EPCOS (TDK)
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
B72582V0140K062

B72582V0140K062

Product Overview

Category

The B72582V0140K062 belongs to the category of varistors, which are electronic components used for voltage regulation and surge protection.

Use

This varistor is commonly used in electronic circuits to protect sensitive components from voltage spikes and transient overvoltage conditions.

Characteristics

  • Voltage Regulation: The varistor can quickly respond to overvoltage conditions, diverting excess current away from sensitive components.
  • High Energy Absorption: Capable of absorbing high levels of energy during transient events.
  • Reliable Performance: Provides consistent protection against voltage surges.
  • Compact Package: Small form factor for easy integration into electronic circuits.

Package

The B72582V0140K062 varistor is typically available in a cylindrical package with lead wires for easy soldering onto circuit boards.

Packaging/Quantity

The varistor is usually packaged in reels or trays, with quantities varying based on manufacturer specifications.

Specifications

  • Part Number: B72582V0140K062
  • Maximum Allowable Voltage: 14V
  • Nominal Varistor Voltage: 11V
  • Peak Current Capability: 6.2kA
  • Operating Temperature Range: -40°C to 85°C
  • Lead Spacing: 5mm

Detailed Pin Configuration

The varistor has two lead wires for connection to the circuit. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • Surge Protection: Safeguards electronic circuits by diverting excessive voltage away from sensitive components.
  • Fast Response Time: Quickly reacts to overvoltage conditions to minimize potential damage.
  • High Energy Absorption: Capable of dissipating large amounts of energy during transient events.

Advantages and Disadvantages

Advantages

  • Effective surge protection
  • Fast response time
  • Compact size for easy integration

Disadvantages

  • Limited maximum allowable voltage
  • Operating temperature range may not be suitable for extreme environments

Working Principles

The varistor operates based on the principle of nonlinear resistance, where its resistance decreases as the voltage across it increases. This allows it to effectively shunt excess current during overvoltage events.

Detailed Application Field Plans

The B72582V0140K062 varistor finds applications in various electronic systems, including: - Power supply units - Telecommunication equipment - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

  • B72582V0200K062
  • B72582V0250K062
  • B72582V0300K062
  • B72582V0400K062

This comprehensive range of alternative models provides flexibility in selecting varistors with different voltage ratings while maintaining similar characteristics.

This content provides a detailed overview of the B72582V0140K062 varistor, covering its basic information, specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق B72582V0140K062 في الحلول التقنية

  1. What is the application of B72582V0140K062 in technical solutions?

    • B72582V0140K062 is commonly used as a surface mount varistor for overvoltage protection in various electronic circuits and systems.

  2. How does B72582V0140K062 provide overvoltage protection?

    • B72582V0140K062 acts as a voltage-dependent resistor, conducting current when the voltage exceeds a certain threshold, thereby diverting excess energy away from sensitive components.

  3. What are the typical operating parameters for B72582V0140K062?

    • B72582V0140K062 typically operates within a voltage range of 14V and has a maximum peak current of 6kA.

  4. In what types of technical applications is B72582V0140K062 commonly used?

    • B72582V0140K062 is commonly used in power supplies, automotive electronics, industrial equipment, and telecommunications systems to protect against transient overvoltage events.

  5. What are the key characteristics of B72582V0140K062 that make it suitable for technical solutions?

    • B72582V0140K062 offers high surge current capability, low leakage current, and fast response time, making it ideal for protecting sensitive electronic components.

  6. Are there any specific mounting or handling considerations for B72582V0140K062?

    • B72582V0140K062 is a surface mount device and should be handled and mounted according to the manufacturer's recommended guidelines to ensure proper performance.

  7. Can B72582V0140K062 be used in conjunction with other protective components?

    • Yes, B72582V0140K062 can be used in combination with other protective components such as fuses, TVS diodes, and inductors to create comprehensive overvoltage protection schemes.

  8. What are the temperature and environmental considerations for B72582V0140K062?

    • B72582V0140K062 has an operating temperature range of -40°C to +85°C and is designed to withstand harsh environmental conditions.

  9. Is B72582V0140K062 RoHS compliant?

    • Yes, B72582V0140K062 is compliant with the Restriction of Hazardous Substances (RoHS) directive, making it suitable for use in environmentally conscious applications.

  10. Where can I find detailed technical specifications and application notes for B72582V0140K062?

    • Detailed technical specifications and application notes for B72582V0140K062 can be found on the manufacturer's website or in the product datasheet.