IDT49FCT806SO8
Overview
- Category: Integrated Circuit
- Use: Digital Logic
- Characteristics: High-speed, Low-power
- Package: SOIC-8
- Essence: Flip-Flop
- Packaging/Quantity: Tape & Reel, 2500 units per reel
Specifications and Parameters
- Supply Voltage: 3.3V
- Input Voltage: 0V to VCC
- Output Voltage: 0V to VCC
- Operating Temperature: -40°C to +85°C
- Propagation Delay: 2.5ns (typical)
- Output Drive: ±24mA
Pin Configuration
The IDT49FCT806SO8 has the following pin configuration:
- CLK (Clock Input)
- D (Data Input)
- Q (Output)
- GND (Ground)
- NC (No Connection)
- NC (No Connection)
- VCC (Power Supply)
- OE (Output Enable)
Functional Characteristics
The IDT49FCT806SO8 is a high-speed, low-power flip-flop integrated circuit. It operates on a 3.3V supply voltage and provides a clocked storage element with a data input and an output. The flip-flop can be enabled or disabled using the output enable pin.
Advantages and Disadvantages
Advantages: - High-speed operation - Low power consumption - Small package size
Disadvantages: - Limited operating temperature range - Limited output drive capability
Applicable Range of Products
The IDT49FCT806SO8 is commonly used in digital logic applications that require high-speed and low-power operation. It is suitable for use in various electronic devices such as computers, communication equipment, and consumer electronics.
Working Principles
The IDT49FCT806SO8 operates based on the principles of flip-flop logic. It stores and outputs data based on the clock input signal. The output can be enabled or disabled using the output enable pin.
Detailed Application Field Plans
The IDT49FCT806SO8 can be used in various applications, including: 1. Data storage and retrieval systems 2. Digital signal processing 3. Memory modules 4. Microcontrollers 5. Networking equipment
Detailed Alternative Models
Some alternative models to the IDT49FCT806SO8 include: - SN74LVC1G175DBVR - MC74HC175ADR2G - CD40175BE
5 Common Technical Questions and Answers
Q: What is the maximum operating temperature of the IDT49FCT806SO8? A: The maximum operating temperature is +85°C.
Q: Can the IDT49FCT806SO8 operate on a 5V supply voltage? A: No, it operates on a 3.3V supply voltage.
Q: What is the typical propagation delay of the IDT49FCT806SO8? A: The typical propagation delay is 2.5ns.
Q: Can the IDT49FCT806SO8 drive high-current loads? A: No, it has a limited output drive capability of ±24mA.
Q: What is the package type of the IDT49FCT806SO8? A: It comes in an SOIC-8 package.
This encyclopedia entry provides an overview of the IDT49FCT806SO8 integrated circuit, including its basic information, specifications, pin configuration, functional characteristics, advantages and disadvantages, applicable range of products, working principles, detailed application field plans, alternative models, and common technical questions and answers.