Diodes Incorporated
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
PT8A973PE
عرض التفاصيل جداول البيانات

PT8A973PE

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: 16-pin TSSOP (Thin Shrink Small Outline Package)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to 3.3V
  • Output Current: Up to 1.5A
  • Quiescent Current: 60µA (typical)
  • Dropout Voltage: 200mV at 1A load current
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PT8A973PE has a total of 16 pins, each serving a specific function:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. SS/TR: Soft-start/Tracking pin
  6. VOUT: Output voltage pin
  7. PGND: Power ground pin
  8. PGND: Power ground pin
  9. PGND: Power ground pin
  10. PGND: Power ground pin
  11. PGND: Power ground pin
  12. PGND: Power ground pin
  13. PGND: Power ground pin
  14. PGND: Power ground pin
  15. PGND: Power ground pin
  16. PGND: Power ground pin

Functional Features

  • High efficiency power management solution
  • Low power consumption for extended battery life
  • Wide input voltage range for versatile applications
  • Adjustable output voltage for flexibility
  • Overcurrent and thermal protection for enhanced safety
  • Soft-start and tracking capability for smooth power-up

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power wastage - Low power consumption extends battery life - Wide input voltage range allows compatibility with various power sources - Adjustable output voltage provides flexibility for different applications - Overcurrent and thermal protection ensure safe operation - Soft-start and tracking features enable smooth power-up

Disadvantages: - Limited output current capacity (up to 1.5A) - Dropout voltage may affect performance in low voltage scenarios

Working Principles

The PT8A973PE is a voltage regulator IC that converts an input voltage within the range of 2.7V to 5.5V into a stable output voltage between 0.6V and 3.3V. It achieves this by utilizing internal circuitry to regulate the voltage and maintain a constant output despite fluctuations in the input voltage.

The IC employs a feedback mechanism to continuously monitor the output voltage and adjust it as necessary. This ensures a stable and reliable power supply for connected devices. Additionally, the PT8A973PE incorporates various protection features such as overcurrent and thermal protection to safeguard against potential damage.

Detailed Application Field Plans

The PT8A973PE finds applications in a wide range of electronic devices that require efficient power management. Some of the common application fields include:

  1. Mobile Devices: Smartphones, tablets, portable media players
  2. Wearable Electronics: Smartwatches, fitness trackers
  3. IoT Devices: Connected sensors, smart home devices
  4. Portable Gaming Consoles: Handheld gaming devices
  5. Wireless Communication Systems: Bluetooth headsets, wireless earbuds
  6. Industrial Equipment: Battery-powered sensors, control systems

Detailed and Complete Alternative Models

  1. PT8A974PE: Similar to PT8A973PE but with higher output current capacity (up to 2A)
  2. PT8A972PE: Similar to PT8A973PE but with lower dropout voltage (150mV at 1A load current)
  3. PT8A971PE: Similar to PT8A973PE but with fixed output voltage options (e.g., 1.8V, 2.5V, 3.0V)

These alternative models provide options for different power requirements and specific application needs.

Word count: 408 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق PT8A973PE في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of PT8A973PE in technical solutions:

  1. Q: What is PT8A973PE? A: PT8A973PE is a specific model of integrated circuit (IC) used in various technical solutions.

  2. Q: What are the main features of PT8A973PE? A: PT8A973PE features include multiple input/output pins, voltage regulation capabilities, and built-in protection mechanisms.

  3. Q: What are the typical applications of PT8A973PE? A: PT8A973PE is commonly used in power management systems, battery charging circuits, and other electronic devices requiring voltage regulation.

  4. Q: How does PT8A973PE regulate voltage? A: PT8A973PE uses internal feedback mechanisms and control algorithms to adjust the output voltage based on the input and load conditions.

  5. Q: Can PT8A973PE handle high currents? A: Yes, PT8A973PE can handle moderate to high currents depending on the specific model and configuration.

  6. Q: Is PT8A973PE compatible with different microcontrollers or processors? A: Yes, PT8A973PE can be interfaced with various microcontrollers or processors through its input/output pins.

  7. Q: Does PT8A973PE have any built-in protection features? A: Yes, PT8A973PE incorporates protection features such as overvoltage protection, overcurrent protection, and thermal shutdown.

  8. Q: What is the operating temperature range for PT8A973PE? A: The operating temperature range for PT8A973PE typically falls between -40°C to +85°C.

  9. Q: Can PT8A973PE operate from a single power supply? A: Yes, PT8A973PE can operate from a single power supply within the specified voltage range.

  10. Q: Are there any specific design considerations when using PT8A973PE? A: It is important to consider factors such as input/output voltage requirements, load characteristics, and thermal management while designing with PT8A973PE.

Please note that these questions and answers are general in nature and may vary depending on the specific application and requirements.