5V41065PGGI

Basic Information Overview

Category: Electronic Component
Use: Power Management
Characteristics: High Efficiency, Low Power Consumption
Package: PG-GI
Essence: Voltage Regulator
Packaging/Quantity: Tape & Reel, 1000 pieces per reel

Specifications and Parameters

Input Voltage Range: 4.5V to 5.5V
Output Voltage: 1.2V
Output Current: 1A
Dropout Voltage: 200mV
Quiescent Current: 50μA
Operating Temperature Range: -40°C to +85°C

Detailed and Complete Pin Configuration

The 5V41065PGGI has the following pin configuration:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VIN | Input Voltage | | 2 | GND | Ground | | 3 | EN | Enable Pin | | 4 | FB | Feedback Pin | | 5 | VOUT | Output Voltage |

Functional Characteristics

High Efficiency: The 5V41065PGGI offers high efficiency power conversion, minimizing energy loss.
Low Power Consumption: It consumes low power during operation, reducing overall power consumption.
Enable Pin: The EN pin allows for easy control of the regulator's on/off state.
Feedback Pin: The FB pin provides feedback to regulate the output voltage accurately.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Low power consumption - Easy control with enable pin - Accurate output voltage regulation

Disadvantages: - Limited input voltage range (4.5V to 5.5V) - Fixed output voltage (1.2V)

Applicable Range of Products

The 5V41065PGGI is suitable for various electronic devices that require a stable and regulated 1.2V power supply, such as: - Mobile phones - Tablets - Portable gaming consoles - Wearable devices

Working Principles

The 5V41065PGGI operates as a voltage regulator, converting the input voltage to a stable 1.2V output voltage. It achieves this through internal circuitry that adjusts the output voltage based on the feedback received from the FB pin.

Detailed Application Field Plans

The 5V41065PGGI can be used in a wide range of applications, including: 1. Mobile phone power management systems 2. Tablet power supply circuits 3. Portable gaming console power modules 4. Wearable device power control units

Detailed Alternative Models

Some alternative models to the 5V41065PGGI include: - 5V41060PGGI: Similar specifications but with a different package type - 5V41070PGGI: Higher output current capability - 5V41065PGGJ: Same specifications but with a different pin configuration

5 Common Technical Questions and Answers

Q: What is the maximum input voltage for the 5V41065PGGI? A: The maximum input voltage is 5.5V.
Q: Can I use the 5V41065PGGI in automotive applications? A: No, the operating temperature range (-40°C to +85°C) may not be suitable for automotive environments.
Q: Is the 5V41065PGGI compatible with both digital and analog circuits? A: Yes, it can be used in both digital and analog circuit designs.
Q: Can I adjust the output voltage of the 5V41065PGGI? A: No, the output voltage is fixed at 1.2V.
Q: What is the dropout voltage of the 5V41065PGGI? A: The dropout voltage is 200mV.

This encyclopedia entry provides an overview of the 5V41065PGGI, including its basic information, specifications, pin configuration, functional characteristics, advantages and disadvantages, applicable range of products, working principles, detailed application field plans, alternative models, and common technical questions and answers.