5P49V5913B007NLGI8

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Clock Generator and Jitter Attenuator
• Characteristics: High-performance, low-jitter clock generation and distribution solution
• Package: 20-pin QFN package
• Essence: Provides precise clock signals for various electronic devices
• Packaging/Quantity: Available in reels of 2500 units

Specifications

• Input Voltage Range: 1.8V to 3.3V
• Output Frequency Range: 10MHz to 2.1GHz
• Output Format: LVCMOS, LVDS, HCSL, or CML
• Phase Noise Performance: Excellent phase noise characteristics
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

1. VDDO: Power supply for output drivers
2. GND: Ground reference
3. XIN: Crystal oscillator input
4. XOUT: Crystal oscillator output
5. VDDI: Power supply for internal logic
6. SDA: I2C serial data input/output
7. SCL: I2C serial clock input
8. OE: Output enable control
9. CLK_OUT: Clock output
10. REF_CLK: Reference clock input
11. VDDO: Power supply for output drivers
12. GND: Ground reference
13. NC: No connection
14. NC: No connection
15. NC: No connection
16. NC: No connection
17. NC: No connection
18. NC: No connection
19. NC: No connection
20. NC: No connection

Functional Features

• Clock generation with low jitter and phase noise
• Flexible output format selection
• I2C interface for configuration and control
• Output enable/disable capability
• Wide operating voltage range
• High-performance crystal oscillator input

Advantages and Disadvantages

Advantages

• High-performance clock generation and distribution
• Low jitter and phase noise for improved signal integrity
• Flexible output format options for compatibility with various devices
• Easy configuration and control through I2C interface
• Wide operating voltage range for compatibility with different systems

Disadvantages

• Limited pin configuration options due to fixed pin assignment
• Relatively high power consumption compared to some alternatives
• Requires an external crystal oscillator for operation

Working Principles

The 5P49V5913B007NLGI8 is a clock generator and jitter attenuator IC that generates precise clock signals for electronic devices. It utilizes an internal crystal oscillator or an external reference clock as the input source. The IC then generates multiple clock outputs with low jitter and phase noise, supporting various output formats such as LVCMOS, LVDS, HCSL, or CML. The device can be configured and controlled through the I2C interface, allowing users to adjust parameters like frequency, output format, and output enable/disable settings.

Detailed Application Field Plans

The 5P49V5913B007NLGI8 is widely used in applications where accurate clock signals are crucial, such as: 1. Communication Systems: Provides stable clock signals for data transmission and reception. 2. Networking Equipment: Ensures precise timing synchronization between network devices. 3. Industrial Automation: Synchronizes operations of various components in automated systems. 4. Test and Measurement Instruments: Enables accurate timebase generation for precise measurements. 5. Audio/Video Equipment: Provides synchronized clock signals for audio and video processing.

Detailed and Complete Alternative Models

1. 5P49V5913B008NLGI8: Similar to 5P49V5913B007NLGI8 but with extended temperature range (-40°C to +105°C).
2. 5P49V5913B006NLGI8: Lower-cost alternative with slightly reduced performance specifications.
3. 5P49V5913B009NLGI8: Higher-performance version with improved phase noise characteristics.

(Note: The above alternative models are for illustrative purposes only and may not represent actual products.)

This entry provides an overview of the 5P49V5913B007NLGI8 clock generator and jitter attenuator IC, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.