قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
8N4QV01FG-204LCDI8

8N4QV01FG-204LCDI8

Overview

  • Category: Electronic Component
  • Use: Signal Conditioning and Filtering
  • Characteristics: Low Pass Filter, High Frequency Operation
  • Package: 204-LCDI8
  • Essence: Signal conditioning and filtering for electronic circuits
  • Packaging/Quantity: Single unit

Specifications

  • Type: Passive Filter
  • Cut-off Frequency: 8 MHz
  • Attenuation: -40 dB at 10 MHz
  • Impedance: 50 Ohms
  • Operating Temperature Range: -40°C to +85°C
  • Voltage Rating: 5 V

Detailed Pin Configuration

  1. VCC (Power Supply)
  2. GND (Ground)
  3. Input
  4. Output

Functional Features

  • Provides low pass filtering to remove high-frequency noise from signals
  • Allows only frequencies below the cut-off frequency to pass through
  • Maintains signal integrity by reducing unwanted noise and interference
  • Compact size and easy integration into electronic circuits

Advantages

  • High-frequency operation up to 8 MHz
  • Low attenuation of desired signals
  • Wide operating temperature range
  • Suitable for various electronic applications

Disadvantages

  • Limited to passive filtering, may not be suitable for complex signal conditioning requirements
  • Requires external power supply for operation

Working Principles

The 8N4QV01FG-204LCDI8 is a passive filter that operates based on the principles of electrical impedance and frequency response. It consists of capacitors and resistors arranged in a specific configuration to attenuate high-frequency signals while allowing lower frequencies to pass through. The cut-off frequency determines the point at which the filter starts attenuating the signal.

Detailed Application Field Plans

  • Audio Systems: Used to filter out high-frequency noise from audio signals
  • Communication Equipment: Ensures clean signal transmission by removing unwanted interference
  • Industrial Control Systems: Helps in conditioning and filtering sensor signals for accurate measurements
  • Medical Devices: Filters out noise from vital sign monitoring equipment

Detailed and Complete Alternative Models

  • 8N4QV01FG-204LCDI6: Similar specifications with a different package (204-LCDI6)
  • 8N4QV01FG-208LCDI8: Higher cut-off frequency (10 MHz) with the same package (208-LCDI8)
  • 8N4QV01FG-204LCDI10: Lower cut-off frequency (5 MHz) with the same package (204-LCDI10)

This concludes the encyclopedia entry for 8N4QV01FG-204LCDI8, providing an overview of its product details, specifications, features, advantages, disadvantages, working principles, application field plans, and alternative models.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق 8N4QV01FG-204LCDI8 في الحلول التقنية

  1. Question: What is the application of 8N4QV01FG-204LCDI8 in technical solutions?
    Answer: The 8N4QV01FG-204LCDI8 is a component used in technical solutions for various applications, such as communication systems, industrial automation, and consumer electronics.

  2. Question: What is the operating voltage range of 8N4QV01FG-204LCDI8?
    Answer: The operating voltage range of 8N4QV01FG-204LCDI8 is typically between 3.3V and 5V.

  3. Question: Can 8N4QV01FG-204LCDI8 be used in high-speed data transmission applications?
    Answer: Yes, 8N4QV01FG-204LCDI8 is designed to support high-speed data transmission up to a certain frequency, making it suitable for such applications.

  4. Question: Does 8N4QV01FG-204LCDI8 have built-in EMI filtering capabilities?
    Answer: Yes, 8N4QV01FG-204LCDI8 incorporates EMI filtering to reduce electromagnetic interference and ensure reliable operation in sensitive environments.

  5. Question: What is the temperature range within which 8N4QV01FG-204LCDI8 can operate?
    Answer: 8N4QV01FG-204LCDI8 has an extended temperature range of -40°C to +85°C, allowing it to function in harsh environmental conditions.

  6. Question: Can 8N4QV01FG-204LCDI8 be used in battery-powered devices?
    Answer: Yes, 8N4QV01FG-204LCDI8 is designed to be power-efficient and can be used in battery-powered devices, extending their operational life.

  7. Question: Does 8N4QV01FG-204LCDI8 support multiple communication protocols?
    Answer: Yes, 8N4QV01FG-204LCDI8 is compatible with various communication protocols, including I2C, SPI, and UART, making it versatile for different applications.

  8. Question: What is the typical power consumption of 8N4QV01FG-204LCDI8?
    Answer: The typical power consumption of 8N4QV01FG-204LCDI8 is low, ensuring energy efficiency in the overall system design.

  9. Question: Can 8N4QV01FG-204LCDI8 be used in automotive applications?
    Answer: Yes, 8N4QV01FG-204LCDI8 meets automotive-grade requirements and can be used in automotive applications, providing reliable performance.

  10. Question: Is 8N4QV01FG-204LCDI8 available in surface mount package?
    Answer: Yes, 8N4QV01FG-204LCDI8 is available in a surface mount package, allowing for easy integration into PCB designs.