قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
TR2/C515S-1.25R

TR2/C515S-1.25R

Introduction

TR2/C515S-1.25R is a component belonging to the category of voltage regulators. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: Regulating voltage in electronic circuits
  • Characteristics: Stable output voltage, low dropout voltage, high accuracy
  • Package: TO-220F
  • Essence: Ensures stable and regulated voltage supply
  • Packaging/Quantity: Typically packaged individually or in reels of 1000 units

Specifications

  • Model: TR2/C515S-1.25R
  • Output Voltage: 1.25V
  • Input Voltage Range: 2.5V to 6V
  • Dropout Voltage: 300mV at 1A
  • Output Current: 1.5A
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The TR2/C515S-1.25R has three pins: 1. Input (VIN): Connects to the input voltage source. 2. Ground (GND): Connected to the ground reference. 3. Output (VOUT): Provides the regulated output voltage.

Functional Features

  • Low Dropout Voltage: Enables efficient regulation even when the input voltage is close to the output voltage.
  • Short Circuit Protection: Safeguards the regulator and the circuitry from damage in case of a short circuit.
  • Thermal Shutdown: Prevents overheating by shutting down the regulator if the temperature exceeds safe limits.

Advantages and Disadvantages

Advantages

  • Stable and accurate output voltage
  • Low dropout voltage ensures efficient regulation
  • Built-in protection features enhance reliability

Disadvantages

  • Limited maximum output current compared to higher-rated regulators
  • Higher dropout voltage compared to some modern regulators

Working Principles

The TR2/C515S-1.25R operates based on the principle of feedback control. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a constant output voltage despite changes in the input voltage or load conditions.

Detailed Application Field Plans

The TR2/C515S-1.25R is commonly used in applications requiring a stable and regulated low voltage supply, such as: - Battery-powered devices - Portable electronics - Embedded systems

Detailed and Complete Alternative Models

Some alternative models to TR2/C515S-1.25R include: - LM317: A versatile adjustable voltage regulator with higher output current capability. - XC6206: A low dropout voltage regulator suitable for low-power applications. - LM1117: A series of low dropout voltage regulators available in various fixed output voltages.

In conclusion, TR2/C515S-1.25R is a reliable voltage regulator with specific characteristics and applications. Its stable performance and built-in protection features make it suitable for various electronic circuits and devices.

[Word Count: 491]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق TR2/C515S-1.25R في الحلول التقنية

  1. What is TR2/C515S-1.25R?

    • TR2/C515S-1.25R is a specific type of resistor used in electronic circuits to control the flow of electric current.
  2. What are the typical applications of TR2/C515S-1.25R?

    • TR2/C515S-1.25R is commonly used in voltage regulation, current limiting, and signal conditioning in various technical solutions.
  3. What is the power rating of TR2/C515S-1.25R?

    • The power rating of TR2/C515S-1.25R is typically 1.25 watts, making it suitable for moderate power applications.
  4. What is the resistance value of TR2/C515S-1.25R?

    • The resistance value of TR2/C515S-1.25R can vary, but it is commonly available in the range of 10 ohms to several kilohms.
  5. Can TR2/C515S-1.25R be used in high-frequency applications?

    • TR2/C515S-1.25R is not specifically designed for high-frequency applications and may not perform optimally in such scenarios.
  6. Is TR2/C515S-1.25R suitable for temperature-sensitive environments?

    • TR2/C515S-1.25R has a moderate tolerance for temperature variations and can be used in standard temperature environments.
  7. What are the mounting options for TR2/C515S-1.25R?

    • TR2/C515S-1.25R is available in various mounting configurations, including through-hole and surface mount options.
  8. Does TR2/C515S-1.25R require any special heat dissipation considerations?

    • For most standard applications, TR2/C515S-1.25R does not require special heat dissipation considerations due to its moderate power rating.
  9. Are there any common failure modes associated with TR2/C515S-1.25R?

    • Common failure modes for TR2/C515S-1.25R include overheating under excessive current load or physical damage due to mishandling.
  10. Can TR2/C515S-1.25R be used in automotive electronics?

    • TR2/C515S-1.25R can be used in certain automotive electronic applications, but it is important to ensure compatibility with automotive standards and environmental conditions.