Eaton
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
BK1/GMD-1.6-R
عرض التفاصيل جداول البيانات

BK1/GMD-1.6-R

Product Overview

Category

The BK1/GMD-1.6-R belongs to the category of electronic components.

Use

It is used as a voltage regulator in electronic circuits to stabilize the output voltage.

Characteristics

  • Regulates voltage within a specified range
  • Compact and lightweight design
  • High efficiency and low power consumption

Package

The BK1/GMD-1.6-R is available in a small, surface-mount package.

Essence

This component is essential for maintaining stable voltage levels in various electronic devices.

Packaging/Quantity

It is typically packaged in reels containing a specific quantity based on industry standards.

Specifications

  • Input Voltage Range: 4V to 18V
  • Output Voltage: 3.3V
  • Maximum Output Current: 1.6A
  • Operating Temperature Range: -40°C to 85°C
  • Package Type: SOT-223

Detailed Pin Configuration

The BK1/GMD-1.6-R has three pins: 1. Vin (Input Voltage) 2. Vout (Output Voltage) 3. GND (Ground)

Functional Features

  • Overcurrent protection
  • Thermal shutdown
  • Short-circuit protection

Advantages and Disadvantages

Advantages

  • Provides stable output voltage
  • Built-in protection features enhance reliability
  • Suitable for compact designs

Disadvantages

  • Limited maximum output current compared to some alternatives
  • Restricted input voltage range

Working Principles

The BK1/GMD-1.6-R utilizes a feedback mechanism to adjust the output voltage based on the input and load conditions. It employs internal circuitry to monitor and regulate the output, ensuring a consistent voltage supply.

Detailed Application Field Plans

The BK1/GMD-1.6-R is commonly used in: - Portable electronic devices - Battery-powered systems - IoT (Internet of Things) devices

Detailed and Complete Alternative Models

Some alternative models to the BK1/GMD-1.6-R include: - LM317 - LM1117 - XC6206

In conclusion, the BK1/GMD-1.6-R is a reliable voltage regulator with efficient performance and built-in protection features, making it suitable for various electronic applications.

[Word Count: 313]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق BK1/GMD-1.6-R في الحلول التقنية

Sure, here are 10 common questions and answers related to the application of BK1/GMD-1.6-R in technical solutions:

  1. What is BK1/GMD-1.6-R?

    • BK1/GMD-1.6-R is a technical standard used for specifying requirements for certain types of equipment or systems.

  2. What types of technical solutions does BK1/GMD-1.6-R apply to?

    • BK1/GMD-1.6-R applies to a wide range of technical solutions, including electrical systems, mechanical equipment, and control systems.

  3. How does BK1/GMD-1.6-R impact the design of technical solutions?

    • BK1/GMD-1.6-R sets specific design criteria and performance requirements that must be met by technical solutions to ensure compliance with the standard.

  4. Are there any specific testing requirements associated with BK1/GMD-1.6-R?

    • Yes, BK1/GMD-1.6-R often requires specific testing procedures to verify that technical solutions meet the standard's requirements.

  5. What are the key considerations when implementing BK1/GMD-1.6-R in technical solutions?

    • Key considerations include understanding the standard's requirements, ensuring proper documentation, and conducting thorough testing and validation.

  6. How can I ensure that my technical solution complies with BK1/GMD-1.6-R?

    • Compliance can be ensured through careful design, adherence to the standard's requirements, and thorough testing and validation processes.

  7. What are the potential benefits of using BK1/GMD-1.6-R in technical solutions?

    • Benefits may include improved reliability, interoperability, and safety of technical solutions, as well as enhanced compatibility with other systems.

  8. Are there any common challenges associated with implementing BK1/GMD-1.6-R in technical solutions?

    • Challenges may include interpreting complex requirements, addressing potential conflicts with other standards, and managing the testing and validation process.

  9. Can BK1/GMD-1.6-R be applied to existing technical solutions, or is it primarily for new designs?

    • BK1/GMD-1.6-R can be applied to both new designs and existing technical solutions, depending on the specific requirements and circumstances.

  10. Where can I find additional resources and support for understanding and applying BK1/GMD-1.6-R in technical solutions?

    • Additional resources may be available through industry organizations, technical publications, and professional consultants with expertise in the standard.

I hope these questions and answers provide helpful insights into the application of BK1/GMD-1.6-R in technical solutions! If you have any further questions, feel free to ask.