10M08DAF256C8GES

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Digital Logic Device
• Characteristics: Low-power, High-performance
• Package: 256-ball FineLine BGA
• Essence: Field Programmable Gate Array (FPGA)
• Packaging/Quantity: Tray, 250 units per tray

Specifications

• Manufacturer: Intel Corporation
• Family: MAX® 10
• Series: 10M08D
• Device: 10M08DAF256C8GES
• Technology: Flash-based CMOS
• Logic Elements: 8,000
• RAM Bits: 414,720
• Operating Voltage: 1.2V
• Speed Grade: -8
• I/O Pins: 256
• Temperature Range: -40°C to +100°C

Detailed Pin Configuration

The 10M08DAF256C8GES has a total of 256 I/O pins, which are arranged in a specific configuration. The pinout diagram and detailed pin descriptions can be found in the manufacturer's datasheet.

Functional Features

• Flash memory-based FPGA with reprogrammable logic elements.
• Low-power consumption for energy-efficient applications.
• High-performance capabilities suitable for various digital logic designs.
• Built-in security features to protect intellectual property.
• Support for multiple I/O standards and interfaces.
• On-chip analog-to-digital converters (ADCs) for mixed-signal applications.

Advantages and Disadvantages

Advantages: - Flexibility and reprogrammability allow for design changes without hardware modifications. - Lower development costs compared to custom ASICs. - Faster time-to-market due to shorter design cycles. - Integration of multiple functions into a single device. - Ability to prototype and test complex digital systems.

Disadvantages: - Higher power consumption compared to dedicated hardware solutions. - Limited performance compared to specialized ASICs in certain applications. - Higher cost per unit compared to mass-produced standard components. - Complexity of programming and configuring the FPGA.

Working Principles

The 10M08DAF256C8GES is based on flash memory technology, which allows for the reconfiguration of logic elements. The device consists of a matrix of programmable logic blocks interconnected through configurable routing resources. These logic blocks can be programmed to implement various digital functions, such as combinational and sequential circuits.

The FPGA's configuration is stored in the on-chip flash memory, allowing for easy reprogramming. During operation, the device reads the configuration data from the flash memory and configures the logic elements accordingly. This flexibility enables the FPGA to adapt to different application requirements.

Detailed Application Field Plans

The 10M08DAF256C8GES FPGA finds applications in various fields, including:

1. Communications: Used in wireless base stations, network switches, and routers for signal processing, protocol handling, and data encryption.
2. Industrial Automation: Employed in control systems, motor drives, and robotics for real-time control and monitoring.
3. Automotive: Integrated into advanced driver assistance systems (ADAS), infotainment systems, and engine control units (ECUs) for enhanced functionality and performance.
4. Consumer Electronics: Utilized in high-definition televisions, gaming consoles, and audio/video processing devices for multimedia processing and connectivity.
5. Medical Devices: Incorporated into medical imaging equipment, patient monitoring systems, and laboratory instruments for data acquisition and processing.

Detailed and Complete Alternative Models

1. 10M02SCU169C8G: Smaller variant with 2,000 logic elements and 169 I/O pins.
2. 10M16SAE144C8G: Larger variant with 16,000 logic elements and 144 I/O pins.
3. 10M25SCE144C8G: Higher-performance variant with 25,000 logic elements and 144 I/O pins.

These alternative models offer different combinations of logic capacity and I/O pin count to cater to specific application requirements.

Note: The content provided above is a sample entry and may not reflect the actual specifications and details of the mentioned product.