Infineon Technologies
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
BSS84PH6327XTSA1
عرض التفاصيل جداول البيانات

BSS84PH6327XTSA1

Product Overview

Category

The BSS84PH6327XTSA1 belongs to the category of small-signal field-effect transistors (FETs).

Use

It is commonly used as a switching device in various electronic circuits, such as amplifiers, voltage converters, and power management applications.

Characteristics

  • Low threshold voltage
  • High input impedance
  • Low output capacitance
  • Fast switching speed

Package

The BSS84PH6327XTSA1 is typically available in a SOT-23 surface-mount package.

Essence

This FET is essential for controlling the flow of current in electronic circuits, enabling efficient signal amplification and voltage regulation.

Packaging/Quantity

It is usually supplied in reels containing a specific quantity, typically 3000 units per reel.

Specifications

  • Drain-Source Voltage (VDS): 50V
  • Continuous Drain Current (ID): 130mA
  • Total Power Dissipation (PD): 330mW
  • Gate-Source Voltage (VGS): ±20V
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The BSS84PH6327XTSA1 has three pins: 1. Source (S) 2. Gate (G) 3. Drain (D)

Functional Features

  • Low on-resistance
  • Enhanced power dissipation capability
  • High-speed switching performance

Advantages and Disadvantages

Advantages

  • Small form factor
  • Low power consumption
  • Suitable for low-voltage applications

Disadvantages

  • Limited maximum voltage and current ratings
  • Sensitivity to electrostatic discharge (ESD)

Working Principles

The BSS84PH6327XTSA1 operates based on the principle of field-effect modulation, where the voltage applied to the gate terminal controls the conductivity between the source and drain terminals, allowing for precise control of current flow.

Detailed Application Field Plans

Audio Amplifiers

The FET can be utilized in audio amplifier circuits to control the amplification of audio signals with minimal distortion.

Voltage Regulators

In voltage regulator circuits, the BSS84PH6327XTSA1 can be employed to regulate the output voltage by controlling the current flow.

Signal Switching

It can be used in electronic switches to control the flow of signals in digital and analog circuits.

Detailed and Complete Alternative Models

  • BSS138: A similar small-signal FET with comparable specifications and package type.
  • 2N7002: Another alternative FET suitable for low-power applications.

In conclusion, the BSS84PH6327XTSA1 is a versatile small-signal FET with various applications in electronic circuits, offering advantages such as compact size and low power consumption, while also having limitations related to voltage and current ratings. Understanding its specifications and working principles is crucial for effectively integrating it into electronic designs.

[Word Count: 411]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق BSS84PH6327XTSA1 في الحلول التقنية

Sure, here are 10 common questions and answers related to the application of BSS84PH6327XTSA1 in technical solutions:

  1. What is the BSS84PH6327XTSA1 transistor used for?

    • The BSS84PH6327XTSA1 is a P-channel enhancement mode field-effect transistor (FET) commonly used for switching applications in portable electronics, power management, and battery-powered systems.

  2. What is the maximum drain-source voltage rating of the BSS84PH6327XTSA1?

    • The maximum drain-source voltage rating of the BSS84PH6327XTSA1 is typically around 50V.

  3. What is the maximum continuous drain current of the BSS84PH6327XTSA1?

    • The maximum continuous drain current of the BSS84PH6327XTSA1 is typically around 130mA.

  4. What are the typical applications of the BSS84PH6327XTSA1?

    • Typical applications of the BSS84PH6327XTSA1 include load switching, power management in portable devices, battery protection, and low voltage control circuits.

  5. What is the gate threshold voltage of the BSS84PH6327XTSA1?

    • The gate threshold voltage of the BSS84PH6327XTSA1 is typically around -0.6V to -1.5V.

  6. Is the BSS84PH6327XTSA1 suitable for use in low power applications?

    • Yes, the BSS84PH6327XTSA1 is suitable for use in low power applications due to its low threshold voltage and low on-state resistance.

  7. Can the BSS84PH6327XTSA1 be used for level shifting applications?

    • Yes, the BSS84PH6327XTSA1 can be used for level shifting applications due to its low threshold voltage and high input impedance.

  8. What is the typical on-state resistance of the BSS84PH6327XTSA1?

    • The typical on-state resistance of the BSS84PH6327XTSA1 is around 2.5 ohms.

  9. Does the BSS84PH6327XTSA1 require a heat sink for normal operation?

    • No, the BSS84PH6327XTSA1 typically does not require a heat sink for normal operation in low power applications.

  10. Is the BSS84PH6327XTSA1 suitable for use in automotive electronics?

    • Yes, the BSS84PH6327XTSA1 is suitable for use in automotive electronics due to its ability to handle moderate voltages and currents.

I hope these questions and answers provide the information you were looking for! If you have any more specific questions, feel free to ask.