قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
PI2PCIE212ZHEX

PI2PCIE212ZHEX

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: PCIe to PCI Bridge
  • Characteristics:
    • Converts Peripheral Component Interconnect Express (PCIe) signals to Peripheral Component Interconnect (PCI) signals.
    • Allows connection of legacy PCI devices to modern PCIe systems.
    • Supports high-speed data transfer rates.
  • Package: 48-pin QFN (Quad Flat No-Lead) package.
  • Essence: Bridge IC for interfacing PCIe and PCI buses.
  • Packaging/Quantity: Available in tape and reel packaging, quantity per reel varies.

Specifications

  • Operating Voltage: 3.3V
  • Operating Temperature: -40°C to +85°C
  • Data Transfer Rate: Up to 5 Gbps
  • Supported PCIe Versions: PCIe Gen1, Gen2, and Gen3
  • Supported PCI Versions: PCI 2.3
  • Power Consumption: Low power consumption design

Detailed Pin Configuration

The PI2PCIE212ZHEX has a total of 48 pins. The pin configuration is as follows:

  1. VDD33
  2. REFCLKP
  3. REFCLKN
  4. PERST#
  5. WAKE#
  6. CLKREQ#
  7. CLKREQ#_PCI
  8. CLKREQ#_PCIe
  9. CLKREQ#_PCIe
  10. CLKREQ#_PCIe
  11. CLKREQ#_PCIe
  12. CLKREQ#_PCIe
  13. CLKREQ#_PCIe
  14. CLKREQ#_PCIe
  15. CLKREQ#_PCIe
  16. CLKREQ#_PCIe
  17. CLKREQ#_PCIe
  18. CLKREQ#_PCIe
  19. CLKREQ#_PCIe
  20. CLKREQ#_PCIe
  21. CLKREQ#_PCIe
  22. CLKREQ#_PCIe
  23. CLKREQ#_PCIe
  24. CLKREQ#_PCIe
  25. CLKREQ#_PCIe
  26. CLKREQ#_PCIe
  27. CLKREQ#_PCIe
  28. CLKREQ#_PCIe
  29. CLKREQ#_PCIe
  30. CLKREQ#_PCIe
  31. CLKREQ#_PCIe
  32. CLKREQ#_PCIe
  33. CLKREQ#_PCIe
  34. CLKREQ#_PCIe
  35. CLKREQ#_PCIe
  36. CLKREQ#_PCIe
  37. CLKREQ#_PCIe
  38. CLKREQ#_PCIe
  39. CLKREQ#_PCIe
  40. CLKREQ#_PCIe
  41. CLKREQ#_PCIe
  42. CLKREQ#_PCIe
  43. CLKREQ#_PCIe
  44. CLKREQ#_PCIe
  45. CLKREQ#_PCIe
  46. CLKREQ#_PCIe
  47. CLKREQ#_PCIe
  48. GND

Functional Features

  • Converts PCIe signals to PCI signals, enabling compatibility between modern PCIe systems and legacy PCI devices.
  • Supports hot-plug and hot-swap functionality.
  • Provides automatic configuration of PCI devices.
  • Supports advanced power management features.
  • Offers low latency and high throughput data transfer.

Advantages and Disadvantages

Advantages: - Enables seamless integration of legacy PCI devices into modern PCIe systems. - Supports high-speed data transfer rates. - Low power consumption design. - Hot-plug and hot-swap functionality. - Automatic configuration of PCI devices.

Disadvantages: - Limited to PCIe Gen1, Gen2, and Gen3 compatibility. - Supports only PCI 2.3 version.

Working Principles

The PI2PCIE212ZHEX acts as a bridge between the PCIe and PCI buses. It converts the high-speed PCIe signals into compatible PCI signals, allowing legacy PCI devices to be connected to modern PCIe systems. The bridge IC handles the necessary protocol conversion and provides seamless communication between the two bus architectures.

Detailed Application Field Plans

The PI2PCIE212ZHEX finds applications in various fields where there is a need to connect legacy PCI devices to modern PCIe systems. Some of the common application areas include:

  1. Industrial Automation: Integration of older PCI-based industrial control cards with newer PCIe-based industrial computers.
  2. Medical Equipment: Connecting legacy PCI medical devices to modern PCIe-based medical workstations.
  3. Gaming Systems: Enabling compatibility between older PCI gaming peripherals and modern PCIe gaming platforms.
  4. Data Acquisition: Integrating legacy PCI data acquisition cards with modern PCIe-based data acquisition systems.
  5. Embedded Systems: Bridging the gap between legacy PCI modules and modern PCIe-based embedded

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق PI2PCIE212ZHEX في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of PI2PCIE212ZHEX in technical solutions:

  1. Q: What is PI2PCIE212ZHEX? A: PI2PCIE212ZHEX is a PCIe-to-PCI bridge chip designed for connecting PCI devices to a computer system via a PCIe interface.

  2. Q: What are the key features of PI2PCIE212ZHEX? A: Some key features of PI2PCIE212ZHEX include support for PCIe Gen2 x1, compatibility with various operating systems, low power consumption, and hot-plug support.

  3. Q: How can I use PI2PCIE212ZHEX in my technical solution? A: You can integrate PI2PCIE212ZHEX into your design by connecting it to a PCIe slot on your motherboard and using its PCI interface to connect PCI devices.

  4. Q: Can PI2PCIE212ZHEX be used in both desktop and embedded systems? A: Yes, PI2PCIE212ZHEX is suitable for use in both desktop and embedded systems, providing flexibility in various applications.

  5. Q: Does PI2PCIE212ZHEX require any additional drivers or software? A: Yes, you will need to install the appropriate drivers and software provided by the manufacturer to ensure proper functionality of PI2PCIE212ZHEX.

  6. Q: What is the maximum data transfer rate supported by PI2PCIE212ZHEX? A: PI2PCIE212ZHEX supports a maximum data transfer rate of up to 5 Gbps, which is the standard for PCIe Gen2 x1.

  7. Q: Can PI2PCIE212ZHEX be used for connecting multiple PCI devices simultaneously? A: Yes, PI2PCIE212ZHEX supports multiple PCI devices through its PCI interface, allowing you to connect and use multiple devices at the same time.

  8. Q: Is PI2PCIE212ZHEX compatible with older versions of PCIe? A: Yes, PI2PCIE212ZHEX is backward compatible with PCIe Gen1 x1, ensuring compatibility with older systems that may not support the latest PCIe standards.

  9. Q: Can PI2PCIE212ZHEX be used for hot-plugging PCI devices? A: Yes, PI2PCIE212ZHEX supports hot-plug functionality, allowing you to connect or disconnect PCI devices while the system is powered on.

  10. Q: Where can I find more information about PI2PCIE212ZHEX and its application in technical solutions? A: You can refer to the datasheet and documentation provided by the manufacturer of PI2PCIE212ZHEX for detailed information on its features, specifications, and application guidelines.