TISP5150H3BJR
Product Overview
Category
The TISP5150H3BJR belongs to the category of transient voltage suppressor (TVS) diodes.
Use
It is used to protect sensitive electronic equipment from voltage transients induced by lightning, inductive load switching, and electrostatic discharge (ESD).
Characteristics
- High surge capability
- Low clamping voltage
- Fast response time
- RoHS compliant
Package
The TISP5150H3BJR is available in a surface mount package.
Essence
The essence of the TISP5150H3BJR lies in its ability to divert excessive current away from sensitive components, thereby safeguarding them from damage due to voltage spikes.
Packaging/Quantity
The TISP5150H3BJR is typically packaged in reels and is available in varying quantities depending on the manufacturer's specifications.
Specifications
- Standoff Voltage: 5V
- Breakdown Voltage: 6.4V
- Peak Pulse Current: 100A
- Operating Temperature Range: -55°C to 150°C
- Reverse Standoff Voltage: 4.25V
Detailed Pin Configuration
The TISP5150H3BJR has a standard SOT-23-6 pin configuration: 1. GND 2. NC 3. Anode 4. Cathode 5. NC 6. NC
Functional Features
- Bi-directional TVS diode
- Low leakage current
- ESD protection
Advantages and Disadvantages
Advantages
- High surge capability
- Fast response time
- RoHS compliant
Disadvantages
- Limited to low voltage applications
- May require additional circuitry for higher voltage protection
Working Principles
The TISP5150H3BJR operates based on the principle of avalanche breakdown, where it rapidly diverts excess current away from the protected circuit when a voltage transient occurs.
Detailed Application Field Plans
The TISP5150H3BJR is commonly used in the following applications: - Telecommunication equipment - Data lines - Industrial control systems - Consumer electronics
Detailed and Complete Alternative Models
Some alternative models to the TISP5150H3BJR include: - TISP61089BDR - TPD2E007 - P6KE6.8CA
In conclusion, the TISP5150H3BJR is a vital component in protecting electronic devices from voltage transients, offering high surge capability and fast response time. While it has limitations in higher voltage applications, its effectiveness in safeguarding sensitive equipment makes it an essential component in various industries.
[Word Count: 386]
قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق TISP5150H3BJR في الحلول التقنية
What is the TISP5150H3BJR?
- The TISP5150H3BJR is a high-performance, bidirectional, solid-state surge protector designed to protect sensitive electronics from voltage transients induced by lightning and other transient voltage events.
What is the maximum operating voltage of the TISP5150H3BJR?
- The maximum operating voltage of the TISP5150H3BJR is 150V.
What is the typical clamping voltage of the TISP5150H3BJR?
- The typical clamping voltage of the TISP5150H3BJR is 243V at 1A.
What are the typical applications for the TISP5150H3BJR?
- The TISP5150H3BJR is commonly used in telecommunication equipment, network interface cards, industrial control systems, and other applications requiring protection from transient voltage events.
What is the response time of the TISP5150H3BJR?
- The response time of the TISP5150H3BJR is typically less than 1 nanosecond.
Is the TISP5150H3BJR RoHS compliant?
- Yes, the TISP5150H3BJR is RoHS compliant, making it suitable for use in environmentally sensitive applications.
What is the recommended operating temperature range for the TISP5150H3BJR?
- The recommended operating temperature range for the TISP5150H3BJR is -40°C to 125°C.
Does the TISP5150H3BJR require external components for operation?
- No, the TISP5150H3BJR is a standalone surge protector and does not require external components for operation.
Can the TISP5150H3BJR be used in outdoor applications?
- Yes, the TISP5150H3BJR is suitable for outdoor applications and can withstand harsh environmental conditions.
What is the package type of the TISP5150H3BJR?
- The TISP5150H3BJR is available in a surface-mount DFN-10 package, making it suitable for compact and space-constrained designs.