Exar Corporation
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
ST16C2450IQ48-F
عرض التفاصيل جداول البيانات

ST16C2450IQ48-F

Product Overview

Category

The ST16C2450IQ48-F belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used for serial communication applications.

Characteristics

  • High-speed data transfer capability
  • Low power consumption
  • Compact size
  • Reliable performance

Package

The ST16C2450IQ48-F is available in a 48-pin quad flat package (QFP).

Essence

This IC serves as a bridge between parallel and serial communication interfaces, enabling efficient data transfer between devices.

Packaging/Quantity

The ST16C2450IQ48-F is typically packaged in reels or trays, with a quantity of 250 units per reel/tray.

Specifications

  • Data Transfer Rate: Up to 1 Mbps
  • Supply Voltage: 3.3V
  • Operating Temperature Range: -40°C to +85°C
  • Number of Channels: 2
  • Interface Type: UART (Universal Asynchronous Receiver Transmitter)
  • Package Type: QFP
  • Pin Count: 48

Detailed Pin Configuration

The ST16C2450IQ48-F has a total of 48 pins, each serving a specific function. The pin configuration is as follows:

(Pin diagram goes here)

Functional Features

  • Dual-channel UART functionality
  • Support for various baud rates
  • Programmable control registers
  • Interrupt capability for efficient data handling
  • Auto-flow control for seamless data transmission

Advantages and Disadvantages

Advantages

  • High-speed data transfer
  • Low power consumption
  • Compact size for space-constrained applications
  • Reliable performance even in harsh environments

Disadvantages

  • Limited number of channels (2)
  • Requires external components for complete system integration

Working Principles

The ST16C2450IQ48-F operates based on the principles of UART communication. It receives parallel data from a device, converts it into serial format, and transmits it to another device through a serial interface. Similarly, it can receive serial data, convert it into parallel format, and send it to the receiving device.

Detailed Application Field Plans

The ST16C2450IQ48-F finds applications in various fields, including:

  1. Industrial Automation: Used for communication between PLCs (Programmable Logic Controllers) and other industrial devices.
  2. Telecommunications: Enables data transfer between modems, routers, and other network equipment.
  3. Consumer Electronics: Facilitates communication between microcontrollers and peripheral devices such as displays, sensors, and memory modules.
  4. Automotive: Used in automotive electronics for communication between different control units within a vehicle.

Detailed and Complete Alternative Models

  1. ST16C2450IQ64-F: Similar to ST16C2450IQ48-F but with 64-pin QFP package.
  2. ST16C2450IP48-F: Same functionality as ST16C2450IQ48-F but with 48-pin plastic DIP package.
  3. ST16C2450IP64-F: Similar to ST16C2450IQ64-F but with 64-pin plastic DIP package.

(Note: The above alternative models are just examples and not an exhaustive list.)

In conclusion, the ST16C2450IQ48-F is a versatile integrated circuit that enables efficient serial communication. With its high-speed data transfer capability, low power consumption, and compact size, it is widely used in various industries for reliable and seamless data transmission.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق ST16C2450IQ48-F في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of ST16C2450IQ48-F in technical solutions:

  1. Q: What is the ST16C2450IQ48-F? A: The ST16C2450IQ48-F is a UART (Universal Asynchronous Receiver/Transmitter) integrated circuit that provides serial communication capabilities in technical solutions.

  2. Q: What are the key features of the ST16C2450IQ48-F? A: The key features of the ST16C2450IQ48-F include high-speed data transfer rates, multiple UART channels, FIFO buffers, programmable baud rates, and compatibility with various microcontrollers.

  3. Q: How many UART channels does the ST16C2450IQ48-F support? A: The ST16C2450IQ48-F supports up to four independent UART channels, allowing for simultaneous communication with multiple devices.

  4. Q: What is the maximum data transfer rate supported by the ST16C2450IQ48-F? A: The ST16C2450IQ48-F supports high-speed data transfer rates up to 5 Mbps, making it suitable for applications requiring fast serial communication.

  5. Q: Can the ST16C2450IQ48-F be used with different microcontrollers? A: Yes, the ST16C2450IQ48-F is compatible with a wide range of microcontrollers, making it versatile for integration into various technical solutions.

  6. Q: Does the ST16C2450IQ48-F have built-in FIFO buffers? A: Yes, the ST16C2450IQ48-F has 16-byte transmit and receive FIFO buffers per UART channel, which help in reducing CPU overhead and improving performance.

  7. Q: Can I program the baud rate of the ST16C2450IQ48-F? A: Yes, the ST16C2450IQ48-F allows for programmable baud rates, providing flexibility in configuring the serial communication speed according to the application requirements.

  8. Q: What voltage levels does the ST16C2450IQ48-F support? A: The ST16C2450IQ48-F supports both 3.3V and 5V voltage levels, making it compatible with a wide range of systems and devices.

  9. Q: Is the ST16C2450IQ48-F suitable for industrial applications? A: Yes, the ST16C2450IQ48-F is designed to meet the requirements of industrial applications, offering robustness, reliability, and extended temperature range.

  10. Q: Where can I find more information about the ST16C2450IQ48-F? A: You can find more detailed information about the ST16C2450IQ48-F, including datasheets, application notes, and technical documentation on the manufacturer's website or by contacting their customer support.