AZ23C10-7
Product Overview
Category: Diode
Use: Rectification, voltage regulation
Characteristics: Small signal, high-speed switching
Package: SOT-23
Essence: Silicon diode
Packaging/Quantity: Tape & Reel, 3000 units
Specifications
- Part Number: AZ23C10-7
- Type: Zener diode
- Voltage - Zener (Nom): 10V
- Power Dissipation (Max): 250mW
- Impedance (Max) (Zzt): 20 Ohm
- Current - Reverse Leakage @ Vr: 100nA @ 7V
- Operating Temperature: -65°C ~ 150°C
Detailed Pin Configuration
The AZ23C10-7 is a three-pin device with the following pin configuration: 1. Anode (A) 2. Cathode (K) 3. No Connection (NC)
Functional Features
- Precise voltage regulation
- High reliability and stability
- Fast response time
Advantages and Disadvantages
Advantages: - Small form factor - Low reverse leakage current - Wide operating temperature range
Disadvantages: - Limited power dissipation capability - Sensitivity to overvoltage conditions
Working Principles
The AZ23C10-7 operates based on the principle of the Zener effect, where it maintains a constant voltage across its terminals when operated in the reverse breakdown region.
Detailed Application Field Plans
The AZ23C10-7 is commonly used in various applications such as: - Voltage regulation in power supplies - Signal clamping and protection circuits - Precision voltage references
Detailed and Complete Alternative Models
Some alternative models to the AZ23C10-7 include: - BZX84C10 - 1N4740A - MMBZ5242B
This completes the entry for AZ23C10-7, providing comprehensive information about its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق AZ23C10-7 في الحلول التقنية
What is AZ23C10-7?
- AZ23C10-7 is a dual surface mount Zener diode with a voltage range of 9.1V to 10.5V.
What are the typical applications of AZ23C10-7?
- AZ23C10-7 is commonly used for voltage regulation, surge suppression, and transient voltage protection in various electronic circuits.
What is the maximum power dissipation of AZ23C10-7?
- The maximum power dissipation of AZ23C10-7 is 200mW.
What is the operating temperature range of AZ23C10-7?
- AZ23C10-7 can operate within a temperature range of -65°C to +150°C.
What is the forward voltage drop of AZ23C10-7?
- The forward voltage drop of AZ23C10-7 is typically around 0.9V at a forward current of 10mA.
Can AZ23C10-7 be used for overvoltage protection?
- Yes, AZ23C10-7 can be used to protect sensitive components from overvoltage conditions by shunting excess voltage to ground.
Is AZ23C10-7 suitable for low-power applications?
- Yes, AZ23C10-7's low power dissipation makes it suitable for low-power applications where precise voltage regulation is required.
What is the reverse leakage current of AZ23C10-7?
- The reverse leakage current of AZ23C10-7 is typically very low, ensuring minimal impact on the overall circuit performance.
Can AZ23C10-7 be used in automotive electronics?
- Yes, AZ23C10-7 is often used in automotive electronics for voltage clamping and transient protection.
Are there any specific layout considerations when using AZ23C10-7 in a PCB design?
- It is important to place AZ23C10-7 close to the protected circuitry and ensure proper thermal management to maintain its reliability and performance.