Intersil
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
ISL28266FUZ-T7
عرض التفاصيل جداول البيانات

ISL28266FUZ-T7

Product Overview

Category

ISL28266FUZ-T7 belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for signal amplification and conditioning.

Characteristics

  • High precision
  • Low noise
  • Wide bandwidth
  • Low power consumption

Package

ISL28266FUZ-T7 is available in a small outline package (SOP) with a specific pin configuration.

Essence

The essence of ISL28266FUZ-T7 lies in its ability to provide accurate and reliable signal amplification, making it suitable for various applications.

Packaging/Quantity

ISL28266FUZ-T7 is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply voltage: 2.7V to 5.5V
  • Input offset voltage: ±1mV
  • Gain bandwidth product: 10MHz
  • Input bias current: 50nA
  • Output current: ±20mA
  • Operating temperature range: -40°C to +125°C

Detailed Pin Configuration

ISL28266FUZ-T7 has a total of 8 pins, which are labeled as follows:

  1. V-
  2. IN-
  3. IN+
  4. V+
  5. OUT
  6. NC
  7. VCC
  8. GND

Functional Features

  • Rail-to-rail input and output
  • Low input offset voltage
  • High common-mode rejection ratio
  • Low quiescent current
  • Short-circuit protection

Advantages and Disadvantages

Advantages

  • High precision amplification
  • Wide operating voltage range
  • Low power consumption
  • Excellent noise performance

Disadvantages

  • Limited output current capability
  • Relatively high cost compared to some alternatives

Working Principles

ISL28266FUZ-T7 operates based on the principles of differential amplification. It takes the input signal, amplifies it with high precision, and provides an amplified output signal.

Detailed Application Field Plans

ISL28266FUZ-T7 finds applications in various fields, including: 1. Medical devices 2. Industrial automation 3. Audio equipment 4. Instrumentation 5. Communication systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as substitutes for ISL28266FUZ-T7 are: 1. AD8221 2. LT1167 3. MCP6022 4. MAX4239

These models offer similar functionality and characteristics, providing options for different design requirements.

Note: The content provided above is a general structure for an encyclopedia entry and may require further elaboration and specific details based on the actual product information.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق ISL28266FUZ-T7 في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of ISL28266FUZ-T7 in technical solutions:

  1. Q: What is ISL28266FUZ-T7? A: ISL28266FUZ-T7 is a dual operational amplifier (op-amp) designed for various applications in industrial, automotive, and consumer electronics.

  2. Q: What is the supply voltage range for ISL28266FUZ-T7? A: The supply voltage range for ISL28266FUZ-T7 is typically between 2.7V and 36V.

  3. Q: Can ISL28266FUZ-T7 operate at high temperatures? A: Yes, ISL28266FUZ-T7 has a wide temperature range and can operate reliably at temperatures up to 125°C.

  4. Q: What is the input offset voltage of ISL28266FUZ-T7? A: The input offset voltage of ISL28266FUZ-T7 is typically around 1mV.

  5. Q: Does ISL28266FUZ-T7 have rail-to-rail inputs and outputs? A: Yes, ISL28266FUZ-T7 features rail-to-rail inputs and outputs, allowing it to handle signals close to the supply rails.

  6. Q: What is the bandwidth of ISL28266FUZ-T7? A: The bandwidth of ISL28266FUZ-T7 is typically around 10MHz.

  7. Q: Can ISL28266FUZ-T7 be used in single-supply applications? A: Yes, ISL28266FUZ-T7 can be used in both single-supply and split-supply configurations.

  8. Q: Is ISL28266FUZ-T7 suitable for low-power applications? A: Yes, ISL28266FUZ-T7 has a low quiescent current of typically 1.3mA, making it suitable for low-power designs.

  9. Q: Does ISL28266FUZ-T7 have built-in protection features? A: Yes, ISL28266FUZ-T7 includes built-in features like thermal shutdown and short-circuit protection to ensure safe operation.

  10. Q: What package does ISL28266FUZ-T7 come in? A: ISL28266FUZ-T7 is available in an industry-standard 8-lead SOIC package, which is easy to solder and integrate into various designs.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.