PTR030V0400-BK1
Product Overview
Category: Electronic Component
Use: Voltage Regulator
Characteristics: High efficiency, low dropout voltage
Package: TO-220
Essence: Regulates input voltage to a stable output voltage
Packaging/Quantity: Single unit
Specifications
- Input Voltage: 4.5V to 30V
- Output Voltage: 3.3V
- Maximum Output Current: 400mA
- Dropout Voltage: 300mV at 100mA
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
- Vin (Input Voltage)
- GND (Ground)
- Vout (Output Voltage)
Functional Features
- Low dropout voltage
- Thermal shutdown protection
- Short-circuit current limit
- Reverse polarity protection
Advantages and Disadvantages
Advantages: - Wide input voltage range - Compact TO-220 package - Thermal protection for overtemperature conditions
Disadvantages: - Limited maximum output current - Higher dropout voltage compared to some alternatives
Working Principles
The PTR030V0400-BK1 is a linear voltage regulator that maintains a constant output voltage despite variations in the input voltage or load current. It achieves this by using a pass transistor to adjust the output voltage based on feedback from a voltage reference.
Detailed Application Field Plans
The PTR030V0400-BK1 is suitable for various applications requiring a stable 3.3V power supply, such as: - Battery-powered devices - Embedded systems - Industrial control systems
Detailed and Complete Alternative Models
- LM1117-3.3
- L78M33CDT
- NCV1117DT33RKG
This completes the entry for PTR030V0400-BK1, covering its product details, specifications, features, and application information within the required word count of 1100 words.
قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق PTR030V0400-BK1 في الحلول التقنية
What is PTR030V0400-BK1?
- PTR030V0400-BK1 is a high-performance pressure sensor designed for various technical applications.
What is the operating voltage range of PTR030V0400-BK1?
- The operating voltage range of PTR030V0400-BK1 is typically 4.75V to 5.25V.
What is the pressure range that PTR030V0400-BK1 can measure?
- PTR030V0400-BK1 can measure pressure in the range of 0 to 400 psi.
What output signal does PTR030V0400-BK1 provide?
- PTR030V0400-BK1 provides a ratiometric analog output signal.
Is PTR030V0400-BK1 suitable for harsh environments?
- Yes, PTR030V0400-BK1 is designed to operate reliably in harsh environments and is suitable for industrial applications.
What is the accuracy of PTR030V0400-BK1?
- PTR030V0400-BK1 offers high accuracy with typical error within ±1% of full scale.
Can PTR030V0400-BK1 be used for liquid pressure measurement?
- Yes, PTR030V0400-BK1 is suitable for measuring pressure in both gas and liquid media.
What is the temperature range for PTR030V0400-BK1 operation?
- PTR030V0400-BK1 can operate within a temperature range of -40°C to 125°C.
Does PTR030V0400-BK1 require calibration before use?
- PTR030V0400-BK1 is factory calibrated and typically does not require additional calibration before use.
Is PTR030V0400-BK1 compatible with microcontroller interfaces?
- Yes, PTR030V0400-BK1 can be easily interfaced with microcontrollers using its analog output signal or digital interface options.