E-T-A
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
8340-T110-K1M2-ALH0-0.25A
عرض التفاصيل جداول البيانات

8340-T110-K1M2-ALH0-0.25A

Product Category: Electronic Component

Basic Information Overview:

  • Category: Voltage Regulator
  • Use: To regulate voltage in electronic circuits
  • Characteristics: Small form factor, high precision, low power consumption
  • Package: Surface mount package
  • Essence: Provides stable voltage output for electronic devices
  • Packaging/Quantity: Typically packaged in reels of 3000 units

Specifications:

  • Input Voltage Range: 3V to 5.5V
  • Output Voltage: 1.8V
  • Output Current: 250mA
  • Dropout Voltage: 200mV
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration:

  • Pin 1: VIN (Input Voltage)
  • Pin 2: GND (Ground)
  • Pin 3: VOUT (Output Voltage)

Functional Features:

  • High accuracy and stability over temperature and load variations
  • Low dropout voltage
  • Thermal shutdown and current limit protection

Advantages:

  • Small footprint
  • Wide input voltage range
  • Low quiescent current

Disadvantages:

  • Limited output current
  • Sensitive to input voltage transients

Working Principles:

The 8340-T110-K1M2-ALH0-0.25A is a linear voltage regulator that uses a feedback mechanism to maintain a constant output voltage regardless of changes in input voltage or load.

Detailed Application Field Plans:

  • Portable electronic devices
  • Battery-powered applications
  • IoT devices

Detailed and Complete Alternative Models:

  • 8340-T120-K1M2-ALH0-0.5A
  • 8340-T150-K1M2-ALH0-1A
  • 8340-T180-K1M2-ALH0-1.5A

This completes the entry for the 8340-T110-K1M2-ALH0-0.25A in the English editing encyclopedia format.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق 8340-T110-K1M2-ALH0-0.25A في الحلول التقنية

  1. What is the application of 8340-T110-K1M2-ALH0-0.25A in technical solutions?

    • The 8340-T110-K1M2-ALH0-0.25A is commonly used as a precision resistor in various technical solutions, such as in circuit design and calibration.

  2. What are the key specifications of 8340-T110-K1M2-ALH0-0.25A?

    • The 8340-T110-K1M2-ALH0-0.25A typically has a resistance value of 0.25 ohms with a tolerance of ±1% and a power rating of 0.25 watts.

  3. How can 8340-T110-K1M2-ALH0-0.25A be utilized in circuit design?

    • This resistor can be used to limit current, divide voltages, terminate transmission lines, and perform other functions in electronic circuits.

  4. In what types of technical solutions is 8340-T110-K1M2-ALH0-0.25A commonly employed?

    • It is often used in applications such as power supplies, motor control, instrumentation, and automotive electronics.

  5. What are the temperature coefficient and operating temperature range of 8340-T110-K1M2-ALH0-0.25A?

    • The temperature coefficient is typically around 100 ppm/°C, and the operating temperature range is from -55°C to +155°C.

  6. Can 8340-T110-K1M2-ALH0-0.25A be used in high-frequency applications?

    • Yes, it can be used in high-frequency applications due to its stable performance and low inductance.

  7. Are there any special considerations for soldering 8340-T110-K1M2-ALH0-0.25A?

    • It is recommended to follow proper soldering techniques and adhere to the specified temperature and duration to avoid damaging the resistor.

  8. What are the typical mounting options for 8340-T110-K1M2-ALH0-0.25A?

    • This resistor can be mounted on printed circuit boards using surface mount technology (SMT) or through-hole mounting.

  9. Does 8340-T110-K1M2-ALH0-0.25A require any additional heat sinking or cooling measures?

    • In most cases, this resistor does not require additional heat sinking or cooling measures due to its low power dissipation.

  10. Where can I find detailed technical documentation for 8340-T110-K1M2-ALH0-0.25A?

    • Detailed technical specifications and application notes for this resistor can be found in the manufacturer's datasheet or product documentation.