5P49EE802NDGI8
Product Overview
Category
The 5P49EE802NDGI8 belongs to the category of electronic components.
Use
This product is primarily used in electronic devices for timing and clock synchronization purposes.
Characteristics
- High precision timing capabilities
- Low power consumption
- Compact size
- Wide operating temperature range
Package
The 5P49EE802NDGI8 is available in a small surface mount package, making it suitable for integration into various electronic devices.
Essence
The essence of this product lies in its ability to provide accurate timing signals, ensuring synchronized operation of electronic systems.
Packaging/Quantity
The 5P49EE802NDGI8 is typically packaged in reels or trays, with a quantity of 250 units per reel/tray.
Specifications
- Frequency range: 1 MHz to 200 MHz
- Supply voltage: 2.5 V to 3.3 V
- Output format: LVCMOS
- Operating temperature range: -40°C to +85°C
- Phase noise: < -120 dBc/Hz at 10 kHz offset
Detailed Pin Configuration
The 5P49EE802NDGI8 has the following pin configuration:
- VDD (Power supply)
- GND (Ground)
- OUT (Output signal)
- OE (Output enable)
- SDA (Serial data input)
- SCL (Serial clock input)
Functional Features
- Programmable frequency output
- Integrated crystal oscillator
- I2C interface for configuration
- Spread spectrum modulation support
- Power-down mode for reduced power consumption
Advantages and Disadvantages
Advantages
- High precision timing accuracy
- Flexible frequency programming options
- Low power consumption
- Compact size for easy integration
Disadvantages
- Limited frequency range (1 MHz to 200 MHz)
- Requires external crystal oscillator for operation
Working Principles
The 5P49EE802NDGI8 utilizes a combination of an integrated crystal oscillator and programmable frequency dividers to generate accurate timing signals. The device can be configured through the I2C interface, allowing users to set the desired output frequency.
Detailed Application Field Plans
The 5P49EE802NDGI8 finds applications in various electronic systems that require precise timing synchronization. Some potential application fields include:
- Telecommunications equipment
- Networking devices
- Industrial automation systems
- Consumer electronics
- Automotive electronics
Detailed and Complete Alternative Models
- 5P49V5901 - Similar functionality with extended frequency range
- 5P49V5923 - Higher precision timing capabilities with additional features
- 5P49V5933 - Lower power consumption with reduced frequency range
These alternative models offer similar functionalities to the 5P49EE802NDGI8 but may have different specifications or additional features to cater to specific requirements.
Word count: 346 words
قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق 5P49EE802NDGI8 في الحلول التقنية
Sure! Here are 10 common questions and answers related to the application of 5P49EE802NDGI8 in technical solutions:
Q: What is the 5P49EE802NDGI8? A: The 5P49EE802NDGI8 is a programmable clock generator IC (integrated circuit) used for timing and synchronization in various technical solutions.
Q: What are the key features of the 5P49EE802NDGI8? A: Some key features include multiple outputs, programmable frequencies, low jitter performance, and support for various communication protocols.
Q: How can the 5P49EE802NDGI8 be used in technical solutions? A: It can be used as a clock source for microprocessors, FPGAs, ASICs, and other digital devices that require precise timing signals.
Q: Can the 5P49EE802NDGI8 generate multiple clock frequencies simultaneously? A: Yes, it can generate multiple independent clock frequencies, making it suitable for systems with different components requiring different timing requirements.
Q: Is the 5P49EE802NDGI8 programmable? A: Yes, it is programmable through an I2C interface, allowing users to configure various parameters such as output frequencies, dividers, and phase offsets.
Q: Does the 5P49EE802NDGI8 support any specific communication protocols? A: Yes, it supports popular protocols like I2C, SPI, and SMBus, enabling easy integration into existing systems.
Q: What is the typical power supply voltage range for the 5P49EE802NDGI8? A: The typical power supply voltage range is between 2.375V and 3.63V.
Q: Can the 5P49EE802NDGI8 operate in harsh environments? A: Yes, it has a wide operating temperature range and is designed to withstand industrial-grade conditions.
Q: Are there any evaluation boards or development kits available for the 5P49EE802NDGI8? A: Yes, IDT (Integrated Device Technology) provides evaluation boards and software tools to aid in the development and testing of applications using this IC.
Q: Where can I find more detailed technical information about the 5P49EE802NDGI8? A: You can refer to the datasheet provided by the manufacturer or visit their official website for comprehensive technical documentation and application notes.
Please note that the specific details and answers may vary depending on the manufacturer's specifications and application requirements.