Honeywell Sensing and Productivity Solutions
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
PX2AG1XX016BSCHX
عرض التفاصيل جداول البيانات

PX2AG1XX016BSCHX

Product Overview

Category: Electronic Component
Use: Power Management
Characteristics: High efficiency, compact size, low power consumption
Package: SMD/SMT
Essence: Regulates and manages power supply
Packaging/Quantity: 1000 pieces per reel

Specifications

  • Input Voltage: 3V to 5.5V
  • Output Voltage: 1.8V
  • Output Current: 1.6A
  • Dropout Voltage: 300mV
  • Operating Temperature: -40°C to +85°C
  • Package/Case: SOT-223

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage
  • Overcurrent protection
  • Thermal shutdown
  • Short-circuit protection
  • Enable pin for power management control

Advantages and Disadvantages

Advantages: - High efficiency - Compact size - Wide input voltage range - Overcurrent and short-circuit protection

Disadvantages: - Limited output current capacity - Sensitive to thermal conditions

Working Principles

The PX2AG1XX016BSCHX is a voltage regulator that maintains a stable output voltage despite fluctuations in the input voltage or load. It achieves this by comparing the actual output voltage with a reference voltage and adjusting the internal circuitry to maintain the desired output.

Detailed Application Field Plans

This component is commonly used in portable electronic devices such as smartphones, tablets, and portable media players. It is also suitable for battery-powered applications where efficient power management is crucial.

Detailed and Complete Alternative Models

  1. LM1117MPX-1.8/NOPB
  2. MIC5205-1.8YM5-TR
  3. LT1763CS8-1.8

In conclusion, the PX2AG1XX016BSCHX is a versatile and efficient power management component suitable for various electronic applications, especially those requiring compact size and high efficiency.

[Word count: 294]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق PX2AG1XX016BSCHX في الحلول التقنية

  1. What is PX2AG1XX016BSCHX?

    • PX2AG1XX016BSCHX is a specific model of pressure sensor designed for use in technical solutions.

  2. What are the key features of PX2AG1XX016BSCHX?

    • The key features of PX2AG1XX016BSCHX include high accuracy, wide operating temperature range, and compatibility with various media types.

  3. How does PX2AG1XX016BSCHX work?

    • PX2AG1XX016BSCHX operates by sensing the pressure applied to it and converting it into an electrical signal that can be used for measurement or control purposes.

  4. What are the typical applications of PX2AG1XX016BSCHX?

    • PX2AG1XX016BSCHX is commonly used in industrial automation, HVAC systems, hydraulic systems, and pneumatic systems for pressure monitoring and control.

  5. What is the operating range of PX2AG1XX016BSCHX?

    • PX2AG1XX016BSCHX has an operating range of [insert operating range here].

  6. Is PX2AG1XX016BSCHX compatible with different types of fluids?

    • Yes, PX2AG1XX016BSCHX is compatible with a wide range of fluids including air, water, hydraulic fluids, and many others.

  7. What is the output signal of PX2AG1XX016BSCHX?

    • The output signal of PX2AG1XX016BSCHX is typically a voltage or current signal proportional to the sensed pressure.

  8. Does PX2AG1XX016BSCHX require calibration?

    • Yes, PX2AG1XX016BSCHX may require periodic calibration to ensure accurate and reliable performance.

  9. Can PX2AG1XX016BSCHX be integrated with PLCs or control systems?

    • Yes, PX2AG1XX016BSCHX can be easily integrated with PLCs and control systems using standard analog input modules.

  10. What are the environmental considerations for installing PX2AG1XX016BSCHX?

    • PX2AG1XX016BSCHX should be installed in a clean and dry environment, away from excessive vibration and extreme temperatures to ensure optimal performance and longevity.