BAR 95-02LS E6327
Product Category: Integrated Circuit
Basic Information Overview: - Category: Linear Voltage Regulator - Use: To regulate voltage in electronic circuits - Characteristics: Low dropout, low noise, high accuracy - Package: TO-220, TO-263 - Essence: Stabilizing voltage for sensitive electronic components - Packaging/Quantity: Typically sold in reels of 250 or 500 units
Specifications: - Input Voltage Range: 4.5V to 26V - Output Voltage Range: 1.25V to 20V - Dropout Voltage: 0.45V at 1A - Line Regulation: 0.2% max - Load Regulation: 0.4% max - Quiescent Current: 5mA - Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration: - Pin 1: Input Voltage (VIN) - Pin 2: Ground (GND) - Pin 3: Output Voltage (VOUT)
Functional Features: - Low dropout voltage - Thermal shutdown and current limit protection - High PSRR (Power Supply Rejection Ratio) - Adjustable output voltage with external resistors
Advantages: - Wide input voltage range - Low dropout voltage - Good thermal performance - High accuracy and low noise
Disadvantages: - Higher quiescent current compared to some competitors - Limited maximum output current
Working Principles: The BAR 95-02LS E6327 operates by comparing the output voltage to a reference voltage and adjusting the pass element to maintain a stable output voltage despite changes in input voltage and load.
Detailed Application Field Plans: - Automotive electronics - Industrial control systems - Portable electronic devices - Power management modules
Detailed and Complete Alternative Models: - LM317 - LM1117 - LT1086
This linear voltage regulator is widely used in various electronic applications due to its reliable performance and ease of use.
[Word Count: 281]
قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق BAR 95-02LS E6327 في الحلول التقنية
What is BAR 95-02LS E6327?
- BAR 95-02LS E6327 is a high-performance epoxy resin system commonly used in technical solutions for its excellent adhesion, chemical resistance, and thermal stability.
What are the typical applications of BAR 95-02LS E6327?
- This epoxy resin system is commonly used in composite manufacturing, aerospace components, electronic encapsulation, and structural bonding applications.
What are the key properties of BAR 95-02LS E6327?
- BAR 95-02LS E6327 exhibits high strength, low viscosity for easy application, excellent electrical insulation properties, and good resistance to moisture and chemicals.
How is BAR 95-02LS E6327 typically processed?
- It can be processed using various methods such as hand lay-up, vacuum infusion, or resin transfer molding (RTM) depending on the specific application requirements.
What are the recommended curing conditions for BAR 95-02LS E6327?
- The typical curing conditions involve a gradual temperature ramp-up to achieve full cure, often requiring post-curing at elevated temperatures for optimal performance.
Is BAR 95-02LS E6327 compatible with other materials?
- Yes, it is compatible with a wide range of reinforcements such as carbon fiber, glass fiber, and aramid, as well as various fillers and additives for tailored properties.
What safety precautions should be taken when handling BAR 95-02LS E6327?
- Users should wear appropriate personal protective equipment (PPE) including gloves and eye protection, and work in a well-ventilated area to minimize exposure to vapors.
Can BAR 95-02LS E6327 be used for outdoor applications?
- Yes, it has good UV resistance and weatherability, making it suitable for outdoor applications where long-term durability is required.
What are the storage recommendations for BAR 95-02LS E6327?
- It should be stored in a cool, dry place away from direct sunlight and sources of heat, and ideally kept in sealed containers to prevent moisture absorption.
Are there any special considerations for machining or finishing parts made with BAR 95-02LS E6327?
- Machining and finishing can be performed using standard techniques, but it's important to use appropriate dust extraction and protective measures due to potential airborne particles during processing.