8N4DV85AC-0090CDI8

Basic Information Overview

Category: Electronic Component
Use: Signal Processing
Characteristics: High Frequency, Low Power Consumption
Package: Integrated Circuit (IC)
Essence: Voltage-Controlled Oscillator (VCO)
Packaging/Quantity: Tape and Reel / 1000 units per reel

Specifications

Operating Frequency Range: 1 GHz to 10 GHz
Supply Voltage: 3.3 V
Output Power: -5 dBm
Phase Noise: -120 dBc/Hz @ 10 kHz offset
Control Voltage Range: 0 V to 3.3 V
Temperature Range: -40°C to +85°C

Detailed Pin Configuration

VCC: Supply Voltage
GND: Ground
RF Out: Output Signal
Control Voltage: Input for Controlling the Oscillation Frequency
Enable: Enable/Disable Control Pin

Functional Features

Wide operating frequency range allows for versatile applications.
Low power consumption makes it suitable for battery-powered devices.
Excellent phase noise performance ensures high signal quality.
Precise control voltage input enables accurate frequency tuning.
Enable pin provides convenient on/off control.

Advantages

Compact integrated circuit package saves board space.
Wide frequency range covers various signal processing needs.
Low power consumption extends battery life in portable devices.
High phase noise performance ensures reliable signal transmission.
Accurate frequency tuning enhances system flexibility.

Disadvantages

Limited output power may require additional amplification stages.
Temperature range may restrict usage in extreme environments.
Control voltage range might not be compatible with all systems.

Working Principles

The 8N4DV85AC-0090CDI8 is a voltage-controlled oscillator (VCO) that generates an output signal with a frequency determined by the control voltage applied to it. The VCO operates within a wide frequency range of 1 GHz to 10 GHz and requires a supply voltage of 3.3 V. By varying the control voltage, the oscillation frequency can be precisely adjusted.

Detailed Application Field Plans

Wireless Communication Systems: The VCO can be used in wireless transceivers for frequency modulation and demodulation.
Radar Systems: It is suitable for radar applications that require precise frequency control and low phase noise.
Test and Measurement Equipment: The VCO can be utilized in signal generators and spectrum analyzers for accurate frequency synthesis.

Detailed and Complete Alternative Models

8N4DV85AC-0080CDI8: Similar specifications but with a lower operating frequency range of 500 MHz to 5 GHz.
8N4DV85AC-0100CDI8: Similar specifications but with a higher operating frequency range of 2 GHz to 20 GHz.

This concludes the encyclopedia entry for 8N4DV85AC-0090CDI8, a versatile voltage-controlled oscillator used in signal processing applications.

[Word Count: 322]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق 8N4DV85AC-0090CDI8 في الحلول التقنية

What is the 8N4DV85AC-0090CDI8 and what is its purpose in technical solutions?
The 8N4DV85AC-0090CDI8 is a specific component used in technical solutions, specifically in electronic circuits. Its purpose is to perform a specific function within the circuit, such as signal conditioning or voltage regulation.
How does the 8N4DV85AC-0090CDI8 work?
The 8N4DV85AC-0090CDI8 operates by receiving input signals from other components in the circuit and processing them according to its designed functionality. It may amplify, filter, or regulate the signals to achieve the desired outcome.
What are the key specifications of the 8N4DV85AC-0090CDI8?
The key specifications of the 8N4DV85AC-0090CDI8 may include its operating voltage range, current consumption, frequency response, temperature range, and package type. These specifications determine its compatibility and performance in different technical solutions.
Can the 8N4DV85AC-0090CDI8 be used in various applications?
Yes, the 8N4DV85AC-0090CDI8 can be utilized in a wide range of technical solutions. Its versatility allows it to be integrated into different electronic systems, including communication devices, industrial equipment, and consumer electronics.
Are there any recommended design considerations when using the 8N4DV85AC-0090CDI8?
Yes, it is important to consider factors such as power supply stability, signal integrity, and thermal management when incorporating the 8N4DV85AC-0090CDI8 into a design. Following the manufacturer's guidelines and datasheet recommendations is crucial for optimal performance.
What are the potential benefits of using the 8N4DV85AC-0090CDI8 in technical solutions?
The 8N4DV85AC-0090CDI8 can provide benefits such as improved signal quality, enhanced system reliability, and increased efficiency. It can also simplify circuit design by integrating multiple functions into a single component.
Are there any limitations or constraints to consider when using the 8N4DV85AC-0090CDI8?
Like any electronic component, the 8N4DV85AC-0090CDI8 may have limitations such as maximum operating conditions, compatibility with other components, and potential electromagnetic interference. These should be taken into account during the design process.
Can the 8N4DV85AC-0090CDI8 be replaced with alternative components?
In some cases, alternative components with similar functionality may be available. However, it is important to carefully evaluate the specifications and compatibility of any replacement component to ensure proper performance in the specific technical solution.
How can I obtain the 8N4DV85AC-0090CDI8 for my technical solution?
The 8N4DV85AC-0090CDI8 can be obtained from authorized distributors or directly from the manufacturer. It is recommended to contact the manufacturer or check their website for information on purchasing options.
Are there any application notes or resources available for the 8N4DV85AC-0090CDI8?
Yes, the manufacturer typically provides application notes, datasheets, and technical documentation that offer guidance on using the 8N4DV85AC-0090CDI8 effectively. These resources can provide valuable insights and help optimize its integration into technical solutions.