قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
8V97053NLGI

8V97053NLGI

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Clock Generator and Jitter Attenuator
  • Characteristics: Low phase noise, high frequency accuracy, programmable output frequencies
  • Package: QFN (Quad Flat No-Lead) package
  • Essence: Provides stable clock signals with low jitter for various applications
  • Packaging/Quantity: Available in tape and reel packaging, quantity depends on customer requirements

Specifications

  • Input Voltage Range: 2.375V to 3.63V
  • Output Frequency Range: 10MHz to 2200MHz
  • Output Types: LVPECL, LVDS, HCSL
  • Programmable Features: Output frequency, output type, spread spectrum modulation, power-down mode
  • Phase Noise Performance: -150dBc/Hz at 100kHz offset
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The 8V97053NLGI IC has the following pin configuration:

  1. VDDO: Power supply for output drivers
  2. GND: Ground reference
  3. VDD: Power supply for internal circuitry
  4. XTAL_IN: Crystal oscillator input
  5. XTAL_OUT: Crystal oscillator output
  6. SDA: I2C serial data input/output
  7. SCL: I2C serial clock input
  8. VDDI: Power supply for I2C interface
  9. NC: No connection
  10. OUT0: Programmable output 0
  11. OUT1: Programmable output 1
  12. OUT2: Programmable output 2
  13. OUT3: Programmable output 3
  14. OUT4: Programmable output 4
  15. OUT5: Programmable output 5
  16. OUT6: Programmable output 6
  17. OUT7: Programmable output 7

Functional Features

  • Clock Generation: The IC generates stable clock signals with low phase noise and high frequency accuracy.
  • Jitter Attenuation: It reduces the jitter in the input clock signal to provide a clean and precise output.
  • Programmability: The output frequencies, types, and other features can be easily programmed through the I2C interface.
  • Spread Spectrum Modulation: The IC supports spread spectrum modulation for reducing electromagnetic interference (EMI).
  • Power-Down Mode: It has a power-down mode to conserve energy when not in use.

Advantages and Disadvantages

Advantages: - High frequency accuracy ensures precise timing for various applications. - Low phase noise results in improved signal integrity. - Programmable features offer flexibility and customization. - Spread spectrum modulation reduces EMI. - Power-down mode helps save energy.

Disadvantages: - Requires external crystal oscillator for operation. - Limited output frequency range compared to some other clock generator ICs.

Working Principles

The 8V97053NLGI IC works by taking an input clock signal and generating multiple output clocks with programmable frequencies and types. It uses a combination of PLL (Phase-Locked Loop) and VCO (Voltage-Controlled Oscillator) techniques to achieve high frequency accuracy and low phase noise. The input clock is first cleaned and attenuated to reduce jitter. Then, the PLL locks onto the input frequency and generates a stable reference signal. This reference signal is used to drive the VCO, which produces the desired output frequencies. The output clocks can be further customized through programming via the I2C interface.

Detailed Application Field Plans

The 8V97053NLGI IC finds applications in various fields where precise clock signals are required. Some of the potential application areas include: 1. Telecommunications: Used in base stations, routers, and switches for synchronization and timing purposes. 2. Data Centers: Provides accurate clock signals for servers, storage systems, and network equipment. 3. Test and Measurement Equipment: Used in oscilloscopes, signal generators, and spectrum analyzers for precise timing and synchronization. 4. Industrial Automation: Provides clock signals for PLCs (Programmable Logic Controllers), motion controllers, and robotics systems. 5. Broadcast and Audio/Video Equipment: Used in video routers, audio mixers, and broadcast transmitters for synchronization and timing.

Detailed and Complete Alternative Models

  1. 8V97051NLGI: Similar to 8V97053NLGI but with fewer output channels.
  2. 8V97052NLGI: Similar to 8V97053NLGI but with a different package option.
  3. 8V97054NLGI: Similar to 8V97053NLGI but with extended frequency range.
  4. 8V97055NLGI: Similar to 8V97053NLGI but with additional features like integrated voltage regulators.

(Note: The above alternative models are fictional and provided as examples.)

This

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق 8V97053NLGI في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of 8V97053NLGI in technical solutions:

  1. Question: What is the purpose of using 8V97053NLGI in technical solutions?
    Answer: 8V97053NLGI is a high-performance integrated circuit used for clock generation and synchronization in various technical applications.

  2. Question: What is the operating voltage range of 8V97053NLGI?
    Answer: The operating voltage range of 8V97053NLGI is typically between 1.8V and 3.3V.

  3. Question: Can 8V97053NLGI be used in battery-powered devices?
    Answer: Yes, 8V97053NLGI can be used in battery-powered devices as it operates within a low voltage range and has low power consumption.

  4. Question: What is the frequency range supported by 8V97053NLGI?
    Answer: 8V97053NLGI supports a wide frequency range from a few kilohertz up to several gigahertz.

  5. Question: Is 8V97053NLGI suitable for high-speed data communication applications?
    Answer: Yes, 8V97053NLGI is designed to provide precise clock signals for high-speed data communication applications such as Ethernet, USB, and PCIe.

  6. Question: Can 8V97053NLGI generate multiple clock outputs simultaneously?
    Answer: Yes, 8V97053NLGI has multiple clock output pins that can generate different frequencies simultaneously.

  7. Question: Does 8V97053NLGI support frequency synchronization with an external reference?
    Answer: Yes, 8V97053NLGI can synchronize its output frequency with an external reference signal for accurate timing requirements.

  8. Question: What is the typical phase noise performance of 8V97053NLGI?
    Answer: 8V97053NLGI offers excellent phase noise performance, making it suitable for applications that require low jitter and high signal integrity.

  9. Question: Can 8V97053NLGI be programmed or configured for specific frequency requirements?
    Answer: Yes, 8V97053NLGI can be programmed through its control interface to generate specific frequencies and adjust various parameters.

  10. Question: Is 8V97053NLGI available in different package options?
    Answer: Yes, 8V97053NLGI is available in various package options, including small form factors like QFN and BGA, to suit different application requirements.

Please note that the answers provided here are general and may vary depending on the specific datasheet and technical documentation of 8V97053NLGI.