Diodes Incorporated
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
PI3VDP411LSAZBE
عرض التفاصيل جداول البيانات

PI3VDP411LSAZBE

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Video DisplayPort Switch
  • Characteristics: High-speed, low-power consumption
  • Package: 48-pin QFN (Quad Flat No-Lead)
  • Essence: Enables switching between multiple DisplayPort sources to a single DisplayPort sink
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage: 1.8V - 3.3V
  • Operating Temperature Range: -40°C to +85°C
  • Bandwidth: Up to 8.1 Gbps
  • Input/Output Impedance: 100 ohms
  • Control Interface: I2C

Detailed Pin Configuration

  1. VDD: Power supply voltage
  2. GND: Ground
  3. SDA: I2C data line
  4. SCL: I2C clock line
  5. EN: Enable pin
  6. IN1: Input 1
  7. IN2: Input 2
  8. IN3: Input 3
  9. IN4: Input 4
  10. OUT: Output

(Note: The remaining pins are not listed for brevity)

Functional Features

  • Supports DisplayPort 1.2a standard
  • Automatic switching based on priority or manual control
  • Hot-plug detection and HPD (Hot Plug Detect) assertion
  • Low power consumption in standby mode
  • Built-in ESD protection

Advantages

  • High-speed data transmission
  • Seamless switching between DisplayPort sources
  • Compact package size
  • Easy integration into existing systems
  • Robust ESD protection

Disadvantages

  • Limited number of input ports (4 in this case)
  • Requires external control interface (I2C)

Working Principles

The PI3VDP411LSAZBE is designed to enable the switching of DisplayPort signals from multiple sources to a single sink. It operates based on the DisplayPort 1.2a standard and utilizes an I2C control interface for configuration and control.

When multiple input sources are connected to the IC, it automatically detects the active source through hot-plug detection. The switching between sources can be controlled either manually or based on priority settings. The selected input signal is then routed to the output port, allowing it to be displayed on the connected DisplayPort sink device.

Detailed Application Field Plans

  • Multi-monitor setups: Allows switching between different DisplayPort sources connected to multiple monitors.
  • Presentation systems: Enables seamless switching between various video sources during presentations.
  • Video production studios: Facilitates easy switching between different video sources for editing and monitoring purposes.
  • Gaming consoles: Provides the ability to switch between gaming consoles connected to a DisplayPort monitor.

Detailed and Complete Alternative Models

  • PI3HDX412LSAZBE: Similar functionality with additional HDMI compatibility.
  • PI3VDP421LSAZBE: Supports up to 8 input sources with enhanced switching capabilities.
  • PI3VDP431LSAZBE: Higher bandwidth version supporting up to 16 Gbps data rates.

(Note: The list of alternative models can be expanded based on specific requirements and availability in the market.)

This entry provides an overview of the PI3VDP411LSAZBE, a video DisplayPort switch IC. It includes basic information, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق PI3VDP411LSAZBE في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of PI3VDP411LSAZBE in technical solutions:

  1. Q: What is PI3VDP411LSAZBE? A: PI3VDP411LSAZBE is a specific type of voltage level shifter IC (integrated circuit) used for translating signals between different voltage domains.

  2. Q: What are the key features of PI3VDP411LSAZBE? A: Some key features of PI3VDP411LSAZBE include low power consumption, wide voltage translation range, bidirectional signal translation, and ESD protection.

  3. Q: In what applications can PI3VDP411LSAZBE be used? A: PI3VDP411LSAZBE can be used in various applications such as smartphones, tablets, laptops, gaming consoles, and other devices that require voltage level shifting.

  4. Q: How does PI3VDP411LSAZBE perform voltage level shifting? A: PI3VDP411LSAZBE uses a combination of MOSFETs and control logic to shift the voltage levels of input signals to match the required voltage levels of the output signals.

  5. Q: What is the voltage translation range of PI3VDP411LSAZBE? A: PI3VDP411LSAZBE supports voltage translation from 1.2V to 3.3V, making it suitable for many common voltage level shifting scenarios.

  6. Q: Can PI3VDP411LSAZBE handle bidirectional signal translation? A: Yes, PI3VDP411LSAZBE is designed to support bidirectional signal translation, allowing signals to be translated from one voltage domain to another and vice versa.

  7. Q: Does PI3VDP411LSAZBE provide any protection against electrostatic discharge (ESD)? A: Yes, PI3VDP411LSAZBE incorporates ESD protection features to safeguard against damage caused by electrostatic discharge events.

  8. Q: What is the power consumption of PI3VDP411LSAZBE? A: PI3VDP411LSAZBE has low power consumption, typically in the range of a few milliwatts, making it suitable for battery-powered devices.

  9. Q: Can PI3VDP411LSAZBE be used in high-speed data transmission applications? A: Yes, PI3VDP411LSAZBE supports high-speed data transmission up to several gigabits per second, making it suitable for various high-speed interfaces.

  10. Q: Are there any specific design considerations when using PI3VDP411LSAZBE? A: It is important to consider factors such as signal integrity, voltage compatibility, and proper decoupling when designing with PI3VDP411LSAZBE to ensure optimal performance and reliability.

Please note that these answers are general and may vary depending on the specific requirements and use cases of your technical solution.