AP1084D25L-13
Product Overview
Category
The AP1084D25L-13 belongs to the category of voltage regulators.
Use
It is used to regulate voltage in electronic circuits and power supply systems.
Characteristics
- Input Voltage: 4.5V to 25V
- Output Voltage: 2.5V
- Maximum Output Current: 5A
- Low Dropout Voltage: 1.5V
- Thermal Shutdown Protection
- Short Circuit Current Limiting
Package
The AP1084D25L-13 comes in a TO-252 package.
Essence
This voltage regulator is essential for maintaining stable voltage levels in various electronic applications.
Packaging/Quantity
The AP1084D25L-13 is typically packaged in reels and available in varying quantities based on customer requirements.
Specifications
- Input Voltage Range: 4.5V to 25V
- Output Voltage: 2.5V
- Output Current: Up to 5A
- Dropout Voltage: 1.5V (typical)
- Operating Temperature Range: -40°C to 125°C
- Package Type: TO-252
Detailed Pin Configuration
The AP1084D25L-13 has the following pin configuration: 1. VIN: Input Voltage 2. GND: Ground 3. VOUT: Output Voltage
Functional Features
- Low Dropout Voltage: Ensures efficient regulation even when the input voltage is only slightly higher than the output voltage.
- Thermal Shutdown Protection: Protects the device from overheating, enhancing its reliability.
- Short Circuit Current Limiting: Safeguards the circuit from damage in case of a short circuit.
Advantages and Disadvantages
Advantages
- High maximum output current
- Wide input voltage range
- Thermal shutdown protection for enhanced reliability
Disadvantages
- Relatively high dropout voltage compared to some other models
- Limited output voltage options
Working Principles
The AP1084D25L-13 operates by comparing the output voltage to a reference voltage and adjusting the pass element to maintain a constant output voltage despite changes in the input voltage or load.
Detailed Application Field Plans
The AP1084D25L-13 is suitable for various applications including: - Power supply units for consumer electronics - Industrial automation systems - Automotive electronics - Battery charging circuits
Detailed and Complete Alternative Models
Some alternative models to the AP1084D25L-13 include: - LM317 - LM7805 - LM1117
In conclusion, the AP1084D25L-13 is a versatile voltage regulator with a wide input voltage range and high output current capability, making it suitable for a variety of electronic applications.
[Word Count: 394]
قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق AP1084D25L-13 في الحلول التقنية
What is the maximum input voltage for AP1084D25L-13?
- The maximum input voltage for AP1084D25L-13 is 26V.
What is the output voltage of AP1084D25L-13?
- The output voltage of AP1084D25L-13 is 2.5V.
What is the maximum output current of AP1084D25L-13?
- The maximum output current of AP1084D25L-13 is 5A.
What are the typical applications for AP1084D25L-13?
- AP1084D25L-13 is commonly used in applications such as industrial power supplies, consumer electronics, and automotive systems.
Does AP1084D25L-13 require an external heat sink?
- Yes, AP1084D25L-13 requires an external heat sink for proper thermal management.
What is the dropout voltage of AP1084D25L-13?
- The dropout voltage of AP1084D25L-13 is typically 1.3V at 5A.
Is AP1084D25L-13 suitable for battery-powered applications?
- Yes, AP1084D25L-13 is suitable for battery-powered applications due to its low dropout voltage and high efficiency.
What type of package does AP1084D25L-13 come in?
- AP1084D25L-13 is available in a TO-252-2 (DPAK) package.
What is the operating temperature range of AP1084D25L-13?
- The operating temperature range of AP1084D25L-13 is -40°C to 125°C.
Is AP1084D25L-13 RoHS compliant?
- Yes, AP1084D25L-13 is RoHS compliant, making it suitable for environmentally conscious designs.