements, ambient temperature, and the expected fault conditions when selecting the MF-R800-2-99 for your application.
  8. Can MF-R800-2-99 be used in high-power applications?

    • MF-R800-2-99 is suitable for moderate power applications, but for high-power scenarios, it's essential to consult the manufacturer's guidelines and consider alternative protection methods.
  9. What are the typical failure modes of MF-R800-2-99 in technical solutions?

    • Common failure modes include prolonged exposure to overcurrent conditions, mechanical damage, or exposure to environmental factors beyond its specified limits.
  10. Are there any industry standards or certifications related to the use of MF-R800-2-99 in technical solutions?

    • MF-R800-2-99 may comply with standards such as UL, TUV, or RoHS, depending on the specific requirements of the application and market regulations. Always verify the relevant certifications before implementation.