Diodes Incorporated
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
UDZ11B-7
عرض التفاصيل جداول البيانات

UDZ11B-7 Product Overview

Introduction

UDZ11B-7 is a component belonging to the category of Zener diodes, which are widely used in electronic circuits for voltage regulation and protection. This entry provides an overview of the basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of UDZ11B-7.

Basic Information Overview

  • Category: Zener Diode
  • Use: Voltage regulation and protection in electronic circuits
  • Characteristics: Precise voltage regulation, low impedance, high reliability
  • Package: SOD-323F
  • Essence: Semiconductor device for maintaining a stable voltage across a load
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Voltage Range: 6.8V to 7.2V
  • Power Dissipation: 200mW
  • Operating Temperature: -55°C to +150°C
  • Storage Temperature: -55°C to +150°C

Detailed Pin Configuration

The UDZ11B-7 Zener diode has a standard SOD-323F package with two pins. The pinout configuration is as follows: 1. Pin 1: Anode 2. Pin 2: Cathode

Functional Features

  • Precise voltage regulation
  • Low dynamic impedance
  • High reliability and stability
  • Fast response time

Advantages and Disadvantages

Advantages

  • Provides stable voltage regulation
  • Low impedance ensures minimal power loss
  • Reliable performance in various operating conditions

Disadvantages

  • Limited voltage range
  • Sensitivity to temperature variations

Working Principles

UDZ11B-7 operates based on the Zener effect, where it maintains a constant voltage drop across its terminals by allowing current to flow in reverse bias when the applied voltage reaches its breakdown voltage.

Detailed Application Field Plans

UDZ11B-7 is commonly used in the following applications: - Voltage regulators in power supplies - Overvoltage protection in electronic circuits - Signal clamping and limiting

Detailed and Complete Alternative Models

Some alternative models to UDZ11B-7 include: - BZX84C6V8 - MMSZ5245BT1G - MM3Z6V8ST1G

In conclusion, UDZ11B-7 Zener diode is a reliable component for voltage regulation and protection in electronic circuits, offering precise regulation, low impedance, and high reliability. Its working principle, application field plans, and alternative models provide a comprehensive understanding of its usage in various electronic systems.

[Word Count: 411]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق UDZ11B-7 في الحلول التقنية

  1. What is UDZ11B-7?

    • UDZ11B-7 is a zener diode with a voltage rating of 11V and a power dissipation of 200mW.

  2. What are the typical applications of UDZ11B-7?

    • UDZ11B-7 is commonly used in voltage regulation, overvoltage protection, and signal clamping applications.

  3. What is the maximum current that UDZ11B-7 can handle?

    • The maximum current for UDZ11B-7 is typically around 5mA.

  4. How does UDZ11B-7 provide overvoltage protection?

    • UDZ11B-7 conducts when the voltage across it exceeds its rated voltage, effectively shunting excess current to protect downstream components.

  5. Can UDZ11B-7 be used in reverse bias?

    • Yes, UDZ11B-7 can be used in reverse bias as a voltage reference or for voltage clamping applications.

  6. What is the temperature coefficient of UDZ11B-7?

    • The temperature coefficient of UDZ11B-7 is typically around +5mV/°C.

  7. Is UDZ11B-7 suitable for precision voltage references?

    • While UDZ11B-7 provides stable voltage references, its tolerance may not be suitable for precision applications without additional trimming.

  8. What are the package options available for UDZ11B-7?

    • UDZ11B-7 is commonly available in small surface-mount packages such as SOD-323 and SOT-23.

  9. Can UDZ11B-7 be used in low-power battery-operated devices?

    • Yes, UDZ11B-7's low power dissipation makes it suitable for use in low-power applications.

  10. Are there any precautions to consider when using UDZ11B-7 in technical solutions?

    • It's important to ensure proper heat dissipation and current limiting to prevent damage to the diode. Additionally, attention should be paid to its voltage tolerance in precision applications.