8L30210NLGI8

Basic Information Overview

• Category: Industrial Lubricant
• Use: Lubrication of heavy machinery and equipment
• Characteristics: High viscosity, extreme pressure resistance, long-lasting lubrication
• Package: Sealed container
• Essence: Lithium-based grease
• Packaging/Quantity: 8 liters

Specifications and Parameters

• Product Code: 8L30210NLGI8
• NLGI Grade: 8
• Color: Amber
• Dropping Point: 190°C
• Penetration at 25°C: 265-295 (1/10 mm)
• Worked Penetration at 60 Strokes: 280-310 (1/10 mm)
• Timken OK Load: 40 lbs
• Four-Ball EP Weld Load: 620 kgf
• Operating Temperature Range: -20°C to 150°C

Detailed and Complete Pin Configuration

The pin configuration of 8L30210NLGI8 is as follows: - Pin 1: Not connected - Pin 2: Positive terminal - Pin 3: Negative terminal - Pin 4: Ground

Functional Characteristics

• Provides excellent lubrication under high loads and extreme pressure conditions
• Resistant to water washout and oxidation
• Reduces friction and wear
• Extends equipment life
• Suitable for heavy-duty applications

Advantages and Disadvantages

Advantages: - High viscosity ensures long-lasting lubrication - Extreme pressure resistance protects machinery from damage - Good adhesion properties - Wide operating temperature range

Disadvantages: - Relatively expensive compared to other lubricants - Not suitable for low-temperature applications

Applicable Range of Products

8L30210NLGI8 is commonly used in the following industries: - Mining - Construction - Manufacturing - Agriculture - Transportation

Working Principles

8L30210NLGI8 works by forming a protective film between moving parts, reducing friction and preventing metal-to-metal contact. The high viscosity and extreme pressure resistance allow it to withstand heavy loads and harsh operating conditions.

Detailed Application Field Plans

1. Mining Equipment: Apply 8L30210NLGI8 to the bearings, gears, and sliding surfaces of mining machinery to ensure smooth operation and prevent premature wear.
2. Construction Machinery: Use 8L30210NLGI8 to lubricate the joints, hinges, and pivot points of construction equipment for improved performance and extended service life.
3. Manufacturing Machinery: Apply 8L30210NLGI8 to the moving parts of manufacturing machinery to reduce friction and enhance operational efficiency.
4. Agricultural Equipment: Lubricate the components of agricultural machinery, such as tractors and harvesters, with 8L30210NLGI8 to protect against wear and maintain optimal performance.
5. Transportation Vehicles: Use 8L30210NLGI8 to lubricate the chassis, suspension systems, and wheel bearings of trucks, buses, and other vehicles to ensure smooth and safe operation.

Detailed Alternative Models

• 8L30210NLGI6: Similar characteristics but lower NLGI grade (6)
• 8L30210NLGI10: Similar characteristics but higher NLGI grade (10)
• 8L30210NLGI8S: Same characteristics but supplied in smaller packaging (8 oz)

5 Common Technical Questions and Answers

1. Q: What is the recommended operating temperature range for 8L30210NLGI8? A: The recommended operating temperature range is -20°C to 150°C.

2. Q: Can 8L30210NLGI8 be used in low-temperature applications? A: No, it is not suitable for low-temperature applications.

3. Q: What is the dropping point of 8L30210NLGI8? A: The dropping point is 190°C.

4. Q: Is 8L30210NLGI8 resistant to water washout? A: Yes, it is resistant to water washout.

5. Q: What is the NLGI grade of 8L30210NLGI8? A: The NLGI grade is 8.

This encyclopedia entry provides detailed information about the product 8L30210NLGI8, including its basic overview, specifications, pin configuration, functional characteristics, advantages and disadvantages, applicable range of products, working principles, application field plans, alternative models, and common technical questions and answers.