IDT, Integrated Device Technology Inc
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
IDT5V927PGGI
عرض التفاصيل جداول البيانات

IDT5V927PGGI

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Level Translator
  • Characteristics: Bi-directional, non-inverting, 8-bit level shifter
  • Package: TSSOP-20
  • Essence: Translates voltage levels between two different logic families
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 1.2V to 3.6V
  • Logic Voltage Range: 1.65V to 5.5V
  • Maximum Data Rate: 100 Mbps
  • Number of Channels: 8
  • Input/Output Capacitance: 4 pF
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The IDT5V927PGGI has a total of 20 pins, which are arranged as follows:

Pin 1: OE (Output Enable) Pin 2: A1 (Channel A Control Input) Pin 3: B1 (Channel B Control Input) Pin 4: GND (Ground) Pin 5: A2 (Channel A Data Input/Output) Pin 6: B2 (Channel B Data Input/Output) Pin 7: VCCA (Channel A Supply Voltage) Pin 8: VCCB (Channel B Supply Voltage) Pin 9: NC (No Connection) Pin 10: NC (No Connection) Pin 11: NC (No Connection) Pin 12: NC (No Connection) Pin 13: NC (No Connection) Pin 14: NC (No Connection) Pin 15: NC (No Connection) Pin 16: NC (No Connection) Pin 17: NC (No Connection) Pin 18: NC (No Connection) Pin 19: NC (No Connection) Pin 20: VCC (Supply Voltage)

Functional Features

  • Bi-directional voltage level translation between two logic families
  • Non-inverting translation with no direction control required
  • Supports bidirectional data flow
  • Low power consumption
  • High-speed operation

Advantages and Disadvantages

Advantages: - Wide supply voltage range allows compatibility with various systems - Non-inverting translation simplifies circuit design - Supports high-speed data transmission

Disadvantages: - Limited number of channels (8 channels) - Relatively small package size may require careful handling during assembly

Working Principles

The IDT5V927PGGI is a voltage level translator that enables communication between two different logic families. It operates by converting the input logic levels from one voltage domain to the corresponding levels in the other voltage domain. The device uses a combination of level shifting circuits and bi-directional buffers to achieve this translation.

Detailed Application Field Plans

The IDT5V927PGGI is commonly used in applications where voltage level translation is required between different logic families. Some typical application fields include: - Microcontroller interfacing - Communication interfaces (UART, SPI, I2C) - Sensor networks - Industrial automation - Consumer electronics

Detailed and Complete Alternative Models

  • SN74LV1T34DBVR
  • PCA9306DCUR
  • TXB0108PWR
  • NC7SZ125P5X
  • 74LVC245APW

These alternative models offer similar functionality and can be considered as substitutes for the IDT5V927PGGI in voltage level translation applications.

Word count: 328 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق IDT5V927PGGI في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of IDT5V927PGGI in technical solutions:

  1. Q: What is IDT5V927PGGI? A: IDT5V927PGGI is a specific integrated circuit (IC) designed for voltage level translation applications.

  2. Q: What is the voltage range supported by IDT5V927PGGI? A: IDT5V927PGGI supports voltage level translation between 1.2V and 3.3V.

  3. Q: Can IDT5V927PGGI be used bidirectionally? A: Yes, IDT5V927PGGI can perform bidirectional voltage level translation.

  4. Q: What is the maximum data rate supported by IDT5V927PGGI? A: IDT5V927PGGI supports data rates up to 100 Mbps.

  5. Q: Is IDT5V927PGGI compatible with I2C and SPI interfaces? A: Yes, IDT5V927PGGI is compatible with both I2C and SPI interfaces.

  6. Q: Does IDT5V927PGGI require external power supply? A: Yes, IDT5V927PGGI requires an external power supply for operation.

  7. Q: Can IDT5V927PGGI handle level shifting for multiple channels simultaneously? A: Yes, IDT5V927PGGI can handle level shifting for up to 8 channels simultaneously.

  8. Q: What is the operating temperature range of IDT5V927PGGI? A: IDT5V927PGGI has an operating temperature range of -40°C to +85°C.

  9. Q: Does IDT5V927PGGI have any built-in ESD protection? A: Yes, IDT5V927PGGI has built-in ESD protection to ensure robustness.

  10. Q: Can IDT5V927PGGI be used in automotive applications? A: Yes, IDT5V927PGGI is suitable for automotive applications and meets the required standards.

Please note that these answers are general and may vary depending on the specific application and requirements.