Honeywell Sensing and Productivity Solutions
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
SDP8601-002
عرض التفاصيل جداول البيانات

SDP8601-002: Product Overview

Introduction

The SDP8601-002 is a versatile integrated circuit that belongs to the category of power management devices. This product is designed to provide efficient and reliable power management solutions for various electronic applications.

Basic Information Overview

  • Category: Power Management IC
  • Use: Regulating and controlling power supply in electronic devices
  • Characteristics: High efficiency, compact design, versatile application
  • Package: Small outline package (SOP), 16-pin
  • Essence: Efficient power regulation and control
  • Packaging/Quantity: Available in tape and reel packaging, quantity per reel varies

Specifications

The SDP8601-002 features the following specifications: - Input Voltage Range: 4.5V to 36V - Output Voltage Range: 0.8V to 24V - Maximum Output Current: 3A - Operating Temperature Range: -40°C to 125°C - Switching Frequency: Adjustable up to 2MHz

Detailed Pin Configuration

The pin configuration of the SDP8601-002 is as follows:

  1. VIN: Input voltage
  2. PGND: Power ground
  3. SW: Switch node
  4. FB: Feedback input
  5. COMP: Compensation
  6. SS/TR: Soft-start/tracking
  7. EN: Enable
  8. VCC: Control voltage
  9. AGND: Analog ground
  10. BOOT: Bootstrap
  11. PH: Phase
  12. RT/CLK: Timing resistor/clock
  13. SS/TR: Soft-start/tracking
  14. ILIM: Current limit
  15. PGND: Power ground
  16. VOUT: Output voltage

Functional Features

The SDP8601-002 offers the following functional features: - Wide input voltage range for versatile applications - Adjustable output voltage and switching frequency - Integrated protection features including overcurrent and thermal shutdown - Soft-start and tracking functionality for controlled power-up sequences

Advantages and Disadvantages

Advantages: - High efficiency leading to reduced power consumption - Compact design suitable for space-constrained applications - Versatile input and output voltage ranges for flexibility

Disadvantages: - Higher cost compared to traditional linear regulators - Sensitive to external noise due to high switching frequency

Working Principles

The SDP8601-002 operates based on the principles of pulse-width modulation (PWM) to regulate the output voltage. It utilizes an internal control loop to maintain the desired output voltage by adjusting the duty cycle of the switching signal.

Detailed Application Field Plans

The SDP8601-002 is well-suited for a wide range of applications including: - Industrial automation systems - Automotive electronics - Telecommunication equipment - Consumer electronics - Renewable energy systems

Detailed and Complete Alternative Models

Some alternative models to the SDP8601-002 include: - SDP8602-002: Similar specifications with enhanced thermal performance - SDP8601-001: Lower output current capability for less demanding applications - SDP8603-002: Higher output current capability for power-hungry applications

In conclusion, the SDP8601-002 is a highly efficient and versatile power management IC suitable for diverse electronic applications, offering precise control and reliable performance.

[Word Count: 496]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق SDP8601-002 في الحلول التقنية

  1. What is SDP8601-002?

    • SDP8601-002 is a high-performance, low-power digital pressure sensor designed for use in various technical solutions.

  2. What is the operating voltage range of SDP8601-002?

    • The operating voltage range of SDP8601-002 is typically 2.7V to 3.6V.

  3. What is the pressure range that SDP8601-002 can measure?

    • SDP8601-002 can measure pressure within the range of 0 to 100 kPa.

  4. What is the output interface of SDP8601-002?

    • SDP8601-002 features a digital I2C interface for communication with microcontrollers or other devices.

  5. Is SDP8601-002 suitable for battery-powered applications?

    • Yes, SDP8601-002's low-power design makes it suitable for battery-powered applications.

  6. Can SDP8601-002 be used in medical devices?

    • Yes, SDP8601-002 is suitable for use in medical devices such as infusion pumps and respiratory equipment.

  7. What is the accuracy of SDP8601-002?

    • SDP8601-002 offers high accuracy with a typical error of ±1% full scale.

  8. Does SDP8601-002 require calibration?

    • SDP8601-002 comes factory-calibrated, but it may benefit from periodic recalibration depending on the application requirements.

  9. What is the temperature range for operation of SDP8601-002?

    • SDP8601-002 can operate within a temperature range of -20°C to 70°C.

  10. Is SDP8601-002 suitable for industrial automation applications?

    • Yes, SDP8601-002 is well-suited for use in industrial automation applications due to its robust design and performance characteristics.