Infineon Technologies
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
IPP80N06S2L11AKSA1
عرض التفاصيل جداول البيانات

IPP80N06S2L11AKSA1

Product Overview

Category: Power MOSFET
Use: Switching and amplification in power electronics
Characteristics: High current capacity, low on-resistance, fast switching speed
Package: TO-220
Essence: A power MOSFET designed for high-power applications
Packaging/Quantity: Typically sold individually

Specifications

  • Voltage Rating: 60V
  • Current Rating: 80A
  • On-Resistance: 8.5mΩ
  • Gate Threshold Voltage: 2-4V
  • Power Dissipation: 200W

Pin Configuration

  1. Gate (G)
  2. Drain (D)
  3. Source (S)

Functional Features

  • High current-carrying capability
  • Low on-resistance for minimal power loss
  • Fast switching speed for efficient operation

Advantages

  • Suitable for high-power applications
  • Low on-resistance reduces heat generation
  • Fast switching speed improves efficiency

Disadvantages

  • Higher cost compared to lower-rated MOSFETs
  • Requires careful handling due to high power capabilities

Working Principles

The IPP80N06S2L11AKSA1 operates based on the principle of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals. When a sufficient voltage is applied to the gate, the MOSFET allows a high current to flow from the drain to the source with minimal resistance.

Detailed Application Field Plans

  • High-power motor control
  • Power supply units
  • Inverters and converters
  • Audio amplifiers

Detailed and Complete Alternative Models

  1. IRFP4568PBF
  2. STP80NF55-06

In conclusion, the IPP80N06S2L11AKSA1 is a high-performance power MOSFET suitable for various high-power applications. Its combination of high current capacity, low on-resistance, and fast switching speed makes it an ideal choice for demanding power electronics designs.

[Word count: 271]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق IPP80N06S2L11AKSA1 في الحلول التقنية

  1. What is IPP80N06S2L11AKSA1?

    • IPP80N06S2L11AKSA1 is a power MOSFET transistor designed for high current applications, such as motor control, power supplies, and inverters.

  2. What is the maximum voltage and current rating of IPP80N06S2L11AKSA1?

    • The maximum voltage rating is 60V and the maximum continuous drain current is 80A.

  3. What are the typical applications of IPP80N06S2L11AKSA1?

    • IPP80N06S2L11AKSA1 is commonly used in applications such as motor drives, DC-DC converters, and battery management systems.

  4. What are the key features of IPP80N06S2L11AKSA1?

    • Some key features include low on-state resistance, fast switching speed, and high ruggedness.

  5. What is the thermal resistance of IPP80N06S2L11AKSA1?

    • The thermal resistance from junction to case (RthJC) is typically around 0.5°C/W.

  6. Can IPP80N06S2L11AKSA1 be used in automotive applications?

    • Yes, IPP80N06S2L11AKSA1 is suitable for automotive applications due to its high current handling capability and rugged design.

  7. Does IPP80N06S2L11AKSA1 require a heat sink for operation?

    • It is recommended to use a heat sink when operating IPP80N06S2L11AKSA1 at high currents or in high ambient temperatures to ensure proper thermal management.

  8. What is the gate-source voltage range for IPP80N06S2L11AKSA1?

    • The gate-source voltage (Vgs) typically ranges from -20V to +20V.

  9. Is IPP80N06S2L11AKSA1 suitable for switching applications?

    • Yes, IPP80N06S2L11AKSA1 is well-suited for high-speed switching applications due to its fast switching speed.

  10. Are there any recommended driver circuits for IPP80N06S2L11AKSA1?

    • It is recommended to use a gate driver circuit capable of providing sufficient gate-source voltage and current to ensure optimal performance of IPP80N06S2L11AKSA1.