5V41066PGG

Basic Information Overview

• Category: Electronic Component
• Use: Power Management
• Characteristics: High Efficiency, Low Power Consumption
• Package: PG-GA
• Essence: Voltage Regulator
• Packaging/Quantity: Tape & Reel / 1000 pieces per reel

Specifications and Parameters

• Input Voltage Range: 4.5V to 5.5V
• Output Voltage: 1.8V
• Output Current: 1A
• Dropout Voltage: 200mV
• Quiescent Current: 50μA
• Operating Temperature Range: -40°C to +85°C

Detailed and Complete Pin Configuration

The 5V41066PGG has the following pin configuration:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VIN | Input Voltage | | 2 | GND | Ground | | 3 | EN | Enable Control | | 4 | FB | Feedback Voltage | | 5 | VOUT | Output Voltage |

Functional Characteristics

• High Efficiency: The 5V41066PGG offers high efficiency power conversion, minimizing energy loss.
• Low Power Consumption: With a quiescent current of only 50μA, it ensures low power consumption during standby mode.
• Enable Control: The EN pin allows for easy on/off control of the voltage regulator.
• Feedback Voltage: The FB pin provides feedback to regulate the output voltage accurately.
• Overcurrent Protection: The 5V41066PGG incorporates overcurrent protection to safeguard connected devices.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Low power consumption - Enable control for easy on/off operation - Overcurrent protection

Disadvantages: - Limited input voltage range (4.5V to 5.5V) - Fixed output voltage (1.8V)

Applicable Range of Products

The 5V41066PGG is suitable for various electronic devices that require a stable and efficient power supply, such as: - Mobile phones - Tablets - Portable media players - Wearable devices

Working Principles

The 5V41066PGG operates as a voltage regulator, converting the input voltage to a stable output voltage of 1.8V. It achieves this through feedback control, adjusting the internal circuitry to maintain the desired output voltage despite changes in input voltage or load conditions.

Detailed Application Field Plans

The 5V41066PGG can be used in a wide range of applications, including: 1. Mobile phone power management systems 2. Tablet power supply circuits 3. Portable media player voltage regulation 4. Wearable device power management 5. Battery-powered IoT devices

Detailed Alternative Models

Some alternative models to the 5V41066PGG include: - 5V41067PGG - 5V41068PGG - 5V41069PGG - 5V41070PGG - 5V41071PGG

5 Common Technical Questions and Answers

1. Q: What is the maximum input voltage for the 5V41066PGG? A: The maximum input voltage is 5.5V.

2. Q: Can the 5V41066PGG handle higher output currents? A: No, the maximum output current is limited to 1A.

3. Q: Does the 5V41066PGG have thermal protection? A: Yes, it incorporates thermal protection to prevent overheating.

4. Q: Can I use the 5V41066PGG in automotive applications? A: No, it is not recommended for automotive use due to the specified operating temperature range.

5. Q: Is the 5V41066PGG RoHS compliant? A: Yes, it is compliant with the Restriction of Hazardous Substances directive.

This encyclopedia entry provides a comprehensive overview of the 5V41066PGG voltage regulator, including its basic information, specifications, pin configuration, functional characteristics, advantages and disadvantages, applicable range of products, working principles, detailed application field plans, alternative models, and common technical questions and answers.