Infineon Technologies
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
IPI100N04S4H2AKSA1
عرض التفاصيل جداول البيانات

IPI100N04S4H2AKSA1

Product Overview

Category

The IPI100N04S4H2AKSA1 belongs to the category of power MOSFETs.

Use

It is used as a high-performance switching device in various electronic circuits and applications.

Characteristics

  • High voltage capability
  • Low on-resistance
  • Fast switching speed
  • Low gate charge
  • Excellent thermal performance

Package

The IPI100N04S4H2AKSA1 is typically available in a TO-220 package.

Essence

This MOSFET is essential for efficient power management and control in electronic systems.

Packaging/Quantity

It is commonly packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Drain-Source Voltage (VDS): 40V
  • Continuous Drain Current (ID): 100A
  • On-Resistance (RDS(on)): 4mΩ
  • Gate-Source Voltage (VGS): ±20V
  • Total Gate Charge (Qg): 60nC
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The IPI100N04S4H2AKSA1 typically has three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • High current-carrying capability
  • Low conduction losses
  • Fast switching characteristics
  • Suitable for high-frequency applications

Advantages and Disadvantages

Advantages

  • Low on-resistance leads to reduced power dissipation
  • High current handling capacity
  • Enhanced thermal performance
  • Suitable for high-power applications

Disadvantages

  • Higher gate capacitance may require careful driver design
  • Sensitivity to static electricity and overvoltage conditions

Working Principles

The IPI100N04S4H2AKSA1 operates based on the principles of field-effect transistors, where the application of a voltage at the gate terminal controls the flow of current between the drain and source terminals.

Detailed Application Field Plans

The IPI100N04S4H2AKSA1 is widely used in the following applications: - Switch-mode power supplies - Motor control systems - Inverters and converters - Automotive electronics - Industrial automation

Detailed and Complete Alternative Models

Some alternative models to the IPI100N04S4H2AKSA1 include: - IRF1405 - FDP8878 - STP80NF70

In conclusion, the IPI100N04S4H2AKSA1 power MOSFET offers high-performance characteristics suitable for a wide range of power management and control applications, making it a valuable component in modern electronic systems.

[Word Count: 366]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق IPI100N04S4H2AKSA1 في الحلول التقنية

Sure, here are 10 common questions and answers related to the application of IPI100N04S4H2AKSA1 in technical solutions:

  1. What is the maximum drain current of IPI100N04S4H2AKSA1?

    • The maximum drain current is 100A.

  2. What is the maximum voltage rating of IPI100N04S4H2AKSA1?

    • The maximum voltage rating is 40V.

  3. What type of package does IPI100N04S4H2AKSA1 come in?

    • It comes in a TO-262 package.

  4. What is the typical on-resistance of IPI100N04S4H2AKSA1?

    • The typical on-resistance is 4mΩ.

  5. What are the typical applications for IPI100N04S4H2AKSA1?

    • It is commonly used in motor control, power supplies, and DC-DC converters.

  6. What is the gate charge of IPI100N04S4H2AKSA1?

    • The gate charge is typically 60nC.

  7. Is IPI100N04S4H2AKSA1 suitable for automotive applications?

    • Yes, it is suitable for automotive applications.

  8. What is the operating temperature range of IPI100N04S4H2AKSA1?

    • The operating temperature range is -55°C to 175°C.

  9. Does IPI100N04S4H2AKSA1 have built-in protection features?

    • Yes, it has built-in overcurrent protection and thermal shutdown.

  10. Can IPI100N04S4H2AKSA1 be used in high-frequency switching applications?

    • Yes, it is suitable for high-frequency switching due to its low on-resistance and gate charge characteristics.