BSS126L6327HTSA1

Product Overview

Use

It is commonly used for switching applications in various electronic circuits.

Characteristics

Low on-resistance
High-speed switching
Low gate charge
Enhanced ruggedness

Package

The BSS126L6327HTSA1 is typically available in a SOT-23 package.

Essence

This MOSFET is essential for efficient power management and control in electronic devices.

Packaging/Quantity

It is usually supplied in reels with a quantity of 3000 units per reel.

Specifications

Drain-Source Voltage (VDS): 100V
Continuous Drain Current (ID): 240mA
On-Resistance (RDS(on)): 3.5 Ohms
Power Dissipation (PD): 225mW
Gate-Source Voltage (VGS): ±20V

Detailed Pin Configuration

The BSS126L6327HTSA1 has three pins: 1. Source (S) 2. Gate (G) 3. Drain (D)

Functional Features

Fast switching speed
Low power dissipation
High input impedance
Reliable performance under high voltage conditions

Advantages

Efficient power management
Compact size
Suitable for low-voltage applications
Enhanced ruggedness for reliability

Disadvantages

Limited current handling capacity
Sensitivity to static discharge

Working Principles

The BSS126L6327HTSA1 operates based on the principle of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals.

Detailed Application Field Plans

The BSS126L6327HTSA1 is widely used in: - Battery management systems - DC-DC converters - LED lighting - Portable electronics

Detailed and Complete Alternative Models

Some alternative models to BSS126L6327HTSA1 include: - IRF3708PBF - FQP30N06L - NDP6020P

In conclusion, the BSS126L6327HTSA1 power MOSFET offers efficient switching capabilities and is suitable for various low-power electronic applications.

[Word count: 298]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق BSS126L6327HTSA1 في الحلول التقنية

What is BSS126L6327HTSA1?
- BSS126L6327HTSA1 is a N-channel enhancement mode field-effect transistor (FET) commonly used in electronic circuits for switching and amplification.
What are the key specifications of BSS126L6327HTSA1?
- The key specifications include a maximum drain-source voltage of 240V, a continuous drain current of 240mA, and a low threshold voltage of 1V.
How can BSS126L6327HTSA1 be used in technical solutions?
- BSS126L6327HTSA1 can be used in technical solutions for applications such as power management, load switching, LED lighting control, and battery protection.
What are the typical operating conditions for BSS126L6327HTSA1?
- The typical operating conditions include a gate-source voltage (VGS) of ±20V, a drain current (ID) of 240mA, and an ambient temperature range of -55°C to 150°C.
Can BSS126L6327HTSA1 be used in automotive applications?
- Yes, BSS126L6327HTSA1 is suitable for automotive applications due to its high voltage and current handling capabilities.
What are the advantages of using BSS126L6327HTSA1 in technical solutions?
- The advantages include low threshold voltage, high voltage capability, low on-resistance, and compatibility with automated assembly processes.
Are there any application notes or reference designs available for BSS126L6327HTSA1?
- Yes, application notes and reference designs are available from the manufacturer to assist in the proper implementation of BSS126L6327HTSA1 in various technical solutions.
What are the recommended PCB layout considerations for BSS126L6327HTSA1?
- It is recommended to minimize loop area for high-current paths, provide adequate thermal relief for the drain pad, and ensure proper grounding and decoupling for optimal performance.
Can BSS126L6327HTSA1 be used in low-power applications?
- While BSS126L6327HTSA1 is capable of handling higher currents, it can also be used in low-power applications by operating within the specified limits.
Where can I find detailed technical documentation for BSS126L6327HTSA1?
- Detailed technical documentation, including datasheets, application notes, and design resources, can be found on the manufacturer's website or through authorized distributors.