Diodes Incorporated
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
MBR20100CTF-G1
عرض التفاصيل جداول البيانات

MBR20100CTF-G1

Introduction

The MBR20100CTF-G1 is a Schottky barrier rectifier designed for high-frequency switching power supply applications. This entry provides an overview of the product, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Semiconductor/Electronic Component
  • Use: High-frequency switching power supply applications
  • Characteristics: Schottky barrier rectifier, high efficiency, low power loss
  • Package: TO-220AB
  • Essence: Efficient rectification in high-frequency applications
  • Packaging/Quantity: Tape & Reel, 800 units per reel

Specifications

  • Voltage - DC Reverse (Vr) (Max): 100V
  • Current - Average Rectified (Io): 20A
  • Voltage - Forward (Vf) (Max) @ If: 650mV @ 10A
  • Speed: Fast recovery time

Detailed Pin Configuration

The MBR20100CTF-G1 has a standard TO-220AB package with three pins: 1. Anode 2. Cathode 3. Not connected (Tab)

Functional Features

  • High efficiency due to Schottky barrier technology
  • Fast switching capability
  • Low power loss

Advantages and Disadvantages

Advantages: - High efficiency - Fast recovery time - Low power loss

Disadvantages: - Higher cost compared to standard diodes - Limited reverse voltage rating

Working Principles

The MBR20100CTF-G1 operates based on the Schottky barrier principle, which allows for faster switching and lower forward voltage drop compared to conventional PN-junction diodes. When forward biased, the Schottky barrier reduces the charge storage and recovery time, making it suitable for high-frequency applications.

Detailed Application Field Plans

The MBR20100CTF-G1 is commonly used in the following applications: - Switching power supplies - DC-DC converters - Inverters

Detailed and Complete Alternative Models

Some alternative models to the MBR20100CTF-G1 include: - MBR2045CTG - MBR20200CTG - MBR2060CTG

In conclusion, the MBR20100CTF-G1 is a high-performance Schottky barrier rectifier suitable for high-frequency switching power supply applications, offering high efficiency and fast switching capabilities.

[Word Count: 344]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق MBR20100CTF-G1 في الحلول التقنية

  1. What is MBR20100CTF-G1?

    • MBR20100CTF-G1 is a Schottky barrier rectifier diode designed for high efficiency and low power loss in applications such as power supplies, converters, and freewheeling diodes.

  2. What is the maximum forward voltage of MBR20100CTF-G1?

    • The maximum forward voltage of MBR20100CTF-G1 is typically 0.55V at 10A.

  3. What is the reverse voltage rating of MBR20100CTF-G1?

    • MBR20100CTF-G1 has a reverse voltage rating of 100V.

  4. What is the typical junction capacitance of MBR20100CTF-G1?

    • The typical junction capacitance of MBR20100CTF-G1 is 300pF at 4V, 1MHz.

  5. What are the typical applications for MBR20100CTF-G1?

    • Typical applications for MBR20100CTF-G1 include switch mode power supplies, freewheeling diodes, OR-ing diodes, and reverse battery protection.

  6. What is the operating temperature range of MBR20100CTF-G1?

    • The operating temperature range of MBR20100CTF-G1 is -65°C to +175°C.

  7. What is the forward surge current capability of MBR20100CTF-G1?

    • MBR20100CTF-G1 has a forward surge current capability of 150A.

  8. Does MBR20100CTF-G1 have a low leakage current?

    • Yes, MBR20100CTF-G1 has a low leakage current, making it suitable for high-efficiency applications.

  9. Is MBR20100CTF-G1 RoHS compliant?

    • Yes, MBR20100CTF-G1 is RoHS compliant, meeting environmental standards.

  10. Can MBR20100CTF-G1 be used in automotive applications?

    • Yes, MBR20100CTF-G1 is suitable for automotive applications due to its high reliability and performance characteristics.