Intersil
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
ID82C52
عرض التفاصيل جداول البيانات

ID82C52

Product Overview

Category

ID82C52 belongs to the category of integrated circuits (ICs).

Use

The ID82C52 IC is primarily used for data communication and control applications.

Characteristics

  • High-speed operation
  • Low power consumption
  • Compact size
  • Reliable performance

Package

ID82C52 is available in a standard dual in-line package (DIP) with 40 pins.

Essence

The essence of ID82C52 lies in its ability to facilitate efficient data communication and control in various electronic devices.

Packaging/Quantity

ID82C52 is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of ICs. The exact quantity may vary depending on the manufacturer.

Specifications

  • Supply voltage: 5V ±10%
  • Operating temperature range: -40°C to +85°C
  • Maximum clock frequency: 16 MHz
  • Number of I/O lines: 32
  • Data bus width: 8 bits
  • Interrupt capability: Yes
  • Timers/counters: 3

Detailed Pin Configuration

  1. VCC
  2. GND
  3. XTAL1
  4. XTAL2
  5. RESET
  6. INT0
  7. INT1
  8. T0
  9. T1
  10. WR
  11. RD
  12. ALE
  13. PSEN
  14. EA
  15. A0
  16. A1
  17. A2
  18. A3
  19. A4
  20. A5
  21. A6
  22. A7
  23. D0
  24. D1
  25. D2
  26. D3
  27. D4
  28. D5
  29. D6
  30. D7
  31. P0
  32. P1
  33. P2
  34. P3
  35. P4
  36. P5
  37. P6
  38. P7
  39. RD
  40. WR

Functional Features

  • High-speed data transfer
  • Interrupt-driven I/O operations
  • Timer/counter functionality
  • Addressable memory space
  • Programmable I/O ports

Advantages and Disadvantages

Advantages

  • Fast and efficient data communication
  • Versatile functionality
  • Low power consumption
  • Compact size

Disadvantages

  • Limited number of I/O lines
  • Relatively small memory capacity

Working Principles

ID82C52 operates based on the principles of digital logic circuits. It utilizes a clock signal to synchronize data transfer and control operations. The IC processes input signals, performs necessary calculations or operations, and generates output signals accordingly.

Detailed Application Field Plans

ID82C52 finds applications in various fields, including but not limited to: - Industrial automation - Robotics - Communication systems - Embedded systems - Control systems

Alternative Models

Some alternative models that offer similar functionality to ID82C52 include: - ID82C55 - ID82C54 - ID82C51 - ID82C59

These models can be considered as alternatives depending on specific requirements and compatibility with the target system.

Word count: 440 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق ID82C52 في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of ID82C52 in technical solutions:

  1. Q: What is ID82C52? A: ID82C52 is a programmable peripheral interface chip commonly used in technical solutions for interfacing microprocessors with external devices.

  2. Q: What are the key features of ID82C52? A: The key features of ID82C52 include 8-bit bidirectional data bus, three 16-bit timers/counters, interrupt control, and parallel I/O ports.

  3. Q: How can ID82C52 be used in technical solutions? A: ID82C52 can be used to connect microprocessors with various external devices such as sensors, displays, keyboards, and other peripherals.

  4. Q: How many I/O ports does ID82C52 have? A: ID82C52 has two 8-bit parallel I/O ports, Port A and Port B, which can be configured as input or output ports.

  5. Q: Can ID82C52 handle interrupts? A: Yes, ID82C52 has interrupt capability. It supports both maskable and non-maskable interrupts, allowing efficient handling of time-critical events.

  6. Q: What is the maximum clock frequency supported by ID82C52? A: ID82C52 can operate at a maximum clock frequency of 12 MHz, making it suitable for high-speed applications.

  7. Q: Can ID82C52 be programmed in different modes? A: Yes, ID82C52 can be programmed in four different modes: mode 0 (basic input/output), mode 1 (input/output with handshake), mode 2 (bidirectional bus), and mode 3 (strobe input/output).

  8. Q: How can I interface ID82C52 with a microprocessor? A: ID82C52 can be interfaced with a microprocessor using the address bus, data bus, control signals, and interrupt lines.

  9. Q: Can ID82C52 be used in both 5V and 3.3V systems? A: No, ID82C52 is designed for use in 5V systems only. It is not compatible with 3.3V systems without level shifting.

  10. Q: Are there any limitations or considerations when using ID82C52? A: Some considerations include proper handling of interrupts, ensuring correct timing and synchronization, and understanding the specific requirements of the external devices being interfaced. Additionally, ID82C52 may require additional support circuitry for certain applications.

Please note that these questions and answers are general and may vary depending on the specific implementation and context of using ID82C52 in technical solutions.