82V3010PVG8

Overview

• Category: Electronic Component
• Use: Power Management
• Characteristics: High Efficiency, Low Power Consumption
• Package: PVG8 (Plastic Very Thin Quad Flat No-Lead)
• Essence: Voltage Regulator
• Packaging/Quantity: Tape & Reel / 3000 units per reel

Specifications and Parameters

• Input Voltage Range: 4.5V to 28V
• Output Voltage Range: 0.6V to 5.5V
• Output Current: Up to 3A
• Quiescent Current: 40µA (typical)
• Switching Frequency: 1.2MHz
• Operating Temperature Range: -40°C to +85°C

Pin Configuration

The 82V3010PVG8 has a total of 16 pins. The detailed pin configuration is as follows:

1. VIN: Input Voltage
2. GND: Ground
3. EN: Enable Pin
4. FB: Feedback Pin
5. SS/TR: Soft-Start/Tracking Pin
6. PGND: Power Ground
7. SW: Switch Node
8. SW: Switch Node
9. SW: Switch Node
10. SW: Switch Node
11. VOUT: Output Voltage
12. VOUT: Output Voltage
13. VOUT: Output Voltage
14. VOUT: Output Voltage
15. PGND: Power Ground
16. PGND: Power Ground

Functional Characteristics

• High Efficiency: The 82V3010PVG8 offers high efficiency power conversion, minimizing energy loss.
• Low Power Consumption: With a quiescent current of only 40µA, the device ensures low power consumption during standby or light load conditions.
• Fast Transient Response: The voltage regulator provides a fast and stable response to sudden changes in load current.
• Overcurrent Protection: The device incorporates overcurrent protection to safeguard against excessive current flow.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Low power consumption - Fast transient response - Overcurrent protection

Disadvantages: - Limited input voltage range (4.5V to 28V) - Limited output voltage range (0.6V to 5.5V)

Applicable Range of Products

The 82V3010PVG8 is suitable for a wide range of applications, including but not limited to: - Portable electronic devices - Industrial equipment - Automotive systems - Communication devices

Working Principles

The 82V3010PVG8 operates as a voltage regulator, converting the input voltage to a regulated output voltage. It utilizes a switching mechanism to efficiently control the output voltage based on the feedback received from the FB pin.

Detailed Application Field Plans

The 82V3010PVG8 can be applied in various fields, such as: 1. Mobile Phones: Power management for battery charging and voltage regulation. 2. LED Lighting: Efficiently regulate the voltage for LED drivers. 3. Automotive Electronics: Power supply for various automotive systems. 4. Industrial Automation: Voltage regulation for control systems. 5. Consumer Electronics: Power management for portable devices.

Detailed Alternative Models

Some alternative models to the 82V3010PVG8 include: - 82V3010PVH8 - 82V3010PVE8 - 82V3010PVS8

5 Common Technical Questions and Answers

1. Q: What is the maximum output current of the 82V3010PVG8? A: The device can provide an output current of up to 3A.

2. Q: What is the operating temperature range of the 82V3010PVG8? A: The device can operate within a temperature range of -40°C to +85°C.

3. Q: Does the 82V3010PVG8 have overcurrent protection? A: Yes, the device incorporates overcurrent protection to prevent excessive current flow.

4. Q: What is the input voltage range of the 82V3010PVG8? A: The device accepts an input voltage range from 4.5V to 28V.

5. Q: What is the package type of the 82V3010PVG8? A: The device is packaged in PVG8 (Plastic Very Thin Quad Flat No-Lead) package.

This encyclopedia entry provides an overview of the 82V3010PVG8, including its basic information, specifications, pin configuration, functional characteristics, advantages and disadvantages, applicable range of products, working principles, detailed application field plans, alternative models, and common technical questions and answers.