Infineon Technologies
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
BTS707
عرض التفاصيل جداول البيانات

BTS707

Product Overview

  • Category: Power Transistor
  • Use: Control and switching of high current loads in automotive applications
  • Characteristics: High power handling capability, low on-resistance, fast switching speed
  • Package: TO-220AB
  • Essence: N-channel vertical power MOSFET
  • Packaging/Quantity: Tape and reel, 1000 units per reel

Specifications

  • Voltage Rating: 60V
  • Current Rating: 70A
  • On-Resistance: 6.5mΩ
  • Gate Threshold Voltage: 2.5V
  • Gate-Source Voltage (Max): ±20V
  • Continuous Drain Current (Tc = 25°C): 70A
  • Pulsed Drain Current (Tc = 25°C): 280A
  • Operating Temperature Range: -55°C to +175°C

Detailed Pin Configuration

The BTS707 power transistor has a TO-220AB package with three pins:

  1. Pin 1 (Gate): Connects to the gate terminal for controlling the transistor's operation.
  2. Pin 2 (Drain): Connects to the drain terminal for the flow of current.
  3. Pin 3 (Source): Connects to the source terminal for completing the current path.

Functional Features

  • High power handling capability allows control and switching of high current loads.
  • Low on-resistance minimizes power losses and improves efficiency.
  • Fast switching speed enables rapid response in automotive applications.
  • Built-in protection features such as overtemperature shutdown and overcurrent protection enhance reliability.

Advantages and Disadvantages

Advantages: - High power handling capability - Low on-resistance - Fast switching speed - Built-in protection features

Disadvantages: - Limited voltage rating (60V) - Relatively high gate threshold voltage (2.5V)

Working Principles

The BTS707 is a N-channel vertical power MOSFET that operates based on the principles of metal-oxide-semiconductor field-effect transistors (MOSFETs). When a suitable voltage is applied to the gate terminal, it creates an electric field that controls the flow of current between the drain and source terminals.

Detailed Application Field Plans

The BTS707 power transistor finds extensive use in various automotive applications, including:

  1. Electric power steering systems
  2. Electric braking systems
  3. Electric vehicle powertrain control
  4. Battery management systems
  5. Motor control units

Detailed and Complete Alternative Models

  1. Infineon Technologies - BTS716G
  2. STMicroelectronics - STP75NF75
  3. ON Semiconductor - NTMFS5C628NL

These alternative models offer similar specifications and functionality to the BTS707 and can be considered as alternatives depending on specific application requirements.

In conclusion, the BTS707 power transistor is a high-performance device designed for controlling and switching high current loads in automotive applications. With its excellent power handling capability, low on-resistance, and fast switching speed, it offers significant advantages in terms of efficiency and reliability. However, it has limitations in terms of voltage rating and gate threshold voltage. Its detailed pin configuration, functional features, working principles, and application field plans make it a valuable component in various automotive systems. Additionally, alternative models from different manufacturers provide flexibility in choosing the most suitable option for specific applications.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق BTS707 في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of BTS707 in technical solutions:

  1. Q: What is BTS707?
    A: BTS707 is a type of power switch, specifically a high-side power switch, commonly used in automotive and industrial applications.

  2. Q: What is the maximum voltage rating of BTS707?
    A: The maximum voltage rating of BTS707 can vary depending on the specific model, but it is typically around 60V.

  3. Q: What is the maximum current rating of BTS707?
    A: Again, the maximum current rating can vary, but it is usually in the range of 5A to 20A.

  4. Q: What are some typical applications of BTS707?
    A: BTS707 is often used in various automotive systems such as lighting control, motor control, and power distribution. It is also utilized in industrial automation and other technical solutions where high-side switching is required.

  5. Q: How does BTS707 work?
    A: BTS707 operates by controlling the flow of current through an external load connected to its output pin. It uses a built-in MOSFET transistor to achieve this.

  6. Q: Can BTS707 handle short-circuit conditions?
    A: Yes, BTS707 is designed to handle short-circuit conditions. It incorporates protection features like overcurrent and thermal shutdown to ensure safe operation.

  7. Q: Is BTS707 compatible with microcontrollers or other digital control systems?
    A: Yes, BTS707 can be easily controlled by microcontrollers or other digital control systems. It typically accepts logic-level inputs for switching on/off.

  8. Q: Are there any special considerations when using BTS707?
    A: It is important to consider factors like heat dissipation, voltage spikes, and proper PCB layout to ensure optimal performance and reliability of BTS707.

  9. Q: Can BTS707 be used in high-temperature environments?
    A: Yes, BTS707 is designed to operate in a wide temperature range, typically from -40°C to 150°C, making it suitable for various industrial applications.

  10. Q: Are there any alternatives to BTS707?
    A: Yes, there are other similar high-side power switches available in the market, such as TLE7259-3GE or BTS50085-1TMB. The choice depends on specific requirements and application needs.

Please note that the answers provided here are general and may vary depending on the specific model and manufacturer of BTS707.