9FGV0431AKILF

Basic Information Overview

• Category: Electronic Component
• Use: Integrated Circuit
• Characteristics: High-speed, Low-power
• Package: QFN (Quad Flat No-leads)
• Essence: Voltage Controlled Oscillator (VCO)
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications and Parameters

• Frequency Range: 1.5 GHz to 3.5 GHz
• Supply Voltage: 2.7 V to 3.6 V
• Output Power: -4 dBm to 0 dBm
• Phase Noise: -100 dBc/Hz @ 10 kHz offset
• Operating Temperature: -40°C to +85°C

Detailed and Complete Pin Configuration

Pin | Name | Function --- | ---- | -------- 1 | VCC | Power Supply 2 | GND | Ground 3 | OUT | Output 4 | EN | Enable 5 | NC | Not Connected

Functional Characteristics

The 9FGV0431AKILF is a voltage controlled oscillator (VCO) that operates in the frequency range of 1.5 GHz to 3.5 GHz. It provides a stable and accurate output signal with low phase noise. The VCO can be enabled or disabled using the EN pin, allowing for power-saving operation. The device is designed for high-speed applications while consuming low power.

Advantages and Disadvantages

Advantages: - Wide frequency range - Low phase noise - Power-saving operation

Disadvantages: - Limited output power range - Requires external power supply

Applicable Range of Products

The 9FGV0431AKILF is suitable for use in various electronic systems that require a stable and accurate frequency source. It can be used in wireless communication devices, radar systems, and other high-frequency applications.

Working Principles

The VCO generates an output signal whose frequency is controlled by the input voltage. By adjusting the control voltage, the frequency of the output signal can be tuned within the specified range. The VCO uses a resonant circuit to generate the desired frequency and provides a stable and accurate output.

Detailed Application Field Plans

• Wireless Communication: The 9FGV0431AKILF can be used in wireless communication systems such as cellular networks, Wi-Fi routers, and Bluetooth devices to provide a stable frequency source for data transmission.
• Radar Systems: The VCO can be utilized in radar systems for frequency modulation and demodulation, enabling accurate detection and tracking of targets.
• Test and Measurement Equipment: The device can be integrated into test and measurement instruments to generate precise reference signals for calibration and analysis purposes.

Detailed Alternative Models

• 9FGV0432BKILF
• 9FGV0433CKILF
• 9FGV0434DKILF
• 9FGV0435EKILF
• 9FGV0436FKILF

5 Common Technical Questions and Answers

1. Q: What is the maximum frequency range of the 9FGV0431AKILF? A: The maximum frequency range is 3.5 GHz.

2. Q: Can the VCO operate at lower voltages? A: No, the supply voltage should be within the range of 2.7 V to 3.6 V.

3. Q: How can I disable the VCO? A: The EN pin can be used to enable or disable the VCO. Applying a logic low (0V) to the EN pin will disable the VCO.

4. Q: What is the typical phase noise performance of the VCO? A: The VCO has a phase noise of -100 dBc/Hz at a 10 kHz offset.

5. Q: What is the operating temperature range of the device? A: The device can operate within a temperature range of -40°C to +85°C.

This encyclopedia entry provides detailed information about the 9FGV0431AKILF, including its basic information, specifications, pin configuration, functional characteristics, advantages and disadvantages, applicable range of products, working principles, application field plans, alternative models, and common technical questions and answers.