Diodes Incorporated
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
PI3HDMI511ZLE+DA
عرض التفاصيل جداول البيانات

PI3HDMI511ZLE+DA

Product Overview

  • Category: HDMI Switch
  • Use: This product is used to switch between multiple HDMI input sources and output them to a single HDMI display.
  • Characteristics: The PI3HDMI511ZLE+DA offers high-speed switching capabilities, support for various video resolutions, and advanced features such as HDCP encryption.
  • Package: The product comes in a compact package with dimensions of 5mm x 5mm.
  • Essence: The essence of the PI3HDMI511ZLE+DA lies in its ability to seamlessly switch between HDMI input sources, providing a convenient solution for multimedia setups.
  • Packaging/Quantity: The product is typically sold in reels containing a specified quantity of units.

Specifications

  • Input Ports: 5 HDMI inputs
  • Output Port: 1 HDMI output
  • Video Resolutions Supported: Up to 4K Ultra HD (3840x2160) at 60Hz
  • Audio Formats Supported: Dolby TrueHD, DTS-HD Master Audio, LPCM, etc.
  • HDCP Support: HDCP 2.2 compliant
  • Power Supply: 3.3V
  • Operating Temperature: -40°C to +85°C

Detailed Pin Configuration

The PI3HDMI511ZLE+DA has the following pin configuration:

  1. VCC
  2. GND
  3. HPD_IN
  4. TMDS_DATA2-
  5. TMDS_DATA2+
  6. TMDS_DATA1-
  7. TMDS_DATA1+
  8. TMDS_DATA0-
  9. TMDS_DATA0+
  10. TMDS_CLK-
  11. TMDS_CLK+
  12. CEC
  13. SCL
  14. SDA

Functional Features

  • High-Speed Switching: The PI3HDMI511ZLE+DA can quickly switch between HDMI input sources without any noticeable delay.
  • Support for Various Resolutions: It supports a wide range of video resolutions, including standard HD, Full HD, and 4K Ultra HD.
  • HDCP Encryption: This product is HDCP 2.2 compliant, ensuring secure transmission of protected content.
  • CEC Support: Consumer Electronics Control (CEC) allows for control of multiple devices through a single remote control.

Advantages and Disadvantages

Advantages: - Seamless switching between HDMI input sources - Support for high-resolution video and audio formats - Compact package size - HDCP encryption for secure content transmission

Disadvantages: - Limited number of HDMI inputs (5 inputs)

Working Principles

The PI3HDMI511ZLE+DA operates by receiving HDMI signals from multiple input sources and selectively routing them to the HDMI output port. It utilizes advanced switching technology to ensure smooth and uninterrupted signal transmission.

Detailed Application Field Plans

The PI3HDMI511ZLE+DA finds applications in various multimedia setups, including:

  1. Home Theater Systems: Allows users to connect multiple HDMI devices, such as Blu-ray players, gaming consoles, and set-top boxes, to a single display.
  2. Conference Rooms: Enables seamless switching between different presentation sources, such as laptops or projectors.
  3. Digital Signage: Provides a convenient solution for displaying content from multiple sources on a single screen.

Detailed and Complete Alternative Models

  1. PI3HDMI511ZHE+DA: Similar to the PI3HDMI511ZLE+DA, but with additional support for HDMI 2.0 features.
  2. PI3HDMI511ZRE+DA: A variant with extended temperature range (-40°C to +105°C) for industrial applications.
  3. PI3HDMI511ZTE+DA: Offers enhanced ESD protection for increased reliability in demanding environments.

These alternative models provide similar functionality to the PI3HDMI511ZLE+DA but cater to specific requirements or preferences.

Word count: 518 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق PI3HDMI511ZLE+DA في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of PI3HDMI511ZLE+DA in technical solutions:

  1. Q: What is the PI3HDMI511ZLE+DA? A: The PI3HDMI511ZLE+DA is a high-speed HDMI switch with integrated equalization and pre-emphasis, designed for use in various technical solutions.

  2. Q: What are the key features of the PI3HDMI511ZLE+DA? A: The key features include support for HDMI 2.0b, 4K resolution at 60Hz, HDCP 2.2 content protection, automatic input signal detection, and low power consumption.

  3. Q: How many HDMI inputs does the PI3HDMI511ZLE+DA support? A: The PI3HDMI511ZLE+DA supports up to five HDMI inputs, allowing you to connect multiple video sources to a single display or device.

  4. Q: Can the PI3HDMI511ZLE+DA be used in both consumer and industrial applications? A: Yes, the PI3HDMI511ZLE+DA is suitable for both consumer electronics and industrial applications, providing reliable HDMI switching capabilities.

  5. Q: Does the PI3HDMI511ZLE+DA require external power? A: Yes, the PI3HDMI511ZLE+DA requires an external power supply to operate properly. It typically operates at a voltage range of 3.3V to 5V.

  6. Q: Is the PI3HDMI511ZLE+DA compatible with older HDMI versions? A: Yes, the PI3HDMI511ZLE+DA is backward compatible with previous HDMI versions, ensuring compatibility with a wide range of devices.

  7. Q: Can the PI3HDMI511ZLE+DA be controlled remotely? A: Yes, the PI3HDMI511ZLE+DA supports remote control through I2C interface, allowing for easy integration into larger systems.

  8. Q: What is the maximum data rate supported by the PI3HDMI511ZLE+DA? A: The PI3HDMI511ZLE+DA supports a maximum data rate of 6 Gbps per channel, ensuring high-quality video and audio transmission.

  9. Q: Does the PI3HDMI511ZLE+DA support audio extraction or insertion? A: No, the PI3HDMI511ZLE+DA is primarily designed for HDMI switching and does not include audio extraction or insertion capabilities.

  10. Q: Are there any specific design considerations when using the PI3HDMI511ZLE+DA? A: It is recommended to follow the datasheet guidelines provided by the manufacturer for proper PCB layout, signal integrity, and power supply decoupling to ensure optimal performance of the PI3HDMI511ZLE+DA in your technical solution.

Please note that these answers are general and may vary depending on the specific requirements and implementation of the PI3HDMI511ZLE+DA in different technical solutions.