قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
PI5USB30213XEAEX

PI5USB30213XEAEX

Product Overview

  • Category: USB Type-C Controller
  • Use: USB Type-C port control and power delivery management
  • Characteristics:
    • High-speed signal switching
    • Power delivery negotiation
    • Integrated protection features
  • Package: QFN (Quad Flat No-Lead)
  • Essence: USB Type-C controller for managing power delivery and signal switching in USB Type-C ports
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Input Voltage Range: 3.3V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Number of Pins: 24
  • Communication Interface: I2C
  • Supported USB Standards: USB 2.0, USB 3.2 Gen 1, USB Power Delivery 3.0
  • Protection Features: Overvoltage protection, overcurrent protection, short-circuit protection

Detailed Pin Configuration

The PI5USB30213XEAEX has the following pin configuration:

  1. VBUS
  2. CC1
  3. CC2
  4. SBU1
  5. SBU2
  6. D-
  7. D+
  8. GND
  9. VCONN
  10. VBUS_DET
  11. ALERT#
  12. INT#
  13. SDA
  14. SCL
  15. EN
  16. RST#
  17. TX1+
  18. TX1-
  19. TX2+
  20. TX2-
  21. RX1+
  22. RX1-
  23. RX2+
  24. RX2-

Functional Features

  • USB Type-C Port Control: The PI5USB30213XEAEX provides control and management of USB Type-C ports, including signal switching and power delivery negotiation.
  • Power Delivery Management: It supports USB Power Delivery 3.0 standard, allowing for efficient power delivery negotiation between devices.
  • High-Speed Signal Switching: The controller enables high-speed switching of USB signals, ensuring reliable data transfer.
  • Integrated Protection Features: It incorporates overvoltage protection, overcurrent protection, and short-circuit protection to safeguard connected devices.

Advantages and Disadvantages

Advantages: - Efficient power delivery management - High-speed signal switching capability - Integrated protection features ensure device safety

Disadvantages: - Limited to USB Type-C port control and power delivery management

Working Principles

The PI5USB30213XEAEX operates by communicating with the host system through the I2C interface. It receives commands from the host to control the USB Type-C port's signal routing and power delivery negotiation. The controller monitors the CC1 and CC2 pins to detect plug insertion and removal events. It also manages the VBUS voltage level and negotiates power delivery profiles with connected devices.

Detailed Application Field Plans

The PI5USB30213XEAEX is widely used in various applications that require USB Type-C port control and power delivery management. Some common application fields include:

  1. Laptops and Ultrabooks: Enables USB Type-C port functionality, including power delivery and data transfer.
  2. Smartphones and Tablets: Facilitates fast charging and data transfer capabilities through USB Type-C ports.
  3. Docking Stations: Manages power delivery and signal switching for multiple peripherals connected to a docking station.
  4. Monitors and Displays: Allows for video and audio transmission via USB Type-C ports, supporting alternate modes like DisplayPort.

Detailed and Complete Alternative Models

  1. PI5USB30213XEAEXR: Similar to PI5USB30213XEAEX but available in a different package (QFN-24)
  2. TUSB320LAI: USB Type-C and USB PD Controller with integrated power switches
  3. STUSB4500: USB Type-C and USB PD Controller with integrated protection features

These alternative models offer similar functionality to the PI5USB30213XEAEX and can be considered as alternatives based on specific requirements.

Word count: 455 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق PI5USB30213XEAEX في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of PI5USB30213XEAEX in technical solutions:

  1. Q: What is PI5USB30213XEAEX? A: PI5USB30213XEAEX is a USB Type-C port controller designed for managing power delivery and data communication in various technical solutions.

  2. Q: What are the key features of PI5USB30213XEAEX? A: Some key features include USB Power Delivery (PD) support, USB Type-C reversible connector, integrated CC logic, and configurable I2C interface.

  3. Q: How does PI5USB30213XEAEX support USB Power Delivery? A: PI5USB30213XEAEX supports USB PD by providing a programmable power supply and sink capability, allowing negotiation of power profiles between devices.

  4. Q: Can PI5USB30213XEAEX handle both power delivery and data communication? A: Yes, PI5USB30213XEAEX can handle both power delivery and data communication, making it suitable for applications requiring simultaneous power and data transfer.

  5. Q: What is the advantage of the integrated CC logic in PI5USB30213XEAEX? A: The integrated CC logic simplifies the design by eliminating the need for external components, reducing BOM cost and board space requirements.

  6. Q: How can I configure PI5USB30213XEAEX? A: PI5USB30213XEAEX can be configured using the I2C interface, allowing customization of various parameters such as power profiles, current limits, and control settings.

  7. Q: Is PI5USB30213XEAEX compatible with USB 2.0 and USB 3.0 standards? A: Yes, PI5USB30213XEAEX is backward compatible with USB 2.0 and USB 3.0 standards, ensuring compatibility with existing devices.

  8. Q: Can PI5USB30213XEAEX support alternate modes like DisplayPort or Thunderbolt? A: No, PI5USB30213XEAEX does not support alternate modes like DisplayPort or Thunderbolt. It primarily focuses on USB Power Delivery and data communication.

  9. Q: What are the typical applications of PI5USB30213XEAEX? A: PI5USB30213XEAEX is commonly used in laptops, tablets, docking stations, monitors, and other devices that require USB Type-C connectivity and power delivery.

  10. Q: Are there any evaluation boards or reference designs available for PI5USB30213XEAEX? A: Yes, Pericom (a Diodes Incorporated company) provides evaluation boards and reference designs to help developers quickly prototype and integrate PI5USB30213XEAEX into their solutions.

Please note that the answers provided here are general and may vary depending on specific use cases and requirements.